[U-Boot] [PATCH v7 04/16] tegra: fdt: Add LCD definitions for Tegra
Simon Glass
sjg at chromium.org
Thu Oct 18 01:24:48 CEST 2012
Add LCD definitions and also a proposed binding for LCD displays.
The PWM is as per what will likely be committed to linux-next soon.
The displaymode binding comes from a proposal here:
http://lists.freedesktop.org/archives/dri-devel/2012-July/024875.html
The panel binding is new, and fills a need to specify the panel
timings and other tegra-specific information. Should a binding appear
that allows the pwm to handle this automatically, we can revisit
this.
Signed-off-by: Simon Glass <sjg at chromium.org>
---
Changes in v6:
- Add an additional delay before enabling the panel
Changes in v5:
- Make all Tegra LCD fdt nodes disabled by default
Changes in v4:
- Moved panel information into panel node (was in rgb node)
- Remove LCD frame buffer address property hack
Changes in v3:
- Use displaymode binding for fdt
- Bring in proposed tegra display controller binding
- Add new panel binding to fit with tegra display controller binding
Changes in v2:
- Add nvidia prefix to device tree properties
arch/arm/dts/tegra20.dtsi | 98 ++++++++++++++++++++++++
doc/device-tree-bindings/video/displaymode.txt | 42 ++++++++++
doc/device-tree-bindings/video/tegra20-dc.txt | 85 ++++++++++++++++++++
3 files changed, 225 insertions(+), 0 deletions(-)
create mode 100644 doc/device-tree-bindings/video/displaymode.txt
create mode 100644 doc/device-tree-bindings/video/tegra20-dc.txt
diff --git a/arch/arm/dts/tegra20.dtsi b/arch/arm/dts/tegra20.dtsi
index 3221bc9..636ec2c 100644
--- a/arch/arm/dts/tegra20.dtsi
+++ b/arch/arm/dts/tegra20.dtsi
@@ -218,4 +218,102 @@
#pwm-cells = <2>;
};
+ host1x {
+ compatible = "nvidia,tegra20-host1x", "simple-bus";
+ reg = <0x50000000 0x00024000>;
+ interrupts = <0 65 0x04 /* mpcore syncpt */
+ 0 67 0x04>; /* mpcore general */
+ status = "disabled";
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ ranges = <0x54000000 0x54000000 0x04000000>;
+
+ /* video-encoding/decoding */
+ mpe {
+ reg = <0x54040000 0x00040000>;
+ interrupts = <0 68 0x04>;
+ status = "disabled";
+ };
+
+ /* video input */
+ vi {
+ reg = <0x54080000 0x00040000>;
+ interrupts = <0 69 0x04>;
+ status = "disabled";
+ };
+
+ /* EPP */
+ epp {
+ reg = <0x540c0000 0x00040000>;
+ interrupts = <0 70 0x04>;
+ status = "disabled";
+ };
+
+ /* ISP */
+ isp {
+ reg = <0x54100000 0x00040000>;
+ interrupts = <0 71 0x04>;
+ status = "disabled";
+ };
+
+ /* 2D engine */
+ gr2d {
+ reg = <0x54140000 0x00040000>;
+ interrupts = <0 72 0x04>;
+ status = "disabled";
+ };
+
+ /* 3D engine */
+ gr3d {
+ reg = <0x54180000 0x00040000>;
+ status = "disabled";
+ };
+
+ /* display controllers */
+ dc at 54200000 {
+ compatible = "nvidia,tegra20-dc";
+ reg = <0x54200000 0x00040000>;
+ interrupts = <0 73 0x04>;
+ status = "disabled";
+
+ rgb {
+ status = "disabled";
+ };
+ };
+
+ dc at 54240000 {
+ compatible = "nvidia,tegra20-dc";
+ reg = <0x54240000 0x00040000>;
+ interrupts = <0 74 0x04>;
+ status = "disabled";
+
+ rgb {
+ status = "disabled";
+ };
+ };
+
+ /* outputs */
+ hdmi {
+ compatible = "nvidia,tegra20-hdmi";
+ reg = <0x54280000 0x00040000>;
+ interrupts = <0 75 0x04>;
+ status = "disabled";
+ };
+
+ tvo {
+ compatible = "nvidia,tegra20-tvo";
+ reg = <0x542c0000 0x00040000>;
+ interrupts = <0 76 0x04>;
+ status = "disabled";
+ };
+
+ dsi {
+ compatible = "nvidia,tegra20-dsi";
+ reg = <0x54300000 0x00040000>;
+ status = "disabled";
+ };
+ };
+
};
diff --git a/doc/device-tree-bindings/video/displaymode.txt b/doc/device-tree-bindings/video/displaymode.txt
new file mode 100644
index 0000000..45ca42d
--- /dev/null
+++ b/doc/device-tree-bindings/video/displaymode.txt
@@ -0,0 +1,42 @@
+videomode bindings
+==================
+
+(from http://lists.freedesktop.org/archives/dri-devel/2012-July/024875.html)
+
+Required properties:
+ - xres, yres: Display resolution
+ - left-margin, right-margin, hsync-len: Horizontal Display timing
+ parameters in pixels
+ - upper-margin, lower-margin, vsync-len: Vertical display timing
+ parameters in lines
+ - clock: display clock in Hz
+
+Optional properties:
+ - width-mm, height-mm: Display dimensions in mm
+ - hsync-active-high (bool): Hsync pulse is active high
+ - vsync-active-high (bool): Vsync pulse is active high
+ - interlaced (bool): This is an interlaced mode
+ - doublescan (bool): This is a doublescan mode
+
+There are different ways of describing a display mode. The devicetree
+representation corresponds to the one used by the Linux Framebuffer
+framework described here in Documentation/fb/framebuffer.txt. This
+representation has been chosen because it's the only format which does
+not allow for inconsistent parameters. Unlike the Framebuffer framework
+the devicetree has the clock in Hz instead of ps.
+
+Example:
+
+ display at 0 {
+ /* 1920x1080p24 */
+ clock = <52000000>;
+ xres = <1920>;
+ yres = <1080>;
+ left-margin = <25>;
+ right-margin = <25>;
+ hsync-len = <25>;
+ lower-margin = <2>;
+ upper-margin = <2>;
+ vsync-len = <2>;
+ hsync-active-high;
+ };
diff --git a/doc/device-tree-bindings/video/tegra20-dc.txt b/doc/device-tree-bindings/video/tegra20-dc.txt
new file mode 100644
index 0000000..4731c3f
--- /dev/null
+++ b/doc/device-tree-bindings/video/tegra20-dc.txt
@@ -0,0 +1,85 @@
+Display Controller
+------------------
+
+(there isn't yet a generic binding in Linux, so this describes what is in
+U-Boot, and may change based on Linux activity)
+
+The device node for a display device is as described in the document
+"Open Firmware Recommended Practice : Universal Serial Bus" with the
+following modifications and additions :
+
+Required properties :
+ - compatible : Should be "nvidia,tegra20-dc"
+
+Required subnode 'rgb' is as follows:
+
+Required properties (rgb) :
+ - nvidia,panel : phandle of LCD panel information
+
+
+The panel node describes the panel itself. This has the properties listed in
+displaymode.txt as well as:
+
+Required properties (panel) :
+ - nvidia,bits-per-pixel: number of bits per pixel (depth)
+ - nvidia,pwm : pwm to use to set display contrast (see tegra20-pwm.txt)
+ - nvidia,panel-timings: 4 cells containing required timings in ms:
+ * delay before asserting panel_vdd
+ * delay between panel_vdd-rise and data-rise
+ * delay between data-rise and backlight_vdd-rise
+ * delay between backlight_vdd and pwm-rise
+ * delay between pwm-rise and backlight_en-rise
+
+Optional GPIO properies all have (phandle, GPIO number, flags):
+ - nvidia,backlight-enable-gpios: backlight enable GPIO
+ - nvidia,lvds-shutdown-gpios: LVDS power shutdown GPIO
+ - nvidia,backlight-vdd-gpios: backlight power GPIO
+ - nvidia,panel-vdd-gpios: panel power GPIO
+
+Example:
+
+host1x {
+ compatible = "nvidia,tegra20-host1x", "simple-bus";
+ reg = <0x50000000 0x00024000>;
+ interrupts = <0 65 0x04 /* mpcore syncpt */
+ 0 67 0x04>; /* mpcore general */
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+ status = "okay";
+
+ ranges = <0x54000000 0x54000000 0x04000000>;
+
+ dc at 54200000 {
+ compatible = "nvidia,tegra20-dc";
+ reg = <0x54200000 0x00040000>;
+ interrupts = <0 73 0x04>;
+ status = "okay";
+
+ rgb {
+ status = "okay";
+ nvidia,panel = <&lcd_panel>;
+ };
+ };
+};
+
+lcd_panel: panel {
+ /* Seaboard has 1366x768 */
+ clock = <70600000>;
+ xres = <1366>;
+ yres = <768>;
+ left-margin = <58>;
+ right-margin = <58>;
+ hsync-len = <58>;
+ lower-margin = <4>;
+ upper-margin = <4>;
+ vsync-len = <4>;
+ hsync-active-high;
+ nvidia,bits-per-pixel = <16>;
+ nvidia,pwm = <&pwm 2 0>;
+ nvidia,backlight-enable-gpios = <&gpio 28 0>; /* PD4 */
+ nvidia,lvds-shutdown-gpios = <&gpio 10 0>; /* PB2 */
+ nvidia,backlight-vdd-gpios = <&gpio 176 0>; /* PW0 */
+ nvidia,panel-vdd-gpios = <&gpio 22 0>; /* PC6 */
+ nvidia,panel-timings = <400 4 203 17 15>;
+};
--
1.7.7.3
More information about the U-Boot
mailing list