[U-Boot] [PATCH 1/6 V6] EXYNOS5: Add pinmux support for SPI

Hatim Ali hatim.rv at samsung.com
Wed Oct 17 06:58:20 CEST 2012


From: Rajeshwari Shinde <rajeshwari.s at samsung.com>

This patch adds pinmux support for SPI channels

Signed-off-by: Rajeshwari Shinde <rajeshwari.s at samsung.com>
Signed-off-by: Hatim Ali <hatim.rv at samsung.com>
---
Changes since v4:
	Fixed minor nits suggested by Simon Glass
Changes since v5:
	No change

 arch/arm/cpu/armv7/exynos/pinmux.c        |   51 +++++++++++++++++++++++++++++
 arch/arm/include/asm/arch-exynos/periph.h |    5 +++
 2 files changed, 56 insertions(+), 0 deletions(-)

diff --git a/arch/arm/cpu/armv7/exynos/pinmux.c b/arch/arm/cpu/armv7/exynos/pinmux.c
index 5796d56..e01bef4 100644
--- a/arch/arm/cpu/armv7/exynos/pinmux.c
+++ b/arch/arm/cpu/armv7/exynos/pinmux.c
@@ -112,6 +112,7 @@ static int exynos5_mmc_config(int peripheral, int flags)
 		s5p_gpio_set_pull(bank, i, GPIO_PULL_UP);
 		s5p_gpio_set_drv(bank, i, GPIO_DRV_4X);
 	}
+
 	return 0;
 }
 
@@ -230,6 +231,49 @@ static void exynos5_i2c_config(int peripheral, int flags)
 	}
 }
 
+void exynos5_spi_config(int peripheral)
+{
+	int cfg = 0, pin = 0, i;
+	struct s5p_gpio_bank *bank = NULL;
+	struct exynos5_gpio_part1 *gpio1 =
+		(struct exynos5_gpio_part1 *) samsung_get_base_gpio_part1();
+	struct exynos5_gpio_part2 *gpio2 =
+		(struct exynos5_gpio_part2 *) samsung_get_base_gpio_part2();
+
+	switch (peripheral) {
+	case PERIPH_ID_SPI0:
+		bank = &gpio1->a2;
+		cfg = GPIO_FUNC(0x2);
+		pin = 0;
+		break;
+	case PERIPH_ID_SPI1:
+		bank = &gpio1->a2;
+		cfg = GPIO_FUNC(0x2);
+		pin = 4;
+		break;
+	case PERIPH_ID_SPI2:
+		bank = &gpio1->b1;
+		cfg = GPIO_FUNC(0x5);
+		pin = 1;
+		break;
+	case PERIPH_ID_SPI3:
+		bank = &gpio2->f1;
+		cfg = GPIO_FUNC(0x2);
+		pin = 0;
+		break;
+	case PERIPH_ID_SPI4:
+		for (i = 2; i < 4; i++)
+			s5p_gpio_cfg_pin(&gpio2->f0, i, GPIO_FUNC(0x4));
+		for (i = 4; i < 6; i++)
+			s5p_gpio_cfg_pin(&gpio2->e0, i, GPIO_FUNC(0x4));
+		break;
+	}
+	if (peripheral != PERIPH_ID_SPI4) {
+		for (i = pin; i < pin + 4; i++)
+			s5p_gpio_cfg_pin(bank, i, cfg);
+	}
+}
+
 static int exynos5_pinmux_config(int peripheral, int flags)
 {
 	switch (peripheral) {
@@ -257,6 +301,13 @@ static int exynos5_pinmux_config(int peripheral, int flags)
 	case PERIPH_ID_I2C7:
 		exynos5_i2c_config(peripheral, flags);
 		break;
+	case PERIPH_ID_SPI0:
+	case PERIPH_ID_SPI1:
+	case PERIPH_ID_SPI2:
+	case PERIPH_ID_SPI3:
+	case PERIPH_ID_SPI4:
+		exynos5_spi_config(peripheral);
+		break;
 	default:
 		debug("%s: invalid peripheral %d", __func__, peripheral);
 		return -1;
diff --git a/arch/arm/include/asm/arch-exynos/periph.h b/arch/arm/include/asm/arch-exynos/periph.h
index 082611c..4054fb6 100644
--- a/arch/arm/include/asm/arch-exynos/periph.h
+++ b/arch/arm/include/asm/arch-exynos/periph.h
@@ -44,6 +44,11 @@ enum periph_id {
 	PERIPH_ID_SDMMC3,
 	PERIPH_ID_SDMMC4,
 	PERIPH_ID_SROMC,
+	PERIPH_ID_SPI0,
+	PERIPH_ID_SPI1,
+	PERIPH_ID_SPI2,
+	PERIPH_ID_SPI3,
+	PERIPH_ID_SPI4,
 	PERIPH_ID_UART0,
 	PERIPH_ID_UART1,
 	PERIPH_ID_UART2,
-- 
1.7.2.3



More information about the U-Boot mailing list