[U-Boot] [PATCH 1/3] Add nitrogen6x board

[Albert ARIBAUD]

Hi Eric,

On Fri, 05 Oct 2012 11:42:19 -0700, Eric Nelson
<eric.nelson at boundarydevices.com> wrote:

> On 10/05/2012 10:24 AM, Albert ARIBAUD wrote:
> > Hi Eric,
> >
> > On Thu,  4 Oct 2012 12:49:07 -0700, Eric Nelson
> > <eric.nelson at boundarydevices.com>  wrote:
> >
> >> Signed-off-by: Eric Nelson<eric.nelson at boundarydevices.com>
> >> ---
> >>   board/boundary/nitrogen6x/Makefile     |   41 ++
> >>   board/boundary/nitrogen6x/README       |   77 +++
> >>   board/boundary/nitrogen6x/nitrogen6x.c |  840 ++++++++++++++++++++++++++++++++
> >>   boards.cfg                             |    1 +
> >>   include/configs/nitrogen6x.h           |  242 +++++++++
> >>   5 files changed, 1201 insertions(+), 0 deletions(-)
> >>   create mode 100644 board/boundary/nitrogen6x/Makefile
> >>   create mode 100644 board/boundary/nitrogen6x/README
> >>   create mode 100644 board/boundary/nitrogen6x/nitrogen6x.c
> >>   create mode 100644 include/configs/nitrogen6x.h
> >
> > If this is essentially a copy of sabrelite, I am surprised that git
> > does not report any copies. Did you use -C with git format-patch ?
> >
> 
> Hi Albert,
> 
> I didn't use '-C' (didn't know about it: thanks for the tip!).
> 
> It wouldn't have detected copies though, because I made slight
> changes in each of these files, replacing the board names and
> file names in board/boundary/ and altering the default environment
> (policy bits) in nitrogen6x.h.

You should try -C. It does actually handle well 'imperfect' copies with
slight, or not so light changes.

> Regards,
> 
> Eric

Amicalement,
-- 
Albert.