[U-Boot] MPC8360 arbiter settings

[Liu Dave-R63238]

Michael,

How are you?
I believe we missed to change these for 8360. if you can submit a patch for this, it is better.

Thanks a lot.
 Dave

-----Original Message-----
From: Michael Barkowski [mailto:michaelbarkowski at ruggedcom.com] 
Sent: Tuesday, October 23, 2012 5:25 AM
To: Anton Vorontsov; Liu Dave-R63238
Cc: u-boot at lists.denx.de; Richard Retanubun
Subject: MPC8360 arbiter settings

Hello Anton and Dave,

I am seeing these MPC83xx arbiter settings in most boards except the 8360 ones. (Consistent with Ravi Chandran's recommendation at http://www.freescale.com/files/training_presentation/TP_QUICC_SYSTEM_OPTIMIZATION.pdf).
Is there some reason these are not used for 8360? From some of my experiments they seem to be beneficial.

/* Arbiter Configuration Register */
#define CONFIG_SYS_ACR_PIPE_DEP 3       /* Arbiter pipeline depth is 4 */
#define CONFIG_SYS_ACR_RPTCNT   3       /* Arbiter repeat count is 4 */

--
Michael Barkowski
Software Engineer, ROX Platform Infrastructure RuggedCom Software Engineering, Concord, Ontario