[U-Boot] [PATCH 3/3] i.MX6: mx6qsabrelite: Add splash screen support

Stefano Babic sbabic at denx.de
Wed Oct 10 14:09:41 CEST 2012


On 03/10/2012 19:28, Eric Nelson wrote:
> Adds support for HDMI, two LVDS panels and one RGB panel to
> the SABRE-Lite board.
> 
> Displays supported:
>          HDMI		- 1024 x 768 for maximum compatibility
>          Hannstar-XGA   - 1024 x 768 LVDS (Freescale part number MCIMX-LVDS1)
>          wsvga-lvds     - 1024 x 600 LVDS (Boundary p/n Nit6X_1024x600)
>          wvga-rgb       - 800 x 480 RGB (Boundary p/n Nit6X_800x480)
> 
> Since the ipuv3_fb display driver currently supports only a single display,
> this code auto-detects panel by probing the HDMI Phy for Hot Plug Detect
> or the I2C touch controller of the LVDS and RGB displays in the priority
> listed above.
> 
> Setting 'panel' environment variable to one of the names above will
> override auto-detection.
> 
> Signed-off-by: Eric Nelson <eric.nelson at boundarydevices.com>
> ---

Applied to u-boot-imx, next branch, thanks.

Best regards,
Stefano Babic




-- 
=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================


More information about the U-Boot mailing list