[U-Boot] [PATCH 07/20] ahci: cosmetics and cleanup

[Simon Glass]

From: Stefan Reinauer <reinauer at chromium.org>

- print the correct speed
- print all the AHCI capability flags
(information taken from Linux kernel driver)
- clean up some comments

For example, this might show the following string:
AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3 impl SATA mode

Signed-off-by: Stefan Reinauer <reinauer at chromium.org>

Commit-Ready: Stefan Reinauer <reinauer at chromium.org>
Signed-off-by: Simon Glass <sjg at chromium.org>
Tested-by: Stefan Reinauer <reinauer at chromium.org>
---
 drivers/block/ahci.c |   25 ++++++++++++++++++-------
 include/ahci.h       |    1 +
 2 files changed, 19 insertions(+), 7 deletions(-)

diff --git a/drivers/block/ahci.c b/drivers/block/ahci.c
index af31c97..0a7ad81 100644
--- a/drivers/block/ahci.c
+++ b/drivers/block/ahci.c
@@ -194,7 +194,7 @@ static int ahci_host_init(struct ahci_probe_ent *probe_ent)
 		/* set irq mask (enables interrupts) */
 		writel(DEF_PORT_IRQ, port_mmio + PORT_IRQ_MASK);
 
-		/*register linkup ports */
+		/* register linkup ports */
 		tmp = readl(port_mmio + PORT_SCR_STAT);
 		debug("Port %d status: 0x%x\n", i, tmp);
 		if ((tmp & 0xf) == 0x03)
@@ -222,12 +222,13 @@ static void ahci_print_info(struct ahci_probe_ent *probe_ent)
 	u16 cc;
 #endif
 	volatile u8 *mmio = (volatile u8 *)probe_ent->mmio_base;
-	u32 vers, cap, impl, speed;
+	u32 vers, cap, cap2, impl, speed;
 	const char *speed_s;
 	const char *scc_s;
 
 	vers = readl(mmio + HOST_VERSION);
 	cap = probe_ent->cap;
+	cap2 = readl(mmio + HOST_CAP2);
 	impl = probe_ent->port_map;
 
 	speed = (cap >> 20) & 0xf;
@@ -235,6 +236,8 @@ static void ahci_print_info(struct ahci_probe_ent *probe_ent)
 		speed_s = "1.5";
 	else if (speed == 2)
 		speed_s = "3";
+	else if (speed == 3)
+		speed_s = "6";
 	else
 		speed_s = "?";
 
@@ -260,8 +263,9 @@ static void ahci_print_info(struct ahci_probe_ent *probe_ent)
 	       ((cap >> 8) & 0x1f) + 1, (cap & 0x1f) + 1, speed_s, impl, scc_s);
 
 	printf("flags: "
-	       "%s%s%s%s%s%s"
-	       "%s%s%s%s%s%s%s\n",
+	       "%s%s%s%s%s%s%s"
+	       "%s%s%s%s%s%s%s"
+	       "%s%s%s%s%s%s\n",
 	       cap & (1 << 31) ? "64bit " : "",
 	       cap & (1 << 30) ? "ncq " : "",
 	       cap & (1 << 28) ? "ilck " : "",
@@ -272,9 +276,16 @@ static void ahci_print_info(struct ahci_probe_ent *probe_ent)
 	       cap & (1 << 19) ? "nz " : "",
 	       cap & (1 << 18) ? "only " : "",
 	       cap & (1 << 17) ? "pmp " : "",
+	       cap & (1 << 16) ? "fbss " : "",
 	       cap & (1 << 15) ? "pio " : "",
 	       cap & (1 << 14) ? "slum " : "",
-	       cap & (1 << 13) ? "part " : "");
+	       cap & (1 << 13) ? "part " : "",
+	       cap & (1 << 7) ? "ccc " : "",
+	       cap & (1 << 6) ? "ems " : "",
+	       cap & (1 << 5) ? "sxs " : "",
+	       cap2 & (1 << 2) ? "apst " : "",
+	       cap2 & (1 << 1) ? "nvmp " : "",
+	       cap2 & (1 << 0) ? "boh " : "");
 }
 
 #ifndef CONFIG_SCSI_AHCI_PLAT
@@ -369,7 +380,7 @@ static void ahci_set_feature(u8 port)
 	u32 cmd_fis_len = 5;	/* five dwords */
 	u8 fis[20];
 
-	/*set feature */
+	/* set feature */
 	memset(fis, 0, 20);
 	fis[0] = 0x27;
 	fis[1] = 1 << 7;
@@ -383,7 +394,7 @@ static void ahci_set_feature(u8 port)
 	readl(port_mmio + PORT_CMD_ISSUE);
 
 	if (waiting_for_cmd_completed(port_mmio + PORT_CMD_ISSUE, 150, 0x1)) {
-		printf("set feature error!\n");
+		printf("set feature error on port %d!\n", port);
 	}
 }
 
diff --git a/include/ahci.h b/include/ahci.h
index c4fb9e7..babbdc6 100644
--- a/include/ahci.h
+++ b/include/ahci.h
@@ -51,6 +51,7 @@
 #define HOST_IRQ_STAT		0x08 /* interrupt status */
 #define HOST_PORTS_IMPL		0x0c /* bitmap of implemented ports */
 #define HOST_VERSION		0x10 /* AHCI spec. version compliancy */
+#define HOST_CAP2		0x24 /* host capabilities, extended */
 
 /* HOST_CTL bits */
 #define HOST_RESET		(1 << 0)  /* reset controller; self-clear */
-- 
1.7.7.3