[U-Boot] Pull request: u-boot-arm/master to u-boot/master

[Piotr Wilczek]

Dear All,

> -----Original Message-----
> From: Minkyu Kang [mailto:promsoft at gmail.com]
> Sent: Friday, October 12, 2012 8:47 AM
> To: Albert ARIBAUD; Piotr Wilczek
> Cc: U-Boot; Tom Rini; Marek Vasut
> Subject: Re: [U-Boot] Pull request: u-boot-arm/master to u-boot/master
> 
> On 12 October 2012 14:55, Albert ARIBAUD <albert.u.boot at aribaud.net>
> wrote:
> > On Fri, 12 Oct 2012 07:36:20 +0200, Albert ARIBAUD
> > <albert.u.boot at aribaud.net> wrote:
> >
> >> Hi Tom,
> >>
> >> On Thu, 11 Oct 2012 11:45:35 -0700, Tom Rini <trini at ti.com> wrote:
> >>
> >> > On Thu, Oct 11, 2012 at 06:51:30PM +0200, Albert ARIBAUD wrote:
> >> >
> >> > > Hi Tom,
> >> > >
> >> > > The following changes since commit
> >> > > 28e5ac2d974547bde0c72aa0c1d66fd22c6ef3ad:
> >> > >
> >> > >   arm: armv7: temporarily set -mno-unaligned-access (2012-10-05
> >> > >   21:24:22 +0200)
> >> > >
> >> > > are available in the git repository at:
> >> > >
> >> > >   git://git.denx.de/u-boot-arm master
> >> > >
> >> > > for you to fetch changes up to
> 9b5dba537473578153961ee96ed23e37e1fde3f7:
> >> > >
> >> > >   exynos4: universal_C210: use software SPI (2012-10-10 20:37:39
> >> > > +0900)
> >> > >
> >> > > ----------------------------------------------------------------
> >> > > Chander Kashyap (1):
> >> > >       Exynos5250: Enable PXE Support
> >> > >
> >> > > Piotr Wilczek (9):
> >> > >       arm:exynos4:trats: Correct SDRAM configuration for trats
> >> > >       arm:exynos4:trats: Fix SDRAM size
> >> > >       arm:exynos4:pinmux: Modify the gpio function for mmc
> >> > >       arm:exynos4:trats: Use pinmux for mmc configuration
> >> > >       arm:exynos4:universal: Use pinmux for mmc configuration
> >> > >       arm:exynos4:universal: Eliminated low level init
> >> > >       arm: trats: Power down core 1
> >> > >       drivers: spi: modify soft spi driver
> >> > >       exynos4: universal_C210: use software SPI
> >> > >
> >> > > ??ukasz Majewski (1):
> >> > >       gpio:fix: Proper handling of GPIO subsystem parts at
> >> > > Samsung devices
> >> > >
> >> > >  arch/arm/cpu/armv7/exynos/pinmux.c           |   58 ++++
> >> > >  arch/arm/include/asm/arch-exynos/gpio.h      |   19 ++
> >> > >  arch/arm/include/asm/arch-exynos/periph.h    |    1 +
> >> > >  arch/arm/include/asm/arch-s5pc1xx/gpio.h     |    7 +-
> >> > >  board/samsung/trats/trats.c                  |   80 ++----
> >> > >  board/samsung/universal_c210/Makefile        |    1 -
> >> > >  board/samsung/universal_c210/lowlevel_init.S |  395
> >> > >  --------------------------
> >> > >  board/samsung/universal_c210/universal.c     |  116 ++++----
> >> > >  drivers/gpio/s5p_gpio.c                      |    6 +-
> >> > >  drivers/spi/soft_spi.c                       |    3 +
> >> > >  include/configs/s5pc210_universal.h          |   21 ++
> >> > >  include/configs/smdk5250.h                   |    6 +
> >> > >  include/configs/trats.h                      |   17 +- 13 files
> >> > >  changed, 209 insertions(+), 521 deletions(-) delete mode 100644
> >> > > board/samsung/universal_c210/lowlevel_init.S
> >> >
> >> > NAK, sorry.  We have a two problems now:
> >> > - On PowerPC we have <asm/gpio.h> which takes <asm/arch/gpio.h>
> but
> >> >   boards which do use soft_spi.c and now fail (taihu sacsng)
> >> > - zipitz2 has the same problem (cc'ing Marek)
> >>
> >> Now that's very weird. I *know* I had issues with zipitz2 among
> >> others when I git am'd the commits while the git server was down;
> >> then when I could fetch u-boot/samsung I re-tested
> >> u-boot-samsung/master in itself then merged into u-boot-arm/master,
> >> and I *know* those ran fine... And now they don't. Something's fishy
> >> in my git repo. :(
> >>
> >> In any case: NAK fully understood and agreed upon, in my capacity as
> >> a custodian, back-ported into ARM repo, i.e. I've rolled back ARM
> >> master to where it was before the (ff) merge.
> >>
> >> Also, actually CC:ing Marek, as well as Minkyu.
> >
> > *Actually* CC:ing Minkyu...
> >
> 
> CC:ing Piotr.

The problem is caused by my patch. I will fix it as soon as possible.
Regards,
Piotr Wilczek

> 
> 
> --
> from. prom.
> www.promsoft.net