[U-Boot] [PATCH 5/8] tegra: usb: move controller init into start_port

[Marek Vasut]

Dear Lucas Stach,

> There is no need to init a USB controller before the upper layers indicate
> that they are actually going to use it.
> 
> board_usb_init now only parses the device tree and sets up the common pll.
> 
> Signed-off-by: Lucas Stach <dev at lynxeye.de>
> ---
>  arch/arm/cpu/armv7/tegra20/usb.c | 47
> +++++++++++++++------------------------- 1 Datei geändert, 18 Zeilen
> hinzugefügt(+), 29 Zeilen entfernt(-)
> 
> diff --git a/arch/arm/cpu/armv7/tegra20/usb.c
> b/arch/arm/cpu/armv7/tegra20/usb.c index cf800b1..e372b8b 100644
> --- a/arch/arm/cpu/armv7/tegra20/usb.c
> +++ b/arch/arm/cpu/armv7/tegra20/usb.c
> @@ -417,44 +417,29 @@ static int init_ulpi_usb_controller(struct fdt_usb
> *config) }
>  #endif
> 
> -/**
> - * Add a new USB port to the list of available ports.
> - *
> - * @param config	USB port configuration
> - * @return 0 if ok, -1 if error (too many ports)
> - */
> -static int add_port(struct fdt_usb *config)

Fix the comment instead of removing it?

[...]

Best regards,
Marek Vasut