[U-Boot] [PATCH 2/6 V6] EXYNOS: Add clock for SPI.
Hatim Ali
hatim.rv at samsung.com
Wed Oct 17 06:58:21 CEST 2012
From: Rajeshwari Shinde <rajeshwari.s at samsung.com>
This patch adds api to calculate and set the clock for SPI channels
Signed-off-by: James Miller <jamesmiller at chromium.org>
Signed-off-by: Simon Glass <sjg at chromium.org>
Signed-off-by: Rajeshwari Shinde <rajeshwari.s at samsung.com>
Signed-off-by: Hatim Ali <hatim.rv at samsung.com>
---
Changes since v4:
Added Signed-off-by of James Miller
Changes since v5:
Incorporated review comments by Minkyu Kang
arch/arm/cpu/armv7/exynos/clock.c | 124 ++++++++++++++++++++++++++++++++
arch/arm/include/asm/arch-exynos/clk.h | 4 +-
2 files changed, 127 insertions(+), 1 deletions(-)
diff --git a/arch/arm/cpu/armv7/exynos/clock.c b/arch/arm/cpu/armv7/exynos/clock.c
index 4f3b451..661557f 100644
--- a/arch/arm/cpu/armv7/exynos/clock.c
+++ b/arch/arm/cpu/armv7/exynos/clock.c
@@ -732,6 +732,122 @@ static unsigned long exynos5_get_i2c_clk(void)
return aclk_66;
}
+/**
+ * Linearly searches for the most accurate main and fine stage clock scalars
+ * (divisors) for a specified target frequency and scalar bit sizes by checking
+ * all multiples of main_scalar_bits values. Will always return scalars up to or
+ * slower than target.
+ *
+ * @param main_scalar_bits Number of main scalar bits, must be > 0 and < 32
+ * @param fine_scalar_bits Number of fine scalar bits, must be > 0 and < 32
+ * @param input_freq Clock frequency to be scaled in Hz
+ * @param target_freq Desired clock frequency in Hz
+ * @param best_fine_scalar Pointer to store the fine stage divisor
+ *
+ * @return best_main_scalar Main scalar for desired frequency or -1 if none
+ * found
+ */
+static int clock_calc_best_scalar(unsigned int main_scaler_bits,
+ unsigned int fine_scalar_bits, unsigned int input_rate,
+ unsigned int target_rate, unsigned int *best_fine_scalar)
+{
+ int i;
+ int best_main_scalar = -1;
+ unsigned int best_error = target_rate;
+ const unsigned int cap = (1 << fine_scalar_bits) - 1;
+ const unsigned int loops = 1 << main_scaler_bits;
+
+ debug("Input Rate is %u, Target is %u, Cap is %u\n", input_rate,
+ target_rate, cap);
+
+ assert(best_fine_scalar != NULL);
+ assert(main_scaler_bits <= fine_scalar_bits);
+
+ *best_fine_scalar = 1;
+
+ if (input_rate == 0 || target_rate == 0)
+ return -1;
+
+ if (target_rate >= input_rate)
+ return 1;
+
+ for (i = 1; i <= loops; i++) {
+ const unsigned int effective_div = max(min(input_rate / i /
+ target_rate, cap), 1);
+ const unsigned int effective_rate = input_rate / i /
+ effective_div;
+ const int error = target_rate - effective_rate;
+
+ debug("%d|effdiv:%u, effrate:%u, error:%d\n", i, effective_div,
+ effective_rate, error);
+
+ if (error >= 0 && error <= best_error) {
+ best_error = error;
+ best_main_scalar = i;
+ *best_fine_scalar = effective_div;
+ }
+ }
+
+ return best_main_scalar;
+}
+
+static int exynos5_set_spi_clk(enum periph_id periph_id,
+ unsigned int rate)
+{
+ struct exynos5_clock *clk =
+ (struct exynos5_clock *)samsung_get_base_clock();
+ int main;
+ unsigned int fine;
+ unsigned shift, pre_shift;
+ unsigned mask = 0xff;
+ u32 *reg;
+
+ main = clock_calc_best_scalar(4, 8, 400000000, rate, &fine);
+ if (main < 0) {
+ debug("%s: Cannot set clock rate for periph %d",
+ __func__, periph_id);
+ return -1;
+ }
+ main = main - 1;
+ fine = fine - 1;
+
+ switch (periph_id) {
+ case PERIPH_ID_SPI0:
+ reg = &clk->div_peric1;
+ shift = 0;
+ pre_shift = 8;
+ break;
+ case PERIPH_ID_SPI1:
+ reg = &clk->div_peric1;
+ shift = 16;
+ pre_shift = 24;
+ break;
+ case PERIPH_ID_SPI2:
+ reg = &clk->div_peric2;
+ shift = 0;
+ pre_shift = 8;
+ break;
+ case PERIPH_ID_SPI3:
+ reg = &clk->sclk_div_isp;
+ shift = 0;
+ pre_shift = 4;
+ break;
+ case PERIPH_ID_SPI4:
+ reg = &clk->sclk_div_isp;
+ shift = 12;
+ pre_shift = 16;
+ break;
+ default:
+ debug("%s: Unsupported peripheral ID %d\n", __func__,
+ periph_id);
+ return -1;
+ }
+ clrsetbits_le32(reg, mask << shift, (main & mask) << shift);
+ clrsetbits_le32(reg, mask << pre_shift, (fine & mask) << pre_shift);
+
+ return 0;
+}
+
unsigned long get_pll_clk(int pllreg)
{
if (cpu_is_exynos5())
@@ -803,3 +919,11 @@ void set_mipi_clk(void)
if (cpu_is_exynos4())
exynos4_set_mipi_clk();
}
+
+int set_spi_clk(enum periph_id periph_id, unsigned int rate)
+{
+ if (cpu_is_exynos5())
+ return exynos5_set_spi_clk(periph_id, rate);
+ else
+ return 0;
+}
diff --git a/arch/arm/include/asm/arch-exynos/clk.h b/arch/arm/include/asm/arch-exynos/clk.h
index 5529025..ff728b1 100644
--- a/arch/arm/include/asm/arch-exynos/clk.h
+++ b/arch/arm/include/asm/arch-exynos/clk.h
@@ -22,6 +22,8 @@
#ifndef __ASM_ARM_ARCH_CLK_H_
#define __ASM_ARM_ARCH_CLK_H_
+#include <asm/arch/periph.h>
+
#define APLL 0
#define MPLL 1
#define EPLL 2
@@ -38,5 +40,5 @@ void set_mmc_clk(int dev_index, unsigned int div);
unsigned long get_lcd_clk(void);
void set_lcd_clk(void);
void set_mipi_clk(void);
-
+int set_spi_clk(enum periph_id periph_id, unsigned int rate);
#endif
--
1.7.2.3
More information about the U-Boot
mailing list