[U-Boot] [PATCH v2 04/10] change all versions of input_data() and output_data() to global weak aliases
Pavel Herrmann
morpheus.ibis at gmail.com
Tue Oct 9 19:04:39 CEST 2012
This changes input_data() and friends from static function to global symbols
under weak alias, to enable board specific overrides (and therefore get rid of
board-specific code in cmd_ide.c)
Also declare ide_bus_offset in the header file, so other files can use
ATA_CURR_BASE as well.
Signed-off-by: Pavel Herrmann <morpheus.ibis at gmail.com>
---
Changes for v2:
rebase on top of next
use "shorts" as a count parameter for the short-aligned I/O calls
board/esd/cpci750/ide.c | 1 -
board/linkstation/ide.c | 1 -
board/pcs440ep/pcs440ep.c | 1 -
common/cmd_ide.c | 57 ++++++++++++++++++++++++++++++-----------------
include/ide.h | 11 +++++++++
5 files changed, 48 insertions(+), 23 deletions(-)
diff --git a/board/esd/cpci750/ide.c b/board/esd/cpci750/ide.c
index aa001df..4ef10e7 100644
--- a/board/esd/cpci750/ide.c
+++ b/board/esd/cpci750/ide.c
@@ -30,7 +30,6 @@
#include <ide.h>
#include <pci.h>
-extern ulong ide_bus_offset[CONFIG_SYS_IDE_MAXBUS];
int cpci_hd_type;
int ata_device(int dev)
diff --git a/board/linkstation/ide.c b/board/linkstation/ide.c
index f3e3fce..541c958 100644
--- a/board/linkstation/ide.c
+++ b/board/linkstation/ide.c
@@ -37,7 +37,6 @@
#define IT8212_PCI_IdeBusSkewCONTROL 0x4c
#define IT8212_PCI_IdeDrivingCURRENT 0x42
-extern ulong ide_bus_offset[CONFIG_SYS_IDE_MAXBUS];
extern struct pci_controller hose;
int ide_preinit (void)
diff --git a/board/pcs440ep/pcs440ep.c b/board/pcs440ep/pcs440ep.c
index 746a54c..52da053 100644
--- a/board/pcs440ep/pcs440ep.c
+++ b/board/pcs440ep/pcs440ep.c
@@ -672,7 +672,6 @@ U_BOOT_CMD(
* ( bus per_addr 20 -30 is connectsd on CF bus A10-A0)
* These values are shifted
*/
-extern ulong *ide_bus_offset;
void inline ide_outb(int dev, int port, unsigned char val)
{
debug ("ide_outb (dev= %d, port= 0x%x, val= 0x%02x) : @ 0x%08lx\n",
diff --git a/common/cmd_ide.c b/common/cmd_ide.c
index 6b4813e..b9feb80 100644
--- a/common/cmd_ide.c
+++ b/common/cmd_ide.c
@@ -109,8 +109,6 @@ static uchar ide_wait (int dev, ulong t);
#define IDE_SPIN_UP_TIME_OUT 5000 /* 5 sec spin-up timeout */
-static void input_data(int dev, ulong *sect_buf, int words);
-static void output_data(int dev, const ulong *sect_buf, int words);
static void ident_cpy (unsigned char *dest, unsigned char *src, unsigned int len);
#ifndef CONFIG_SYS_ATA_PORT_ADDR
@@ -483,12 +481,24 @@ block_dev_desc_t *ide_get_dev(int dev)
/* ------------------------------------------------------------------------- */
+void ide_input_swap_data(int dev, ulong *sect_buf, int words)
+ __attribute__ ((weak, alias("__ide_input_swap_data")));
+
+void ide_input_data(int dev, ulong *sect_buf, int words)
+ __attribute__ ((weak, alias("__ide_input_data")));
+
+void ide_output_data(int dev, const ulong *sect_buf, int words)
+ __attribute__ ((weak, alias("__ide_output_data")));
+
/* We only need to swap data if we are running on a big endian cpu. */
/* But Au1x00 cpu:s already swaps data in big endian mode! */
#if defined(__LITTLE_ENDIAN) || defined(CONFIG_SOC_AU1X00)
-#define input_swap_data(x,y,z) input_data(x,y,z)
+void __ide_input_swap_data(int dev, ulong *sect_buf, int words)
+{
+ ide_input_data(dev, sect_buf, words);
+}
#else
-static void input_swap_data(int dev, ulong *sect_buf, int words)
+void __ide_input_swap_data(int dev, ulong *sect_buf, int words)
{
#if defined(CONFIG_CPC45)
uchar i;
@@ -531,7 +541,7 @@ static void input_swap_data(int dev, ulong *sect_buf, int words)
#if defined(CONFIG_IDE_SWAP_IO)
-static void output_data(int dev, const ulong *sect_buf, int words)
+void __ide_output_data(int dev, const ulong *sect_buf, int words)
{
#if defined(CONFIG_CPC45)
uchar *dbuf;
@@ -574,7 +584,7 @@ static void output_data(int dev, const ulong *sect_buf, int words)
#endif
}
#else /* ! CONFIG_IDE_SWAP_IO */
-static void output_data(int dev, const ulong *sect_buf, int words)
+void __ide_output_data(int dev, const ulong *sect_buf, int words)
{
#if defined(CONFIG_IDE_AHB)
ide_write_data(dev, sect_buf, words);
@@ -585,7 +595,7 @@ static void output_data(int dev, const ulong *sect_buf, int words)
#endif /* CONFIG_IDE_SWAP_IO */
#if defined(CONFIG_IDE_SWAP_IO)
-static void input_data(int dev, ulong *sect_buf, int words)
+void __ide_input_data(int dev, ulong *sect_buf, int words)
{
#if defined(CONFIG_CPC45)
uchar *dbuf;
@@ -634,7 +644,7 @@ static void input_data(int dev, ulong *sect_buf, int words)
#endif
}
#else /* ! CONFIG_IDE_SWAP_IO */
-static void input_data(int dev, ulong *sect_buf, int words)
+void __ide_input_data(int dev, ulong *sect_buf, int words)
{
#if defined(CONFIG_IDE_AHB)
ide_read_data(dev, sect_buf, words);
@@ -744,7 +754,7 @@ static void ide_ident(block_dev_desc_t *dev_desc)
return;
#endif
- input_swap_data(device, (ulong *)&iop, ATA_SECTORWORDS);
+ ide_input_swap_data(device, (ulong *)&iop, ATA_SECTORWORDS);
ident_cpy((unsigned char *) dev_desc->revision, iop.fw_rev,
sizeof(dev_desc->revision));
@@ -1006,7 +1016,7 @@ ulong ide_read(int device, lbaint_t blknr, ulong blkcnt, void *buffer)
break;
}
- input_data(device, buffer, ATA_SECTORWORDS);
+ ide_input_data(device, buffer, ATA_SECTORWORDS);
(void) ide_inb(device, ATA_STATUS); /* clear IRQ */
++n;
@@ -1099,7 +1109,7 @@ ulong ide_write(int device, lbaint_t blknr, ulong blkcnt, const void *buffer)
goto WR_OUT;
}
- output_data(device, buffer, ATA_SECTORWORDS);
+ ide_output_data(device, buffer, ATA_SECTORWORDS);
c = ide_inb(device, ATA_STATUS); /* clear IRQ */
++n;
++blknr;
@@ -1232,10 +1242,17 @@ int ide_device_present(int dev)
* ATAPI Support
*/
+void ide_input_data_shorts(int dev, ushort *sect_buf, int shorts)
+ __attribute__ ((weak, alias("__ide_input_data_shorts")));
+
+void ide_output_data_shorts(int dev, ushort *sect_buf, int shorts)
+ __attribute__ ((weak, alias("__ide_output_data_shorts")));
+
+
#if defined(CONFIG_IDE_SWAP_IO)
/* since ATAPI may use commands with not 4 bytes alligned length
* we have our own transfer functions, 2 bytes alligned */
-static void output_data_shorts(int dev, ushort *sect_buf, int shorts)
+void __ide_output_data_shorts(int dev, ushort *sect_buf, int shorts)
{
#if defined(CONFIG_CPC45)
uchar *dbuf;
@@ -1267,7 +1284,7 @@ static void output_data_shorts(int dev, ushort *sect_buf, int shorts)
#endif
}
-static void input_data_shorts(int dev, ushort *sect_buf, int shorts)
+void __ide_input_data_shorts(int dev, ushort *sect_buf, int shorts)
{
#if defined(CONFIG_CPC45)
uchar *dbuf;
@@ -1300,12 +1317,12 @@ static void input_data_shorts(int dev, ushort *sect_buf, int shorts)
}
#else /* ! CONFIG_IDE_SWAP_IO */
-static void output_data_shorts(int dev, ushort *sect_buf, int shorts)
+void __ide_output_data_shorts(int dev, ushort *sect_buf, int shorts)
{
outsw(ATA_CURR_BASE(dev) + ATA_DATA_REG, sect_buf, shorts);
}
-static void input_data_shorts(int dev, ushort *sect_buf, int shorts)
+void __ide_input_data_shorts(int dev, ushort *sect_buf, int shorts)
{
insw(ATA_CURR_BASE(dev) + ATA_DATA_REG, sect_buf, shorts);
}
@@ -1384,7 +1401,7 @@ unsigned char atapi_issue(int device, unsigned char *ccb, int ccblen,
}
/* write command block */
- output_data_shorts(device, (unsigned short *) ccb, ccblen / 2);
+ ide_output_data_shorts(device, (unsigned short *) ccb, ccblen / 2);
/* ATAPI Command written wait for completition */
udelay(5000); /* device must set bsy */
@@ -1435,12 +1452,12 @@ unsigned char atapi_issue(int device, unsigned char *ccb, int ccblen,
/* ok now decide if it is an in or output */
if ((ide_inb(device, ATA_SECT_CNT) & 0x02) == 0) {
debug("Write to device\n");
- output_data_shorts(device, (unsigned short *) buffer,
- n);
+ ide_output_data_shorts(device,
+ (unsigned short *) buffer, n);
} else {
debug("Read from device @ %p shorts %d\n", buffer, n);
- input_data_shorts(device, (unsigned short *) buffer,
- n);
+ ide_input_data_shorts(device,
+ (unsigned short *) buffer, n);
}
}
udelay(5000); /* seems that some CD ROMs need this... */
diff --git a/include/ide.h b/include/ide.h
index f9f1951..44a86a7 100644
--- a/include/ide.h
+++ b/include/ide.h
@@ -27,6 +27,7 @@
#define IDE_BUS(dev) (dev / (CONFIG_SYS_IDE_MAXDEVICE / CONFIG_SYS_IDE_MAXBUS))
#define ATA_CURR_BASE(dev) (CONFIG_SYS_ATA_BASE_ADDR+ide_bus_offset[IDE_BUS(dev)])
+extern ulong ide_bus_offset[];
#ifdef CONFIG_IDE_LED
@@ -72,4 +73,14 @@ void ide_write_register(int dev, unsigned int port, unsigned char val);
void ide_read_data(int dev, ulong *sect_buf, int words);
void ide_write_data(int dev, ulong *sect_buf, int words);
#endif
+
+/*
+ * I/O function overrides
+ */
+void ide_input_swap_data(int dev, ulong *sect_buf, int words);
+void ide_input_data(int dev, ulong *sect_buf, int words);
+void ide_output_data(int dev, const ulong *sect_buf, int words);
+void ide_input_data_shorts(int dev, ushort *sect_buf, int shorts);
+void ide_output_data_shorts(int dev, ushort *sect_buf, int shorts);
+
#endif /* _IDE_H */
--
1.7.12
More information about the U-Boot
mailing list