[U-Boot] [PATCH V2] M68K: eb_cpu5282: general update and enhanced board support
Jens Scharsig (BuS Elektronik)
esw at bus-elektronik.de
Tue Oct 30 11:46:05 CET 2012
From: "Jens Scharsig (BuS Elektronik)" <esw at bus-elektronik.de>
- update clock settings for higher perfomance
- change standard baud rate to 115200
- fix flash base address
- remove unused defines
- add I2C support
- switch form board dependent flash to cfi
- remove board dependent flash code
- use sdram bank 0 instead of bank 1 on boot
- enable on board frame buffer instead external
- remove fake mac address form config
- add watchdog support
- add status led support
Signed-off-by: Jens Scharsig (BuS Elektronik) <esw at bus-elektronik.de>
---
changes since V1:
remove autodetect video, don't work on all hardware revisions
board/BuS/eb_cpu5282/Makefile | 2 +-
board/BuS/eb_cpu5282/cfm_flash.c | 212 -------------------
board/BuS/eb_cpu5282/cfm_flash.h | 40 ----
board/BuS/eb_cpu5282/config.mk | 27 ---
board/BuS/eb_cpu5282/eb_cpu5282.c | 110 +++++++---
board/BuS/eb_cpu5282/flash.c | 415 -------------------------------------
boards.cfg | 2 +-
include/configs/eb_cpu5282.h | 102 +++++----
8 files changed, 146 insertions(+), 764 deletions(-)
delete mode 100644 board/BuS/eb_cpu5282/cfm_flash.c
delete mode 100644 board/BuS/eb_cpu5282/cfm_flash.h
delete mode 100644 board/BuS/eb_cpu5282/config.mk
delete mode 100644 board/BuS/eb_cpu5282/flash.c
diff --git a/board/BuS/eb_cpu5282/Makefile b/board/BuS/eb_cpu5282/Makefile
index 0f14699..ac860c1 100644
--- a/board/BuS/eb_cpu5282/Makefile
+++ b/board/BuS/eb_cpu5282/Makefile
@@ -25,7 +25,7 @@ include $(TOPDIR)/config.mk
LIB = $(obj)lib$(BOARD).o
-COBJS = $(BOARD).o cfm_flash.o flash.o
+COBJS = $(BOARD).o
SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
OBJS := $(addprefix $(obj),$(COBJS))
diff --git a/board/BuS/eb_cpu5282/cfm_flash.c b/board/BuS/eb_cpu5282/cfm_flash.c
deleted file mode 100644
index fe03b17..0000000
--- a/board/BuS/eb_cpu5282/cfm_flash.c
+++ /dev/null
@@ -1,212 +0,0 @@
-/*
- * Basic Flash Driver for Freescale MCF 5281/5282 internal FLASH
- *
- * (C) Copyright 2005 BuS Elektronik GmbH & Co.KG <esw at bus-elektonik.de>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <asm/m5282.h>
-#include "cfm_flash.h"
-
-#if defined(CONFIG_M5281) || defined(CONFIG_M5282)
-
-#if (CONFIG_SYS_CLK>20000000)
- #define CFM_CLK (((long) CONFIG_SYS_CLK / (400000 * 8) + 1) | 0x40)
-#else
- #define CFM_CLK ((long) CONFIG_SYS_CLK / 400000 + 1)
-#endif
-
-#define cmf_backdoor_address(addr) (((addr) & 0x0007FFFF) | 0x04000000 | \
- (CONFIG_SYS_MBAR & 0xC0000000))
-
-void cfm_flash_print_info (flash_info_t * info)
-{
- printf ("Freescale: ");
- switch (info->flash_id & FLASH_TYPEMASK) {
- case FREESCALE_ID_MCF5281 & FLASH_TYPEMASK:
- printf ("MCF5281 internal FLASH\n");
- break;
- case FREESCALE_ID_MCF5282 & FLASH_TYPEMASK:
- printf ("MCF5282 internal FLASH\n");
- break;
- default:
- printf ("Unknown Chip Type\n");
- break;
- }
-}
-
-void cfm_flash_init (flash_info_t * info)
-{
- int sector;
- ulong protection;
- MCFCFM_MCR = 0;
- MCFCFM_CLKD = CFM_CLK;
- debug ("CFM Clock divider: %ld (%d Hz @ %ld Hz)\n",CFM_CLK,\
- CONFIG_SYS_CLK / (2* ((CFM_CLK & 0x3F)+1) * (1+((CFM_CLK & 0x40)>>6)*7)),\
- CONFIG_SYS_CLK);
- MCFCFM_SACC = 0;
- MCFCFM_DACC = 0;
-
- if (MCFCFM_SEC & MCFCFM_SEC_KEYEN)
- puts("CFM backdoor access is enabled\n");
- if (MCFCFM_SEC & MCFCFM_SEC_SECSTAT)
- puts("CFM securety is enabled\n");
-
- #ifdef CONFIG_M5281
- info->flash_id = (FREESCALE_MANUFACT & FLASH_VENDMASK) |
- (FREESCALE_ID_MCF5281 & FLASH_TYPEMASK);
- info->size = 256*1024;
- info->sector_count = 16;
- #else
- info->flash_id = (FREESCALE_MANUFACT & FLASH_VENDMASK) |
- (FREESCALE_ID_MCF5282 & FLASH_TYPEMASK);
- info->size = 512*1024;
- info->sector_count = 32;
- #endif
- protection = MCFCFM_PROT;
- for (sector = 0; sector < info->sector_count; sector++)
- {
- if (sector == 0)
- {
- info->start[sector] = CONFIG_SYS_INT_FLASH_BASE;
- }
- else
- {
- info->start[sector] = info->start[sector-1] + 0x04000;
- }
- info->protect[sector] = protection & 1;
- protection >>= 1;
- }
-}
-
-int cfm_flash_readycheck(int checkblank)
-{
- int rc;
- unsigned char state;
-
- rc = ERR_OK;
- while (!(MCFCFM_USTAT & MCFCFM_USTAT_CCIF));
- state = MCFCFM_USTAT;
- if (state & MCFCFM_USTAT_ACCERR)
- {
- debug ("%s(): CFM access error",__FUNCTION__);
- rc = ERR_PROG_ERROR;
- }
- if (state & MCFCFM_USTAT_PVIOL)
- {
- debug ("%s(): CFM protection violation",__FUNCTION__);
- rc = ERR_PROTECTED;
- }
- if (checkblank)
- {
- if (!(state & MCFCFM_USTAT_BLANK))
- {
- debug ("%s(): CFM erras error",__FUNCTION__);
- rc = ERR_NOT_ERASED;
- }
- }
- MCFCFM_USTAT = state & 0x34; /* reset state */
- return rc;
-}
-
-/* Erase 16KiB = 8 2KiB pages */
-
-int cfm_flash_erase_sector (flash_info_t * info, int sector)
-{
- ulong address;
- int page;
- int rc;
- rc= ERR_OK;
- address = cmf_backdoor_address(info->start[sector]);
- for (page=0; (page<8) && (rc==ERR_OK); page++)
- {
- *(volatile __u32*) address = 0;
- MCFCFM_CMD = MCFCFM_CMD_PGERS;
- MCFCFM_USTAT = MCFCFM_USTAT_CBEIF;
- rc = cfm_flash_readycheck(0);
- if (rc==ERR_OK)
- {
- *(volatile __u32*) address = 0;
- MCFCFM_CMD = MCFCFM_CMD_PGERSVER;
- MCFCFM_USTAT = MCFCFM_USTAT_CBEIF;
- rc = cfm_flash_readycheck(1);
- }
- address += 0x800;
- }
- return rc;
-}
-
-int cfm_flash_write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt)
-{
- int rc;
- ulong dest, data;
-
- rc = ERR_OK;
- if (addr & 3)
- {
- debug ("Byte and Word alignment not supported\n");
- rc = ERR_ALIGN;
- }
- if (cnt & 3)
- {
- debug ("Byte and Word transfer not supported\n");
- rc = ERR_ALIGN;
- }
- dest = cmf_backdoor_address(addr);
- while ((cnt>=4) && (rc == ERR_OK))
- {
- data = *((volatile u32 *) src);
- *(volatile u32*) dest = data;
- MCFCFM_CMD = MCFCFM_CMD_PGM;
- MCFCFM_USTAT = MCFCFM_USTAT_CBEIF;
- rc = cfm_flash_readycheck(0);
- if (*(volatile u32*) addr != data) rc = ERR_PROG_ERROR;
- src +=4;
- dest +=4;
- addr +=4;
- cnt -=4;
- }
- return rc;
-}
-
-#ifdef CONFIG_SYS_FLASH_PROTECTION
-
-int cfm_flash_protect(flash_info_t * info,long sector,int prot)
-{
- int rc;
-
- rc= ERR_OK;
- if (prot)
- {
- MCFCFM_PROT |= (1<<sector);
- info->protect[sector]=1;
- }
- else
- {
- MCFCFM_PROT &= ~(1<<sector);
- info->protect[sector]=0;
- }
- return rc;
-}
-
-#endif
-
-#endif
diff --git a/board/BuS/eb_cpu5282/cfm_flash.h b/board/BuS/eb_cpu5282/cfm_flash.h
deleted file mode 100644
index ed4e794..0000000
--- a/board/BuS/eb_cpu5282/cfm_flash.h
+++ /dev/null
@@ -1,40 +0,0 @@
-/*
- * Basic Flash Driver for Freescale MCF 5282 internal FLASH
- *
- * (C) Copyright 2005 BuS Elektronik GmbH & Co.KG <esw at bus-elektonik.de>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef __CFM_FLASH_H_
-#define __CFM_FLASH_H_
-
-#define FREESCALE_MANUFACT 0xFACFFACF
-#define FREESCALE_ID_MCF5281 0x5281
-#define FREESCALE_ID_MCF5282 0x5282
-
-extern void cfm_flash_print_info (flash_info_t * info);
-extern int cfm_flash_erase_sector (flash_info_t * info, int sector);
-extern void cfm_flash_init (flash_info_t * info);
-extern int cfm_flash_write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt);
-#ifdef CONFIG_SYS_FLASH_PROTECTION
-extern int cfm_flash_protect(flash_info_t * info,long sector,int prot);
-#endif
-
-#endif
diff --git a/board/BuS/eb_cpu5282/config.mk b/board/BuS/eb_cpu5282/config.mk
deleted file mode 100644
index 18fb84e..0000000
--- a/board/BuS/eb_cpu5282/config.mk
+++ /dev/null
@@ -1,27 +0,0 @@
-#
-# (C) Copyright 2000-2003
-# Wolfgang Denk, DENX Software Engineering, wd at denx.de.
-# Coldfire contribution by Bernhard Kuhn <bkuhn at metrowerks.com>
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-ifndef CONFIG_SYS_TEXT_BASE
-CONFIG_SYS_TEXT_BASE = 0xFE000000
-endif
diff --git a/board/BuS/eb_cpu5282/eb_cpu5282.c b/board/BuS/eb_cpu5282/eb_cpu5282.c
index d64ad1b..fd71ab9 100644
--- a/board/BuS/eb_cpu5282/eb_cpu5282.c
+++ b/board/BuS/eb_cpu5282/eb_cpu5282.c
@@ -35,18 +35,19 @@
DECLARE_GLOBAL_DATA_PTR;
+#ifdef CONFIG_VIDEO
unsigned long display_width;
unsigned long display_height;
+#endif
/*---------------------------------------------------------------------------*/
int checkboard (void)
{
- puts ("Board: MCF-EV1 + MCF-EV23 (BuS Elektronik GmbH & Co. KG)\n");
+ puts("Board: EB+CPU5282 (BuS Elektronik GmbH & Co. KG)\n");
#if (CONFIG_SYS_TEXT_BASE == CONFIG_SYS_INT_FLASH_BASE)
- puts (" Boot from Internal FLASH\n");
+ puts(" Boot from Internal FLASH\n");
#endif
-
return 0;
}
@@ -55,29 +56,39 @@ phys_size_t initdram (int board_type)
int size, i;
size = 0;
- MCFSDRAMC_DCR = MCFSDRAMC_DCR_RTIM_6
- | MCFSDRAMC_DCR_RC ((15 * CONFIG_SYS_CLK) >> 4);
+ MCFSDRAMC_DCR = MCFSDRAMC_DCR_RTIM_6 |
+ MCFSDRAMC_DCR_RC((15 * CONFIG_SYS_CLK / 1000000) >> 4);
+ asm (" nop");
#ifdef CONFIG_SYS_SDRAM_BASE0
-
- MCFSDRAMC_DACR0 = MCFSDRAMC_DACR_BASE (CONFIG_SYS_SDRAM_BASE0)
- | MCFSDRAMC_DACR_CASL (1)
- | MCFSDRAMC_DACR_CBM (3)
- | MCFSDRAMC_DACR_PS_16;
+ MCFSDRAMC_DACR0 = MCFSDRAMC_DACR_BASE(CONFIG_SYS_SDRAM_BASE0)|
+ MCFSDRAMC_DACR_CASL(1) | MCFSDRAMC_DACR_CBM(3) |
+ MCFSDRAMC_DACR_PS_32;
+ asm (" nop");
MCFSDRAMC_DMR0 = MCFSDRAMC_DMR_BAM_16M | MCFSDRAMC_DMR_V;
+ asm (" nop");
MCFSDRAMC_DACR0 |= MCFSDRAMC_DACR_IP;
+ asm (" nop");
+ for (i = 0; i < 10; i++)
+ asm (" nop");
- *(unsigned short *) (CONFIG_SYS_SDRAM_BASE0) = 0xA5A5;
+ *(unsigned long *)(CONFIG_SYS_SDRAM_BASE0) = 0xA5A5A5A5;
+ asm (" nop");
MCFSDRAMC_DACR0 |= MCFSDRAMC_DACR_RE;
+ asm (" nop");
+
for (i = 0; i < 2000; i++)
asm (" nop");
- mbar_writeLong (MCFSDRAMC_DACR0,
- mbar_readLong (MCFSDRAMC_DACR0) | MCFSDRAMC_DACR_IMRS);
- *(unsigned int *) (CONFIG_SYS_SDRAM_BASE0 + 0x220) = 0xA5A5;
- size += CONFIG_SYS_SDRAM_SIZE * 1024 * 1024;
+
+ MCFSDRAMC_DACR0 |= MCFSDRAMC_DACR_IMRS;
+ asm (" nop");
+ /* write SDRAM mode register */
+ *(unsigned long *)(CONFIG_SYS_SDRAM_BASE0 + 0x80440) = 0xA5A5A5A5;
+ asm (" nop");
+ size += CONFIG_SYS_SDRAM_SIZE0 * 1024 * 1024;
#endif
-#ifdef CONFIG_SYS_SDRAM_BASE1
+#ifdef CONFIG_SYS_SDRAM_BASE1xx
MCFSDRAMC_DACR1 = MCFSDRAMC_DACR_BASE (CONFIG_SYS_SDRAM_BASE1)
| MCFSDRAMC_DACR_CASL (1)
| MCFSDRAMC_DACR_CBM (3)
@@ -139,33 +150,69 @@ int misc_init_r(void)
#ifdef CONFIG_HW_WATCHDOG
hw_watchdog_init();
#endif
-#ifndef CONFIG_VIDEO
- vcxk_init(16, 16);
-#endif
return 1;
}
-#if defined(CONFIG_VIDEO)
+#if defined(CONFIG_HW_WATCHDOG)
-/*
- ****h* EB+CPU5282-T1/drv_video_init
- * FUNCTION
- ***
- */
+void hw_watchdog_init(void)
+{
+ char *s;
+ int enable;
+
+ enable = 1;
+ s = getenv("watchdog");
+ if (s != NULL)
+ if ((strncmp(s, "off", 3) == 0) || (strncmp(s, "0", 1) == 0))
+ enable = 0;
+ if (enable)
+ MCFGPTA_GPTDDR |= (1<<2);
+ else
+ MCFGPTA_GPTDDR &= ~(1<<2);
+}
+
+void hw_watchdog_reset(void)
+{
+ MCFGPTA_GPTPORT ^= (1<<2);
+}
+#endif
+
+void __led_toggle(led_id_t mask)
+{
+ MCFGPTA_GPTPORT ^= (1 << 3);
+}
+
+void __led_init(led_id_t mask, int state)
+{
+ __led_set(mask, state);
+ MCFGPTA_GPTDDR |= (1 << 3) ;
+}
+
+void __led_set(led_id_t mask, int state)
+{
+ if (state == STATUS_LED_ON)
+ MCFGPTA_GPTPORT |= (1 << 3);
+ else
+ MCFGPTA_GPTPORT &= ~(1 << 3);
+}
+
+#if defined(CONFIG_VIDEO)
int drv_video_init(void)
{
char *s;
+#ifdef CONFIG_SPLASH_SCREEN
unsigned long splash;
-
+#endif
printf("Init Video as ");
-
- if ((s = getenv("displaywidth")) != NULL)
+ s = getenv("displaywidth");
+ if (s != NULL)
display_width = simple_strtoul(s, NULL, 10);
else
display_width = 256;
- if ((s = getenv("displayheight")) != NULL)
+ s = getenv("displayheight");
+ if (s != NULL)
display_height = simple_strtoul(s, NULL, 10);
else
display_height = 256;
@@ -178,10 +225,9 @@ int drv_video_init(void)
vcxk_init(display_width, display_height);
#ifdef CONFIG_SPLASH_SCREEN
- if ((s = getenv("splashimage")) != NULL) {
- debug("use splashimage: %s\n", s);
+ s = getenv("splashimage");
+ if (s != NULL) {
splash = simple_strtoul(s, NULL, 16);
- debug("use splashimage: %x\n", splash);
vcxk_acknowledge_wait();
video_display_bitmap(splash, 0, 0);
}
diff --git a/board/BuS/eb_cpu5282/flash.c b/board/BuS/eb_cpu5282/flash.c
deleted file mode 100644
index 8b7f957..0000000
--- a/board/BuS/eb_cpu5282/flash.c
+++ /dev/null
@@ -1,415 +0,0 @@
-/*
- * (C) Copyright 2005
- * BuS Elektronik GmbH & Co.KG <esw at bus-elektonik.de>
- *
- * Based On
- * Wolfgang Denk, DENX Software Engineering, wd at denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include "cfm_flash.h"
-
-#define PHYS_FLASH_1 CONFIG_SYS_FLASH_BASE
-#define FLASH_BANK_SIZE 0x200000
-
-flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS];
-
-void flash_print_info (flash_info_t * info)
-{
- int i;
-
- switch (info->flash_id & FLASH_VENDMASK) {
- case (AMD_MANUFACT & FLASH_VENDMASK):
- printf ("AMD: ");
- switch (info->flash_id & FLASH_TYPEMASK) {
- case (AMD_ID_LV160B & FLASH_TYPEMASK):
- printf ("AM29LV160B (16Bit)\n");
- break;
- default:
- printf ("Unknown Chip Type\n");
- break;
- }
- break;
- case FREESCALE_MANUFACT & FLASH_VENDMASK:
- cfm_flash_print_info (info);
- break;
- default:
- printf ("Unknown Vendor ");
- break;
- }
-
- puts (" Size: ");
- if ((info->size >> 20) > 0)
- {
- printf ("%ld MiB",info->size >> 20);
- }
- else
- {
- printf ("%ld KiB",info->size >> 10);
- }
- printf (" in %d Sectors\n", info->sector_count);
-
- printf (" Sector Start Addresses:");
- for (i = 0; i < info->sector_count; i++) {
- if ((i % 4) == 0) {
- printf ("\n ");
- }
- printf ("%02d: %08lX%s ", i,info->start[i],
- info->protect[i] ? " P" : " ");
- }
- printf ("\n\n");
-}
-
-unsigned long flash_init (void)
-{
- int i, j;
- ulong size = 0;
-
- for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; i++) {
- ulong flashbase = 0;
-
- switch (i)
- {
- case 1:
- flash_info[i].flash_id =
- (AMD_MANUFACT & FLASH_VENDMASK) |
- (AMD_ID_LV160B & FLASH_TYPEMASK);
- flash_info[i].size = FLASH_BANK_SIZE;
- flash_info[i].sector_count = CONFIG_SYS_MAX_FLASH_SECT;
- memset (flash_info[i].protect, 0, CONFIG_SYS_MAX_FLASH_SECT);
- flashbase = PHYS_FLASH_1;
- for (j = 0; j < flash_info[i].sector_count; j++) {
- if (j == 0) {
- /* 1st is 16 KiB */
- flash_info[i].start[j] = flashbase;
- }
- if ((j >= 1) && (j <= 2)) {
- /* 2nd and 3rd are 8 KiB */
- flash_info[i].start[j] =
- flashbase + 0x4000 + 0x2000 * (j - 1);
- }
- if (j == 3) {
- /* 4th is 32 KiB */
- flash_info[i].start[j] = flashbase + 0x8000;
- }
- if ((j >= 4) && (j <= 34)) {
- /* rest is 256 KiB */
- flash_info[i].start[j] =
- flashbase + 0x10000 + 0x10000 * (j - 4);
- }
- }
- break;
- case 0:
- cfm_flash_init (&flash_info[i]);
- break;
- default:
- panic ("configured to many flash banks!\n");
- }
-
- size += flash_info[i].size;
- }
-
- flash_protect (FLAG_PROTECT_SET,
- CONFIG_SYS_FLASH_BASE,
- CONFIG_SYS_FLASH_BASE + 0xffff, &flash_info[0]);
-
- return size;
-}
-
-#define CMD_READ_ARRAY 0x00F0
-#define CMD_UNLOCK1 0x00AA
-#define CMD_UNLOCK2 0x0055
-#define CMD_ERASE_SETUP 0x0080
-#define CMD_ERASE_CONFIRM 0x0030
-#define CMD_PROGRAM 0x00A0
-#define CMD_UNLOCK_BYPASS 0x0020
-
-#define MEM_FLASH_ADDR1 (*(volatile u16 *)(info->start[0] + (0x00000555<<1)))
-#define MEM_FLASH_ADDR2 (*(volatile u16 *)(info->start[0] + (0x000002AA<<1)))
-
-
-#define BIT_ERASE_DONE 0x0080
-#define BIT_RDY_MASK 0x0080
-#define BIT_PROGRAM_ERROR 0x0020
-#define BIT_TIMEOUT 0x80000000 /* our flag */
-
-#define ERR_READY -1
-
-int amd_flash_erase_sector(flash_info_t * info, int sector)
-{
- int state;
- ulong result;
- ulong start;
-
- volatile u16 *addr =
- (volatile u16 *) (info->start[sector]);
-
- MEM_FLASH_ADDR1 = CMD_UNLOCK1;
- MEM_FLASH_ADDR2 = CMD_UNLOCK2;
- MEM_FLASH_ADDR1 = CMD_ERASE_SETUP;
-
- MEM_FLASH_ADDR1 = CMD_UNLOCK1;
- MEM_FLASH_ADDR2 = CMD_UNLOCK2;
- *addr = CMD_ERASE_CONFIRM;
-
- /* wait until flash is ready */
- state = 0;
- start = get_timer(0);
-
- do {
- result = *addr;
-
- /* check timeout */
- if (get_timer(start) > CONFIG_SYS_FLASH_ERASE_TOUT) {
- MEM_FLASH_ADDR1 = CMD_READ_ARRAY;
- state = ERR_TIMOUT;
- }
-
- if (!state && (result & 0xFFFF) & BIT_ERASE_DONE)
- state = ERR_READY;
- }
- while (!state);
- if (state == ERR_READY)
- state = ERR_OK;
-
- MEM_FLASH_ADDR1 = CMD_READ_ARRAY;
-
- return state;
-}
-
-int flash_erase (flash_info_t * info, int s_first, int s_last)
-{
- int iflag, cflag;
- int sector;
- int rc;
-
- rc = ERR_OK;
-
- if (info->flash_id == FLASH_UNKNOWN)
- {
- rc = ERR_UNKNOWN_FLASH_TYPE;
- } /* (info->flash_id == FLASH_UNKNOWN) */
-
- if ((s_first < 0) || (s_first > s_last) || s_last >= info->sector_count)
- {
- rc = ERR_INVAL;
- }
-
- cflag = icache_status ();
- icache_disable ();
- iflag = disable_interrupts ();
-
- for (sector = s_first; (sector <= s_last) && (rc == ERR_OK); sector++) {
-
- if (info->protect[sector])
- {
- putc('P'); /* protected sector will not erase */
- }
- else
- {
- /* erase on unprotected sector */
- puts("E\b");
- switch (info->flash_id & FLASH_VENDMASK)
- {
- case (AMD_MANUFACT & FLASH_VENDMASK):
- rc = amd_flash_erase_sector(info,sector);
- break;
- case (FREESCALE_MANUFACT & FLASH_VENDMASK):
- rc = cfm_flash_erase_sector(info,sector);
- break;
- default:
- return ERR_UNKNOWN_FLASH_VENDOR;
- }
- putc('.');
- }
- }
- if (rc!=ERR_OK)
- {
- printf ("\n ");
- flash_perror (rc);
- }
- else
- {
- printf (" done\n");
- }
-
- udelay (10000); /* allow flash to settle - wait 10 ms */
-
- if (iflag)
- enable_interrupts ();
-
- if (cflag)
- icache_enable ();
-
- return rc;
-}
-
-volatile static int amd_write_word (flash_info_t * info, ulong dest, u16 data)
-{
- volatile u16 *addr;
- ulong result;
- int cflag, iflag;
- int state;
- ulong start;
-
- /*
- * Check if Flash is (sufficiently) erased
- */
- addr = (volatile u16 *) dest;
-
- result = *addr;
- if ((result & data) != data)
- return ERR_NOT_ERASED;
-
- /*
- * Disable interrupts which might cause a timeout
- * here. Remember that our exception vectors are
- * at address 0 in the flash, and we don't want a
- * (ticker) exception to happen while the flash
- * chip is in programming mode.
- */
-
- cflag = icache_status ();
- icache_disable ();
- iflag = disable_interrupts ();
-
- MEM_FLASH_ADDR1 = CMD_UNLOCK1;
- MEM_FLASH_ADDR2 = CMD_UNLOCK2;
- MEM_FLASH_ADDR1 = CMD_PROGRAM;
- *addr = data;
-
- /* arm simple, non interrupt dependent timer */
- start = get_timer(0);
-
- /* wait until flash is ready */
- state = 0;
- do {
- result = *addr;
-
- /* check timeout */
- if (get_timer(start) > CONFIG_SYS_FLASH_ERASE_TOUT) {
- state = ERR_TIMOUT;
- }
- if (!state && ((result & BIT_RDY_MASK) == (data & BIT_RDY_MASK)))
- state = ERR_READY;
-
- } while (!state);
-
- *addr = CMD_READ_ARRAY;
-
- if (state == ERR_READY)
- state = ERR_OK;
- if ((*addr != data) && (state != ERR_TIMOUT))
- state = ERR_PROG_ERROR;
-
- if (iflag)
- enable_interrupts ();
-
- if (cflag)
- icache_enable ();
-
- return state;
-}
-
-int amd_flash_write_buff(flash_info_t * info, uchar * src, ulong addr, ulong cnt)
-{
- int rc;
- ulong dest;
- u16 data;
-
- rc = ERR_OK;
- if (addr & 1)
- {
- debug ("Byte alignment not supported\n");
- rc = ERR_ALIGN;
- }
- if (cnt & 1)
- {
- debug ("Byte transfer not supported\n");
- rc = ERR_ALIGN;
- }
-
- dest = addr;
- while ((cnt>=2) && (rc == ERR_OK))
- {
- data = *((volatile u16 *) src);
- rc=amd_write_word (info,dest,data);
- src +=2;
- dest +=2;
- cnt -=2;
- }
- return rc;
-}
-
-int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt)
-{
- int rc;
-
- switch (info->flash_id & FLASH_VENDMASK)
- {
- case (AMD_MANUFACT & FLASH_VENDMASK):
- rc = amd_flash_write_buff(info,src,addr,cnt);
- break;
- case (FREESCALE_MANUFACT & FLASH_VENDMASK):
- rc = cfm_flash_write_buff(info,src,addr,cnt);
- break;
- default:
- rc = ERR_UNKNOWN_FLASH_VENDOR;
- }
- return rc;
-
-}
-int amd_flash_protect(flash_info_t * info,long sector,int prot)
-{
- int rc;
- rc= ERR_OK;
- if (prot)
- {
- info->protect[sector]=1;
- }
- else
- {
- info->protect[sector]=0;
- }
- return rc;
-}
-
-#ifdef CONFIG_SYS_FLASH_PROTECTION
-
-int flash_real_protect(flash_info_t * info,long sector,int prot)
-{
- int rc;
-
- switch (info->flash_id & FLASH_VENDMASK)
- {
- case (AMD_MANUFACT & FLASH_VENDMASK):
- rc = amd_flash_protect(info,sector,prot);
- break;
- case (FREESCALE_MANUFACT & FLASH_VENDMASK):
- rc = cfm_flash_protect(info,sector,prot);
- break;
- default:
- rc = ERR_UNKNOWN_FLASH_VENDOR;
- }
- return rc;
-}
-
-#endif
diff --git a/boards.cfg b/boards.cfg
index 7c1fc74..07699f7 100644
--- a/boards.cfg
+++ b/boards.cfg
@@ -361,7 +361,7 @@ M5235EVB m68k mcf523x m5235evb freesca
M5235EVB_Flash32 m68k mcf523x m5235evb freescale - M5235EVB:NORFLASH_PS32BIT,SYS_TEXT_BASE=0xFFC00000
cobra5272 m68k mcf52x2 cobra5272 -
idmr m68k mcf52x2
-eb_cpu5282 m68k mcf52x2 eb_cpu5282 BuS - eb_cpu5282:SYS_TEXT_BASE=0xFFE00000
+eb_cpu5282 m68k mcf52x2 eb_cpu5282 BuS - eb_cpu5282:SYS_TEXT_BASE=0xFF000000
eb_cpu5282_internal m68k mcf52x2 eb_cpu5282 BuS - eb_cpu5282:SYS_TEXT_BASE=0xF0000000
TASREG m68k mcf52x2 tasreg esd
M5208EVBE m68k mcf52x2 m5208evbe freescale
diff --git a/include/configs/eb_cpu5282.h b/include/configs/eb_cpu5282.h
index 9ecc10b..5a0d321 100644
--- a/include/configs/eb_cpu5282.h
+++ b/include/configs/eb_cpu5282.h
@@ -38,7 +38,7 @@
#define CONFIG_MCFUART
#define CONFIG_SYS_UART_PORT (0)
-#define CONFIG_BAUDRATE 9600
+#define CONFIG_BAUDRATE 115200
#undef CONFIG_MONITOR_IS_IN_RAM /* starts uboot direct */
@@ -52,20 +52,24 @@
#define CONFIG_RESET_TO_RETRY
#define CONFIG_SPLASH_SCREEN
+#define CONFIG_HW_WATCHDOG
+
+#define CONFIG_STATUS_LED
+#define CONFIG_BOARD_SPECIFIC_LED
+#define STATUS_LED_ACTIVE 0
+#define STATUS_LED_BIT 0x0008 /* Timer7 GPIO */
+#define STATUS_LED_BOOT 0
+#define STATUS_LED_PERIOD (CONFIG_SYS_HZ / 2)
+#define STATUS_LED_STATE STATUS_LED_OFF
+
/*----------------------------------------------------------------------*
* Configuration for environment *
* Environment is in the second sector of the first 256k of flash *
*----------------------------------------------------------------------*/
-#ifndef CONFIG_MONITOR_IS_IN_RAM
-#define CONFIG_ENV_ADDR 0xF003C000 /* End of 256K */
-#define CONFIG_ENV_SECT_SIZE 0x4000
-#define CONFIG_ENV_IS_IN_FLASH 1
-#else
-#define CONFIG_ENV_ADDR 0xFFE04000
-#define CONFIG_ENV_SECT_SIZE 0x2000
+#define CONFIG_ENV_ADDR 0xFF040000
+#define CONFIG_ENV_SECT_SIZE 0x00020000
#define CONFIG_ENV_IS_IN_FLASH 1
-#endif
/*
* BOOTP options
@@ -78,26 +82,24 @@
/*
* Command line configuration.
*/
+#define CONFIG_CMDLINE_EDITING
#include <config_cmd_default.h>
#undef CONFIG_CMD_LOADB
+#define CONFIG_CMD_DATE
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_LED
#define CONFIG_CMD_MII
#define CONFIG_CMD_NET
#define CONFIG_MCFTMR
-
#define CONFIG_BOOTDELAY 5
-#define CONFIG_SYS_HUSH_PARSER
-#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
#define CONFIG_SYS_PROMPT "\nEB+CPU5282> "
#define CONFIG_SYS_LONGHELP 1
-#if defined(CONFIG_CMD_KGDB)
#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
-#else
-#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
-#endif
#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
@@ -112,12 +114,12 @@
/*----------------------------------------------------------------------*
* Clock and PLL Configuration *
*----------------------------------------------------------------------*/
-#define CONFIG_SYS_HZ 10000000
-#define CONFIG_SYS_CLK 58982400 /* 9,8304MHz * 6 */
+#define CONFIG_SYS_HZ 1000
+#define CONFIG_SYS_CLK 80000000 /* 8MHz * 8 */
-/* PLL Configuration: Ext Clock * 6 (see table 9-4 of MCF user manual) */
+/* PLL Configuration: Ext Clock * 8 (see table 9-4 of MCF user manual) */
-#define CONFIG_SYS_MFD 0x01 /* PLL Multiplication Factor Devider */
+#define CONFIG_SYS_MFD 0x02 /* PLL Multiplication Factor Devider */
#define CONFIG_SYS_RFD 0x00 /* PLL Reduce Frecuency Devider */
/*----------------------------------------------------------------------*
@@ -135,7 +137,6 @@
#define CONFIG_SYS_FEC0_MIIBASE CONFIG_SYS_FEC0_IOBASE
#define MCFFEC_TOUT_LOOP 50000
-#define CONFIG_ETHADDR 00:CF:52:82:EB:01
#define CONFIG_OVERWRITE_ETHADDR_ONCE
/*-------------------------------------------------------------------------
@@ -151,7 +152,7 @@
*-----------------------------------------------------------------------*/
#define CONFIG_SYS_INIT_RAM_ADDR 0x20000000
-#define CONFIG_SYS_INIT_RAM_SIZE 0x10000
+#define CONFIG_SYS_INIT_RAM_SIZE 0x10000
#define CONFIG_SYS_GBL_DATA_OFFSET \
(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
@@ -161,12 +162,11 @@
* (Set up by the startup code)
* Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
*/
-#define CONFIG_SYS_SDRAM_BASE1 0x00000000
-#define CONFIG_SYS_SDRAM_SIZE1 16 /* SDRAM size in MB */
-
-#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_SDRAM_BASE1
-#define CONFIG_SYS_SDRAM_SIZE CONFIG_SYS_SDRAM_SIZE1
+#define CONFIG_SYS_SDRAM_BASE0 0x00000000
+#define CONFIG_SYS_SDRAM_SIZE0 16 /* SDRAM size in MB */
+#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_SDRAM_BASE0
+#define CONFIG_SYS_SDRAM_SIZE CONFIG_SYS_SDRAM_SIZE0
/* If M5282 port is fully implemented the monitor base will be behind
* the vector table. */
@@ -190,16 +190,24 @@
/*-----------------------------------------------------------------------
* FLASH organization
*/
+#define CONFIG_FLASH_SHOW_PROGRESS 45
#define CONFIG_SYS_FLASH_BASE CONFIG_SYS_CS0_BASE
#define CONFIG_SYS_INT_FLASH_BASE 0xF0000000
#define CONFIG_SYS_INT_FLASH_ENABLE 0x21
-#define CONFIG_SYS_MAX_FLASH_SECT 35
-#define CONFIG_SYS_MAX_FLASH_BANKS 2
+#define CONFIG_SYS_MAX_FLASH_SECT 128
+#define CONFIG_SYS_MAX_FLASH_BANKS 1
#define CONFIG_SYS_FLASH_ERASE_TOUT 10000000
#define CONFIG_SYS_FLASH_PROTECTION
+#define CONFIG_SYS_FLASH_CFI
+#define CONFIG_FLASH_CFI_DRIVER
+#define CONFIG_SYS_FLASH_SIZE 16*1024*1024
+#define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT
+
+#define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE }
+
/*-----------------------------------------------------------------------
* Cache Configuration
*/
@@ -221,12 +229,16 @@
* Memory bank definitions
*/
-#define CONFIG_SYS_CS0_BASE 0xFFE00000
+#define CONFIG_SYS_CS0_BASE 0xFF000000
#define CONFIG_SYS_CS0_CTRL 0x00001980
-#define CONFIG_SYS_CS0_MASK 0x001F0001
+#define CONFIG_SYS_CS0_MASK 0x00FF0001
-#define CONFIG_SYS_CS3_BASE 0xE0000000
-#define CONFIG_SYS_CS0_CTRL 0x00001980
+#define CONFIG_SYS_CS2_BASE 0xE0000000
+#define CONFIG_SYS_CS2_CTRL 0x00001980
+#define CONFIG_SYS_CS2_MASK 0x000F0001
+
+#define CONFIG_SYS_CS3_BASE 0xE0100000
+#define CONFIG_SYS_CS3_CTRL 0x00001980
#define CONFIG_SYS_CS3_MASK 0x000F0001
/*-----------------------------------------------------------------------
@@ -248,24 +260,42 @@
#define CONFIG_SYS_PCDDR 0x0000000
#define CONFIG_SYS_PCDAT 0x0000000
+#define CONFIG_SYS_PASPAR 0x0F0F
#define CONFIG_SYS_PEHLPAR 0xC0
#define CONFIG_SYS_PUAPAR 0x0F
#define CONFIG_SYS_DDRUA 0x05
#define CONFIG_SYS_PJPAR 0xFF
/*-----------------------------------------------------------------------
+ * I2C
+ */
+
+#define CONFIG_HARD_I2C
+#define CONFIG_FSL_I2C
+
+#define CONFIG_SYS_I2C_OFFSET 0x00000300
+#define CONFIG_SYS_IMMR CONFIG_SYS_MBAR
+
+#define CONFIG_SYS_I2C_SPEED 100000
+#define CONFIG_SYS_I2C_SLAVE 0
+
+#ifdef CONFIG_CMD_DATE
+#define CONFIG_RTC_DS1338
+#define CONFIG_I2C_RTC_ADDR 0x68
+#endif
+
+/*-----------------------------------------------------------------------
* VIDEO configuration
*/
#define CONFIG_VIDEO
#ifdef CONFIG_VIDEO
-#define CONFIG_VIDEO_VCXK 1
+#define CONFIG_VIDEO_VCXK 1
#define CONFIG_SYS_VCXK_DEFAULT_LINEALIGN 2
#define CONFIG_SYS_VCXK_DOUBLEBUFFERED 1
-#define CONFIG_SYS_VCXK_BASE CONFIG_SYS_CS3_BASE
-#define CONFIG_SYS_VCXK_AUTODETECT 1
+#define CONFIG_SYS_VCXK_BASE CONFIG_SYS_CS2_BASE
#define CONFIG_SYS_VCXK_ACKNOWLEDGE_PORT MCFGPTB_GPTPORT
#define CONFIG_SYS_VCXK_ACKNOWLEDGE_DDR MCFGPTB_GPTDDR
--
1.7.10.4
More information about the U-Boot
mailing list