[U-Boot] [PATCH v5 4/7] mpc5200: Add SPL support
Stefan Roese
sr at denx.de
Tue Oct 23 10:28:32 CEST 2012
This patch adds SPL booting support (NOR flash) for the
MPC5200 platforms.
Signed-off-by: Stefan Roese <sr at denx.de>
---
Changes in v3:
- Don't use special MPC5xxx memcpy in SPL
- Move linker symbols to header spl.h (checkpatch)
Changes in v2:
- Rebased on Tom's SPL framework patches v4
arch/powerpc/cpu/mpc5xxx/Makefile | 4 ++
arch/powerpc/cpu/mpc5xxx/spl_boot.c | 79 +++++++++++++++++++++++++++++++++
arch/powerpc/cpu/mpc5xxx/start.S | 22 +++++++++
arch/powerpc/cpu/mpc5xxx/u-boot-spl.lds | 57 ++++++++++++++++++++++++
arch/powerpc/include/asm/spl.h | 31 +++++++++++++
arch/powerpc/lib/Makefile | 10 +++++
6 files changed, 203 insertions(+)
create mode 100644 arch/powerpc/cpu/mpc5xxx/spl_boot.c
create mode 100644 arch/powerpc/cpu/mpc5xxx/u-boot-spl.lds
create mode 100644 arch/powerpc/include/asm/spl.h
diff --git a/arch/powerpc/cpu/mpc5xxx/Makefile b/arch/powerpc/cpu/mpc5xxx/Makefile
index 1a088b7..8de2c13 100644
--- a/arch/powerpc/cpu/mpc5xxx/Makefile
+++ b/arch/powerpc/cpu/mpc5xxx/Makefile
@@ -41,6 +41,10 @@ COBJS-y += speed.o
COBJS-$(CONFIG_CMD_USB) += usb_ohci.o
COBJS-$(CONFIG_CMD_USB) += usb.o
+ifdef CONFIG_SPL_BUILD
+COBJS-y += spl_boot.o
+endif
+
SRCS := $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS-y:.o=.c)
OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS-y))
START := $(addprefix $(obj),$(SSTART) $(CSTART))
diff --git a/arch/powerpc/cpu/mpc5xxx/spl_boot.c b/arch/powerpc/cpu/mpc5xxx/spl_boot.c
new file mode 100644
index 0000000..9f14127
--- /dev/null
+++ b/arch/powerpc/cpu/mpc5xxx/spl_boot.c
@@ -0,0 +1,79 @@
+/*
+ * Copyright (C) 2012 Stefan Roese <sr at denx.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <common.h>
+#include <spl.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+/*
+ * Needed to align size SPL image to a 4-byte length
+ */
+u32 end_align __attribute__ ((section(".end_align")));
+
+/*
+ * Return selected boot device. On MPC5200 its only NOR flash right now.
+ */
+u32 spl_boot_device(void)
+{
+ return BOOT_DEVICE_NOR;
+}
+
+/*
+ * SPL version of board_init_f()
+ */
+void board_init_f(ulong bootflag)
+{
+ end_align = (u32)__spl_flash_end;
+
+ /*
+ * First we need to initialize the SDRAM, so that the real
+ * U-Boot or the OS (Linux) can be loaded
+ */
+ initdram(0);
+
+ /* Clear bss */
+ memset(__bss_start, '\0', __bss_end__ - __bss_start);
+
+ /*
+ * Init global_data pointer. Has to be done before calling
+ * get_clocks(), as it stores some clock values into gd needed
+ * later on in the serial driver.
+ */
+ /* Pointer is writable since we allocated a register for it */
+ gd = (gd_t *)(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_GBL_DATA_OFFSET);
+ /* Clear initial global data */
+ memset((void *)gd, 0, sizeof(gd_t));
+
+ /*
+ * get_clocks() needs to be called so that the serial driver
+ * works correctly
+ */
+ get_clocks();
+
+ /*
+ * Do rudimental console / serial setup
+ */
+ preloader_console_init();
+
+ /*
+ * Call board_init_r() (SPL framework version) to load and boot
+ * real U-Boot or OS
+ */
+ board_init_r(NULL, 0);
+ /* Does not return!!! */
+}
diff --git a/arch/powerpc/cpu/mpc5xxx/start.S b/arch/powerpc/cpu/mpc5xxx/start.S
index 51cc4e2..ad5bc0a 100644
--- a/arch/powerpc/cpu/mpc5xxx/start.S
+++ b/arch/powerpc/cpu/mpc5xxx/start.S
@@ -50,6 +50,7 @@
#define MSR_KERNEL (MSR_FP|MSR_ME|MSR_RI)
#endif
+#ifndef CONFIG_SPL_BUILD
/*
* Set up GOT: Global Offset Table
*
@@ -68,6 +69,7 @@
GOT_ENTRY(__bss_end__)
GOT_ENTRY(__bss_start)
END_GOT
+#endif
/*
* Version string
@@ -84,6 +86,18 @@ version_string:
. = EXC_OFF_SYS_RESET
.globl _start
_start:
+
+#if defined(CONFIG_SPL) && !defined(CONFIG_SPL_BUILD)
+ /*
+ * This is the entry of the real U-Boot from a board port
+ * that supports SPL booting on the MPC5200. We only need
+ * to call board_init_f() here. Everything else has already
+ * been done in the SPL u-boot version.
+ */
+ GET_GOT /* initialize GOT access */
+ bl board_init_f /* run 1st part of board init code (in Flash)*/
+ /* NOTREACHED - board_init_f() does not return */
+#else
mfmsr r5 /* save msr contents */
/* Move CSBoot and adjust instruction pointer */
@@ -152,7 +166,9 @@ lowboot_reentry:
/* Be careful to keep code relocatable ! */
/*--------------------------------------------------------------*/
+#ifndef CONFIG_SPL_BUILD
GET_GOT /* initialize GOT access */
+#endif
/* r3: IMMR */
bl cpu_init_f /* run low-level CPU init code (in Flash)*/
@@ -160,7 +176,9 @@ lowboot_reentry:
bl board_init_f /* run 1st part of board init code (in Flash)*/
/* NOTREACHED - board_init_f() does not return */
+#endif
+#ifndef CONFIG_SPL_BUILD
/*
* Vector Table
*/
@@ -333,6 +351,7 @@ int_return:
lwz r1,GPR1(r1)
SYNC
rfi
+#endif /* CONFIG_SPL_BUILD */
/*
* This code initialises the MPC5xxx processor core
@@ -522,6 +541,7 @@ get_pvr:
mfspr r3, PVR
blr
+#ifndef CONFIG_SPL_BUILD
/*------------------------------------------------------------------------------*/
/*
@@ -759,3 +779,5 @@ trap_init:
mtlr r4 /* restore link register */
blr
+
+#endif /* CONFIG_SPL_BUILD */
diff --git a/arch/powerpc/cpu/mpc5xxx/u-boot-spl.lds b/arch/powerpc/cpu/mpc5xxx/u-boot-spl.lds
new file mode 100644
index 0000000..cab9b92
--- /dev/null
+++ b/arch/powerpc/cpu/mpc5xxx/u-boot-spl.lds
@@ -0,0 +1,57 @@
+/*
+ * Copyright 2012 Stefan Roese <sr at denx.de>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+MEMORY
+{
+ sdram : ORIGIN = CONFIG_SPL_BSS_START_ADDR,
+ LENGTH = CONFIG_SPL_BSS_MAX_SIZE
+ flash : ORIGIN = CONFIG_SPL_TEXT_BASE,
+ LENGTH = CONFIG_SYS_SPL_MAX_LEN
+}
+
+OUTPUT_ARCH(powerpc)
+ENTRY(_start)
+SECTIONS
+{
+ .text :
+ {
+ __start = .;
+ arch/powerpc/cpu/mpc5xxx/start.o (.text)
+ *(.text*)
+ } > flash
+
+ . = ALIGN(4);
+ .data : { *(SORT_BY_ALIGNMENT(.data*)) } > flash
+
+ . = ALIGN(4);
+ .rodata : { *(SORT_BY_ALIGNMENT(.rodata*)) } > flash
+
+ . = ALIGN(4);
+ .end_align : { *(.end_align*) } > flash
+ __spl_flash_end = .;
+
+ .bss :
+ {
+ . = ALIGN(4);
+ __bss_start = .;
+ *(.bss*)
+ . = ALIGN(4);
+ __bss_end__ = .;
+ } > sdram
+}
diff --git a/arch/powerpc/include/asm/spl.h b/arch/powerpc/include/asm/spl.h
new file mode 100644
index 0000000..f43bc23
--- /dev/null
+++ b/arch/powerpc/include/asm/spl.h
@@ -0,0 +1,31 @@
+/*
+ * (C) Copyright 2012
+ * Texas Instruments, <www.ti.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#ifndef _ASM_SPL_H_
+#define _ASM_SPL_H_
+
+#define BOOT_DEVICE_NOR 1
+
+/* Linker symbols */
+extern char __bss_start[], __bss_end__[];
+
+#endif
diff --git a/arch/powerpc/lib/Makefile b/arch/powerpc/lib/Makefile
index 1beecf6..fa62835 100644
--- a/arch/powerpc/lib/Makefile
+++ b/arch/powerpc/lib/Makefile
@@ -44,7 +44,9 @@ SOBJS-y += ticks.o
SOBJS-y += reloc.o
COBJS-$(CONFIG_BAT_RW) += bat_rw.o
+ifndef CONFIG_SPL_BUILD
COBJS-y += board.o
+endif
COBJS-y += bootm.o
COBJS-y += cache.o
COBJS-y += extable.o
@@ -53,6 +55,11 @@ COBJS-$(CONFIG_CMD_KGDB) += kgdb.o
COBJS-${CONFIG_CMD_IDE} += ide.o
COBJS-y += time.o
+# Don't include the MPC5xxx special memcpy into the
+# SPL U-Boot image. memcpy is used in the SPL NOR
+# flash driver. And we need the real, fast memcpy
+# here. We have no problems with unaligned access.
+ifndef CONFIG_SPL_BUILD
# Workaround for local bus unaligned access problems
# on MPC512x and MPC5200
ifdef CONFIG_MPC512X
@@ -63,6 +70,7 @@ ifdef CONFIG_MPC5200
$(obj)ppcstring.o: AFLAGS += -Dmemcpy=__memcpy
COBJS-y += memcpy_mpc5200.o
endif
+endif
ifdef CONFIG_SPL_BUILD
COBJS-$(CONFIG_SPL_FRAMEWORK) += spl.o
@@ -79,12 +87,14 @@ TARGETS += $(LIB)
all: $(TARGETS)
$(LIB): $(obj).depend $(OBJS)
+ifndef CONFIG_SPL_BUILD
@if ! $(CROSS_COMPILE)readelf -S $(OBJS) | grep -q '\.fixup.*PROGBITS';\
then \
echo "ERROR: Your compiler doesn't generate .fixup sections!";\
echo " Upgrade to a recent toolchain."; \
exit 1; \
fi;
+endif
$(call cmd_link_o_target, $(OBJS))
$(LIBGCC): $(obj).depend $(LGOBJS)
--
1.8.0
More information about the U-Boot
mailing list