[U-Boot] [PATCH V1 0/5] prepare for mx6dl/ mx6solo
Troy Kisky
troy.kisky at boundarydevices.com
Tue Oct 23 22:57:45 CEST 2012
Each patch in this series should be able to be applied
independently of the others.
These patch have been seen before but I marked this as version
1, because they were in the middle of another series previously.
Troy Kisky (5):
mx6: soc: update get_cpu_rev and get_imx_type for mx6solo/sololite
mx6: use CONFIG_MX6 instead of CONFIG_MX6Q
imx-common: cpu: add imx_ddr_size
arch-mx6: add mx6dl_pins.h
imximage.cfg: run files through C preprocessor
.gitignore | 1 +
Makefile | 11 +-
arch/arm/cpu/armv7/mx6/soc.c | 32 ++-
arch/arm/imx-common/cpu.c | 66 +++++-
arch/arm/include/asm/arch-mx5/sys_proto.h | 10 +-
arch/arm/include/asm/arch-mx6/imx-regs.h | 2 +
arch/arm/include/asm/arch-mx6/mx6dl_pins.h | 149 +++++++++++++
arch/arm/include/asm/arch-mx6/sys_proto.h | 10 +-
board/esg/ima3-mx53/imximage.cfg | 120 ++++++-----
board/freescale/imx/ddr/mx6q_4x_mt41j128.cfg | 90 ++++----
board/freescale/mx25pdk/imximage.cfg | 77 +++----
board/freescale/mx51evk/imximage.cfg | 114 +++++-----
board/freescale/mx53ard/imximage_dd3.cfg | 83 ++++----
board/freescale/mx53evk/imximage.cfg | 86 ++++----
board/freescale/mx53loco/imximage.cfg | 83 ++++----
board/freescale/mx53smd/imximage.cfg | 83 ++++----
board/freescale/mx6qarm2/imximage.cfg | 88 ++++----
board/freescale/mx6qsabreauto/imximage.cfg | 82 +++----
board/genesi/mx51_efikamx/imximage_mx.cfg | 132 ++++++------
board/genesi/mx51_efikamx/imximage_sb.cfg | 126 +++++------
board/ttcontrol/vision2/imximage_hynix.cfg | 295 ++++++++++++++------------
drivers/gpio/mxc_gpio.c | 6 +-
drivers/video/ipu_regs.h | 2 +-
include/configs/mx6qarm2.h | 1 +
include/configs/mx6qsabre_common.h | 1 +
include/configs/mx6qsabrelite.h | 1 +
26 files changed, 1036 insertions(+), 715 deletions(-)
create mode 100644 arch/arm/include/asm/arch-mx6/mx6dl_pins.h
--
1.7.9.5
More information about the U-Boot
mailing list