[U-Boot] [PATCH v5 3/7] env: Enable getenv_f() for SPL_BUILD

Stefan Roese sr at denx.de
Tue Oct 23 10:28:31 CEST 2012


With this patch, getenv_f() can be included easily into the SPL
binary. With this, SPL boards can now use getenv_f() to read
environment variables (e.g. to detect if the OS or U-Boot shall
be executed).

In the approach this is done for env stored in NOR flash, as this
will be used by an upcoming MPC5200 board port.

Signed-off-by: Stefan Roese <sr at denx.de>
---
Changes in v4:
- getenv_f not extracted into separate file. Only Makefile
  additions for SPL_BUILD needed.

Changes in v3:
- Rebased on current master plus SPL framework v7

 common/Makefile | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/common/Makefile b/common/Makefile
index eac6360..e76f2e1 100644
--- a/common/Makefile
+++ b/common/Makefile
@@ -199,6 +199,9 @@ COBJS-$(CONFIG_CMD_DFU) += cmd_dfu.o
 endif
 
 ifdef CONFIG_SPL_BUILD
+COBJS-y += cmd_nvedit.o
+COBJS-y += env_common.o
+COBJS-$(CONFIG_ENV_IS_IN_FLASH) += env_flash.o
 COBJS-$(CONFIG_SPL_YMODEM_SUPPORT) += xyzModem.o
 COBJS-$(CONFIG_SPL_NET_SUPPORT) += cmd_nvedit.o
 COBJS-$(CONFIG_SPL_NET_SUPPORT) += env_common.o
-- 
1.8.0



More information about the U-Boot mailing list