[U-Boot] Pull request: u-boot-arm/master to u-boot/master

[Minkyu Kang]

On 12 October 2012 14:55, Albert ARIBAUD <albert.u.boot at aribaud.net> wrote:
> On Fri, 12 Oct 2012 07:36:20 +0200, Albert ARIBAUD
> <albert.u.boot at aribaud.net> wrote:
>
>> Hi Tom,
>>
>> On Thu, 11 Oct 2012 11:45:35 -0700, Tom Rini <trini at ti.com> wrote:
>>
>> > On Thu, Oct 11, 2012 at 06:51:30PM +0200, Albert ARIBAUD wrote:
>> >
>> > > Hi Tom,
>> > >
>> > > The following changes since commit
>> > > 28e5ac2d974547bde0c72aa0c1d66fd22c6ef3ad:
>> > >
>> > >   arm: armv7: temporarily set -mno-unaligned-access (2012-10-05
>> > >   21:24:22 +0200)
>> > >
>> > > are available in the git repository at:
>> > >
>> > >   git://git.denx.de/u-boot-arm master
>> > >
>> > > for you to fetch changes up to 9b5dba537473578153961ee96ed23e37e1fde3f7:
>> > >
>> > >   exynos4: universal_C210: use software SPI (2012-10-10 20:37:39 +0900)
>> > >
>> > > ----------------------------------------------------------------
>> > > Chander Kashyap (1):
>> > >       Exynos5250: Enable PXE Support
>> > >
>> > > Piotr Wilczek (9):
>> > >       arm:exynos4:trats: Correct SDRAM configuration for trats
>> > >       arm:exynos4:trats: Fix SDRAM size
>> > >       arm:exynos4:pinmux: Modify the gpio function for mmc
>> > >       arm:exynos4:trats: Use pinmux for mmc configuration
>> > >       arm:exynos4:universal: Use pinmux for mmc configuration
>> > >       arm:exynos4:universal: Eliminated low level init
>> > >       arm: trats: Power down core 1
>> > >       drivers: spi: modify soft spi driver
>> > >       exynos4: universal_C210: use software SPI
>> > >
>> > > ??ukasz Majewski (1):
>> > >       gpio:fix: Proper handling of GPIO subsystem parts at Samsung
>> > > devices
>> > >
>> > >  arch/arm/cpu/armv7/exynos/pinmux.c           |   58 ++++
>> > >  arch/arm/include/asm/arch-exynos/gpio.h      |   19 ++
>> > >  arch/arm/include/asm/arch-exynos/periph.h    |    1 +
>> > >  arch/arm/include/asm/arch-s5pc1xx/gpio.h     |    7 +-
>> > >  board/samsung/trats/trats.c                  |   80 ++----
>> > >  board/samsung/universal_c210/Makefile        |    1 -
>> > >  board/samsung/universal_c210/lowlevel_init.S |  395
>> > >  --------------------------
>> > >  board/samsung/universal_c210/universal.c     |  116 ++++----
>> > >  drivers/gpio/s5p_gpio.c                      |    6 +-
>> > >  drivers/spi/soft_spi.c                       |    3 +
>> > >  include/configs/s5pc210_universal.h          |   21 ++
>> > >  include/configs/smdk5250.h                   |    6 +
>> > >  include/configs/trats.h                      |   17 +- 13 files
>> > >  changed, 209 insertions(+), 521 deletions(-) delete mode 100644
>> > >  board/samsung/universal_c210/lowlevel_init.S
>> >
>> > NAK, sorry.  We have a two problems now:
>> > - On PowerPC we have <asm/gpio.h> which takes <asm/arch/gpio.h> but
>> >   boards which do use soft_spi.c and now fail (taihu sacsng)
>> > - zipitz2 has the same problem (cc'ing Marek)
>>
>> Now that's very weird. I *know* I had issues with zipitz2 among others
>> when I git am'd the commits while the git server was down; then when
>> I could fetch u-boot/samsung I re-tested u-boot-samsung/master in
>> itself then merged into u-boot-arm/master, and I *know* those ran
>> fine... And now they don't. Something's fishy in my git repo. :(
>>
>> In any case: NAK fully understood and agreed upon, in my capacity as a
>> custodian, back-ported into ARM repo, i.e. I've rolled back ARM master
>> to where it was before the (ff) merge.
>>
>> Also, actually CC:ing Marek, as well as Minkyu.
>
> *Actually* CC:ing Minkyu...
>

CC:ing Piotr.


-- 
from. prom.
www.promsoft.net