[U-Boot] [PATCH] mx53loco: Add support for SEIKO 4.3'' WVGA panel
Stefano Babic
sbabic at denx.de
Sat Oct 20 17:03:15 CEST 2012
Am 18/10/2012 20:49, schrieb Fabio Estevam:
> Add support for SEIKO 4.3'' WVGA panel on mx53loco.
>
> By default, the CLAA WVGA panel is selected.
>
> In order to support the SEIKO panel, undef CONFIG_CLAA_WVGA
> and define CONFIG_SEIKO_WVGA in mx53loco.h.
Hi Fabio,
in this way you have two different U-Boot binaries only to manage the
two displays, and automatically some "dead code" is added to U-Boot
because CONFIG_SEIKO_WVGA is not defined.
What about to use a u-boot environment to select the display ? Could be
a better solution for you ? You can then have a single u-boot image
managing both displays. I did in this way for the mt_ventoux board
(board/mt_ventoux/mt_ventoux.c), maybe can this help ?
Regards,
Stefano
>
> Signed-off-by: Fabio Estevam <fabio.estevam at freescale.com>
> ---
> board/freescale/mx53loco/mx53loco.c | 26 +++++++++++++++++++++++++-
> include/configs/mx53loco.h | 1 +
> 2 files changed, 26 insertions(+), 1 deletion(-)
>
> diff --git a/board/freescale/mx53loco/mx53loco.c b/board/freescale/mx53loco/mx53loco.c
> index a11e883..5709c97 100644
> --- a/board/freescale/mx53loco/mx53loco.c
> +++ b/board/freescale/mx53loco/mx53loco.c
> @@ -412,6 +412,7 @@ static void clock_1GHz(void)
> printf("CPU: Switch DDR clock to 400MHz failed\n");
> }
>
> +#if defined(CONFIG_CLAA_WVGA)
> static struct fb_videomode const claa_wvga = {
> .name = "CLAA07LC0ACW",
> .refresh = 57,
> @@ -427,6 +428,24 @@ static struct fb_videomode const claa_wvga = {
> .sync = 0,
> .vmode = FB_VMODE_NONINTERLACED
> };
> +#endif
> +
> +#if defined(CONFIG_SEIKO_WVGA)
> +static struct fb_videomode const seiko43wvga = {
> + .name = "Seiko-43WVF1G",
> + .refresh = 60,
> + .xres = 800,
> + .yres = 480,
> + .pixclock = 29851, /* picosecond (33.5 MHz) */
> + .left_margin = 89,
> + .right_margin = 164,
> + .upper_margin = 23,
> + .lower_margin = 10,
> + .hsync_len = 10,
> + .vsync_len = 10,
> + .sync = 0,
> +};
> +#endif
>
> void lcd_iomux(void)
> {
> @@ -470,7 +489,12 @@ void lcd_iomux(void)
>
> void lcd_enable(void)
> {
> - int ret = ipuv3_fb_init(&claa_wvga, 0, IPU_PIX_FMT_RGB565);
> + int ret;
> +#if defined(CONFIG_CLAA_WVGA)
> + ret = ipuv3_fb_init(&claa_wvga, 0, IPU_PIX_FMT_RGB565);
> +#elif defined(CONFIG_SEIKO_WVGA)
> + ret = ipuv3_fb_init(&seiko43wvga, 0, IPU_PIX_FMT_RGB24);
> +#endif
> if (ret)
> printf("LCD cannot be configured: %d\n", ret);
> }
> diff --git a/include/configs/mx53loco.h b/include/configs/mx53loco.h
> index 0658dd3..e60b155 100644
> --- a/include/configs/mx53loco.h
> +++ b/include/configs/mx53loco.h
> @@ -222,5 +222,6 @@
> #define CONFIG_BMP_16BPP
> #define CONFIG_VIDEO_LOGO
> #define CONFIG_IPUV3_CLK 200000000
> +#define CONFIG_CLAA_WVGA
>
> #endif /* __CONFIG_H */
>
--
=====================================================================
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================
More information about the U-Boot
mailing list