[U-Boot] [PATCH v3 00/10] i2c for R-mobile

Heiko Schocher hs at denx.de
Tue Oct 16 05:55:58 CEST 2012


Hello Tetsuyuki Kobayashi,

On 14.09.2012 07:07, Tetsuyuki Kobayashi wrote:
> Iwamatu-san, thank you for review. This is v3 patch for sh_i2c.
> Changes for v3:
>   - call i2c_finish before returning i2c_probe, i2c_read, i2c_write even if error occured. Without this, it fails to boot Linux kernel after using "i2c probe" command.
>   - use setbits/clrbits macro as Iwamatsu-san pointed.
>
> Please check patch 5,6 and 10. The rest is not changed.
>
> This patch set is based on arm/rmobile branch of u-boot-sh.git.
>
>
> Tetsuyuki Kobayashi (10):
>    i2c: sh_i2c.c: support iccl and icch extension
>    i2c: sh_i2c.c: correct BUSY bit define in ICSR
>    i2c: sh_i2c.c: adjust for SH73A0
>    i2c: sh_i2c.c: support I2C2, I2C3 and I2C4
>    i2c: sh_i2c: enable i2c_probe
>    i2c: sh_i2c.c: check error in i2c_read and i2c_write
>    i2c: sh_i2c.c: remove unused function
>    arm: rmobile: kzm9g: enable I2C1
>    arm: rmobile: kzm9g: enable I2C2
>    i2c: sh_i2c: use setbits/clrbits macro
>
>   board/kmc/kzm9g/kzm9g.c |    7 ++-
>   drivers/i2c/sh_i2c.c    |  139 ++++++++++++++++++++++++++++++++---------------
>   include/configs/kzm9g.h |    8 ++-
>   3 files changed, 107 insertions(+), 47 deletions(-)

Applied this patchset (exept patch "i2c: sh_i2c.c: remove unused
function", as this patch is already in mainline) to u-boot-i2c master

Thanks!

bye,
Heiko
-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany


More information about the U-Boot mailing list