[U-Boot] [PATCH 3/8] tegra: usb: fold initial pll setup into board_usb_init
Lucas Stach
dev at lynxeye.de
Tue Oct 30 10:22:48 CET 2012
The setup is trivial, no need to split this out into a separate function.
Signed-off-by: Lucas Stach <dev at lynxeye.de>
---
arch/arm/cpu/armv7/tegra20/usb.c | 15 +++++----------
1 Datei geändert, 5 Zeilen hinzugefügt(+), 10 Zeilen entfernt(-)
diff --git a/arch/arm/cpu/armv7/tegra20/usb.c b/arch/arm/cpu/armv7/tegra20/usb.c
index 1725cd1..e61bd69 100644
--- a/arch/arm/cpu/armv7/tegra20/usb.c
+++ b/arch/arm/cpu/armv7/tegra20/usb.c
@@ -417,13 +417,6 @@ static int init_ulpi_usb_controller(struct fdt_usb *config)
}
#endif
-static void config_clock(const u32 timing[])
-{
- clock_start_pll(CLOCK_ID_USB,
- timing[PARAM_DIVM], timing[PARAM_DIVN], timing[PARAM_DIVP],
- timing[PARAM_CPCON], timing[PARAM_LFCON]);
-}
-
/**
* Add a new USB port to the list of available ports.
*
@@ -534,13 +527,15 @@ int board_usb_init(const void *blob)
{
struct fdt_usb config;
unsigned osc_freq = clock_get_rate(CLOCK_ID_OSC);
- enum clock_osc_freq freq;
int node_list[USB_PORTS_MAX];
int node, count, i;
+ u32 *timing;
/* Set up the USB clocks correctly based on our oscillator frequency */
- freq = clock_get_osc_freq();
- config_clock(usb_pll[freq]);
+ timing = usb_pll[clock_get_osc_freq()];
+ clock_start_pll(CLOCK_ID_USB,
+ timing[PARAM_DIVM], timing[PARAM_DIVN], timing[PARAM_DIVP],
+ timing[PARAM_CPCON], timing[PARAM_LFCON]);
/* count may return <0 on error */
count = fdtdec_find_aliases_for_id(blob, "usb",
--
1.7.11.7
More information about the U-Boot
mailing list