[U-Boot] [PATCH 1/3] Add nitrogen6x board

Eric Nelson eric.nelson at boundarydevices.com
Sat Oct 6 02:23:58 CEST 2012


On 10/05/2012 12:29 PM, Albert ARIBAUD wrote:
> Hi Eric,
>
> On Fri, 05 Oct 2012 11:42:19 -0700, Eric Nelson
> <eric.nelson at boundarydevices.com>  wrote:
>
>> On 10/05/2012 10:24 AM, Albert ARIBAUD wrote:
>>> Hi Eric,
>>>
>>> On Thu,  4 Oct 2012 12:49:07 -0700, Eric Nelson
>>> <eric.nelson at boundarydevices.com>   wrote:
>>>
>>>> Signed-off-by: Eric Nelson<eric.nelson at boundarydevices.com>
>>>> ---
>>>>    board/boundary/nitrogen6x/Makefile     |   41 ++
>>>>    board/boundary/nitrogen6x/README       |   77 +++
>>>>    board/boundary/nitrogen6x/nitrogen6x.c |  840 ++++++++++++++++++++++++++++++++
>>>>    boards.cfg                             |    1 +
>>>>    include/configs/nitrogen6x.h           |  242 +++++++++
>>>>    5 files changed, 1201 insertions(+), 0 deletions(-)
>>>>    create mode 100644 board/boundary/nitrogen6x/Makefile
>>>>    create mode 100644 board/boundary/nitrogen6x/README
>>>>    create mode 100644 board/boundary/nitrogen6x/nitrogen6x.c
>>>>    create mode 100644 include/configs/nitrogen6x.h
>>>
>>> If this is essentially a copy of sabrelite, I am surprised that git
>>> does not report any copies. Did you use -C with git format-patch ?
>>>
>>
>> Hi Albert,
>>
>> I didn't use '-C' (didn't know about it: thanks for the tip!).
>>
>> It wouldn't have detected copies though, because I made slight
>> changes in each of these files, replacing the board names and
>> file names in board/boundary/ and altering the default environment
>> (policy bits) in nitrogen6x.h.
>
> You should try -C. It does actually handle well 'imperfect' copies with
> slight, or not so light changes.
>

Thanks again for the tip Albert. I'll use this for V2 (and knowing my
history, probably V3...).


More information about the U-Boot mailing list