[U-Boot] [PATCH v7 08/16] tegra: Add LCD support to Nvidia boards

[Simon Glass]

Add calls to the LCD driver from Nvidia board code.

Signed-off-by: Simon Glass <sjg at chromium.org>
---
Changes in v7:
- Rebase onto upstream/master

Changes in v4:
- Change order of LCD init so that PWM comes first

Changes in v3:
- Add separate call to pwm_init() in board_init()

 board/nvidia/common/board.c |   19 +++++++++++++++++++
 1 files changed, 19 insertions(+), 0 deletions(-)

diff --git a/board/nvidia/common/board.c b/board/nvidia/common/board.c
index f23c87d..76ec687 100644
--- a/board/nvidia/common/board.c
+++ b/board/nvidia/common/board.c
@@ -26,6 +26,7 @@
 #include <linux/compiler.h>
 #include <asm/io.h>
 #include <asm/arch/clock.h>
+#include <asm/arch/display.h>
 #include <asm/arch/emc.h>
 #include <asm/arch/funcmux.h>
 #include <asm/arch/pinmux.h>
@@ -124,6 +125,9 @@ int board_init(void)
 	if (pwm_init(gd->fdt_blob))
 		debug("%s: Failed to init pwm\n", __func__);
 #endif
+#ifdef CONFIG_LCD
+	tegra_lcd_check_next_stage(gd->fdt_blob, 0);
+#endif
 	/* boot param addr */
 	gd->bd->bi_boot_params = (NV_PA_SDRAM_BASE + 0x100);
 
@@ -149,6 +153,9 @@ int board_init(void)
 	pin_mux_usb();
 	board_usb_init(gd->fdt_blob);
 #endif
+#ifdef CONFIG_LCD
+	tegra_lcd_check_next_stage(gd->fdt_blob, 0);
+#endif
 
 #ifdef CONFIG_TEGRA_NAND
 	pin_mux_nand();
@@ -179,7 +186,19 @@ int board_early_init_f(void)
 	/* Initialize periph GPIOs */
 	gpio_early_init();
 	gpio_early_init_uart();
+#ifdef CONFIG_LCD
+	tegra_lcd_early_init(gd->fdt_blob);
+#endif
 
 	return 0;
 }
 #endif	/* EARLY_INIT */
+
+int board_late_init(void)
+{
+#ifdef CONFIG_LCD
+	/* Make sure we finish initing the LCD */
+	tegra_lcd_check_next_stage(gd->fdt_blob, 1);
+#endif
+	return 0;
+}
-- 
1.7.7.3