[U-Boot] [PATCH 02/11] arm: ks8695: more macros for register values
Yann Vernier
yann.vernier at orsoc.se
Fri Oct 5 14:09:49 CEST 2012
Adding macros for more configurable lowlevel_init code.
Also cleanup of some typos.
---
arch/arm/include/asm/arch-ks8695/platform.h | 55 ++++++++-----
arch/arm/include/asm/arch-ks8695/regvalues.h | 112 ++++++++++++++++++++++++++
2 files changed, 149 insertions(+), 18 deletions(-)
diff --git a/arch/arm/include/asm/arch-ks8695/platform.h b/arch/arm/include/asm/arch-ks8695/platform.h
index de20015..0ed0ecb 100644
--- a/arch/arm/include/asm/arch-ks8695/platform.h
+++ b/arch/arm/include/asm/arch-ks8695/platform.h
@@ -13,8 +13,8 @@
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
-#ifndef __address_h
-#define __address_h 1
+#ifndef __ASM_ARM_ARCH_PLATFORM_H__
+#define __ASM_ARM_ARCH_PLATFORM_H__
#define KS8695_SDRAM_START 0x00000000
#define KS8695_SDRAM_SIZE 0x01000000
@@ -27,19 +27,19 @@
#define KS8695_IO_BASE 0x03FF0000
#define KS8695_IO_SIZE 0x00010000
-#define KS8695_SYSTEN_CONFIG 0x00
-#define KS8695_SYSTEN_BUS_CLOCK 0x04
+#define KS8695_SYSTEM_CONFIG 0x00
+#define KS8695_SYSTEM_BUS_CLOCK 0x04
#define KS8695_FLASH_START 0x02800000
#define KS8695_FLASH_SIZE 0x00400000
-/*i/o control registers offset difinitions*/
+/*i/o control register offset definitions*/
#define KS8695_IO_CTRL0 0x4000
#define KS8695_IO_CTRL1 0x4004
#define KS8695_IO_CTRL2 0x4008
#define KS8695_IO_CTRL3 0x400C
-/*memory control registers offset difinitions*/
+/*memory control register offset definitions*/
#define KS8695_MEM_CTRL0 0x4010
#define KS8695_MEM_CTRL1 0x4014
#define KS8695_MEM_CTRL2 0x4018
@@ -51,7 +51,7 @@
#define KS8695_SDRAM_BUFFER 0x403C
#define KS8695_SDRAM_REFRESH 0x4040
-/*WAN control registers offset difinitions*/
+/*WAN control register offset definitions*/
#define KS8695_WAN_DMA_TX 0x6000
#define KS8695_WAN_DMA_RX 0x6004
#define KS8695_WAN_DMA_TX_START 0x6008
@@ -63,7 +63,7 @@
#define KS8695_WAN_MAC_ELOW 0x6080
#define KS8695_WAN_MAC_EHIGH 0x6084
-/*LAN control registers offset difinitions*/
+/*LAN control register offset definitions*/
#define KS8695_LAN_DMA_TX 0x8000
#define KS8695_LAN_DMA_RX 0x8004
#define KS8695_LAN_DMA_TX_START 0x8008
@@ -75,7 +75,7 @@
#define KS8695_LAN_MAC_ELOW 0X8080
#define KS8695_LAN_MAC_EHIGH 0X8084
-/*HPNA control registers offset difinitions*/
+/*HPNA control register offset definitions*/
#define KS8695_HPNA_DMA_TX 0xA000
#define KS8695_HPNA_DMA_RX 0xA004
#define KS8695_HPNA_DMA_TX_START 0xA008
@@ -87,7 +87,7 @@
#define KS8695_HPNA_MAC_ELOW 0xA080
#define KS8695_HPNA_MAC_EHIGH 0xA084
-/*UART control registers offset difinitions*/
+/*UART control register offset definitions*/
#define KS8695_UART_RX_BUFFER 0xE000
#define KS8695_UART_TX_HOLDING 0xE004
@@ -133,7 +133,7 @@
#define KS8695_UART_DIVISOR 0xE01C
#define KS8695_UART_STATUS 0xE020
-/*Interrupt controlller registers offset difinitions*/
+/*Interrupt controller register offset definitions*/
#define KS8695_INT_CONTL 0xE200
#define KS8695_INT_ENABLE 0xE204
#define KS8695_INT_ENABLE_MODEM 0x0800
@@ -154,19 +154,19 @@
#define KS8695_FIQ_PEND_PRIORITY 0xE230
#define KS8695_IRQ_PEND_PRIORITY 0xE234
-/*timer registers offset difinitions*/
+/*timer register offset definitions*/
#define KS8695_TIMER_CTRL 0xE400
#define KS8695_TIMER1 0xE404
#define KS8695_TIMER0 0xE408
#define KS8695_TIMER1_PCOUNT 0xE40C
#define KS8695_TIMER0_PCOUNT 0xE410
-/*GPIO registers offset difinitions*/
+/*GPIO register offset definitions*/
#define KS8695_GPIO_MODE 0xE600
#define KS8695_GPIO_CTRL 0xE604
#define KS8695_GPIO_DATA 0xE608
-/*SWITCH registers offset difinitions*/
+/*SWITCH register offset definitions*/
#define KS8695_SWITCH_CTRL0 0xE800
#define KS8695_SWITCH_CTRL1 0xE804
#define KS8695_SWITCH_PORT1 0xE808
@@ -184,13 +184,13 @@
#define KS8695_SWITCH_LPPM12 0xE874
#define KS8695_SWITCH_LPPM34 0xE878
-/*host communication registers difinitions*/
+/*host communication register definitions*/
#define KS8695_DSCP_HIGH 0xE834
#define KS8695_DSCP_LOW 0xE838
#define KS8695_SWITCH_MAC_HIGH 0xE83C
#define KS8695_SWITCH_MAC_LOW 0xE840
-/*miscellaneours registers difinitions*/
+/*miscellaneous register definitions*/
#define KS8695_MANAGE_COUNTER 0xE844
#define KS8695_MANAGE_DATA 0xE848
#define KS8695_LAN12_POWERMAGR 0xE84C
@@ -205,7 +205,7 @@
#define KS8695_WAN_PHY_CONTROL 0xEA14
#define KS8695_WAN_PHY_STATUS 0xEA18
-/* bus clock definitions*/
+/* bus clock definitions for KS8695_SYSTEM_BUS_CLOCK */
#define KS8695_BUS_CLOCK_125MHZ 0x0
#define KS8695_BUS_CLOCK_100MHZ 0x1
#define KS8695_BUS_CLOCK_62MHZ 0x2
@@ -215,8 +215,27 @@
#define KS8695_BUS_CLOCK_31MHZ 0x6
#define KS8695_BUS_CLOCK_25MHZ 0x7
+/* bus width definitions for KS8695_MEM_GENERAL and SDRAM_CTRL */
+#define KS8695_BUS_WIDTH_OFF 0
+#define KS8695_BUS_WIDTH_8 1
+#define KS8695_BUS_WIDTH_16 2
+#define KS8695_BUS_WIDTH_32 3
+
+/* register value definitions for memory controller */
+#define KS8695_SDCON_D_OFF (KS8695_BUS_WIDTH_OFF<<1)
+#define KS8695_SDCON_D_8 (KS8695_BUS_WIDTH_8<<1)
+#define KS8695_SDCON_D_16 (KS8695_BUS_WIDTH_16<<1)
+#define KS8695_SDCON_D_32 (KS8695_BUS_WIDTH_32<<1)
+#define KS8695_SDCON_2BANK 0x000
+#define KS8695_SDCON_4BANK 0x008
+#define KS8695_SDCON_CA_8BIT 0x000
+#define KS8695_SDCON_CA_9BIT 0x100
+#define KS8695_SDCON_CA_10BIT 0x200
+#define KS8695_SDCON_CA_11BIT 0x300
+#define KS8695_MEM_RANGE(BASE,SIZE) (((BASE)&0x03ff0000)>>(16-12) | (((BASE)+(SIZE)-1)&0x03ff0000)<<(22-16))
+
/* -------------------------------------------------------------------------------
- * definations for IRQ
+ * definitions for IRQ
* -------------------------------------------------------------------------------*/
#define KS8695_INT_EXT_INT0 2
diff --git a/arch/arm/include/asm/arch-ks8695/regvalues.h b/arch/arm/include/asm/arch-ks8695/regvalues.h
new file mode 100644
index 0000000..7d29bbf
--- /dev/null
+++ b/arch/arm/include/asm/arch-ks8695/regvalues.h
@@ -0,0 +1,112 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+#ifndef __ASM_ARM_ARCH_REGVALUES_H__
+#define __ASM_ARM_ARCH_REGVALUES_H__
+
+/* This file calculates register values set by low level initialization code
+ from configuration macros */
+
+#define CONFIG_SYS_SDCS0_BASE CONFIG_SYS_SDRAM_BASE
+#define CONFIG_SYS_SDCS0_SIZE CONFIG_SYS_SDRAM_SIZE
+
+#ifndef CONFIG_SYS_RCS0_SPEED
+/* access cycle time 5tmult+6, normal ROM (no pages) */
+# define CONFIG_SYS_RCS0_SPEED 0x040
+#endif
+#ifndef CONFIG_SYS_RCS0_WIDTH
+# define CONFIG_SYS_RCS0_WIDTH KS8695_BUS_WIDTH_8
+#endif
+
+#ifdef CONFIG_SYS_RCS1_BASE
+# ifndef CONFIG_SYS_RCS1_WIDTH
+# define CONFIG_SYS_RCS1_WIDTH CONFIG_SYS_RCS0_WIDTH
+# endif
+# ifndef CONFIG_SYS_RCS1_SPEED
+# define CONFIG_SYS_RCS1_SPEED CONFIG_SYS_RCS0_SPEED
+# endif
+#else
+# define CONFIG_SYS_RCS1_WIDTH KS8695_BUS_WIDTH_OFF
+#endif
+
+#ifndef CONFIG_SYS_ECS0_WIDTH
+# define CONFIG_SYS_ECS0_WIDTH KS8695_BUS_WIDTH_OFF
+#endif
+#ifndef CONFIG_SYS_ECS1_WIDTH
+# define CONFIG_SYS_ECS1_WIDTH KS8695_BUS_WIDTH_OFF
+#endif
+#ifndef CONFIG_SYS_ECS2_WIDTH
+# define CONFIG_SYS_ECS2_WIDTH KS8695_BUS_WIDTH_OFF
+#endif
+
+#ifndef CONFIG_KS8695_TMULT
+# define CONFIG_KS8695_TMULT 3
+#endif
+
+#if CONFIG_SYS_SDCS0_PARAMS
+# ifndef CONFIG_SYS_SDCS0_BASE
+# define CONFIG_SYS_SDCS0_BASE CONFIG_SYS_SDRAM_BASE
+# define CONFIG_SYS_SDCS0_SIZE CONFIG_SYS_SDRAM_SIZE
+# endif
+#endif
+
+#define CONFIG_KS8695_ROMCON0_VALUE \
+ (CONFIG_SYS_RCS0_SPEED | \
+ KS8695_MEM_RANGE(CONFIG_SYS_RCS0_BASE,CONFIG_SYS_RCS0_SIZE))
+#define CONFIG_KS8695_ROMCON1_VALUE \
+ (CONFIG_SYS_RCS1_SPEED | \
+ KS8695_MEM_RANGE(CONFIG_SYS_RCS1_BASE,CONFIG_SYS_RCS1_SIZE))
+#define CONFIG_KS8695_EXTACON0_VALUE \
+ (CONFIG_SYS_ECS0_SPEED | \
+ KS8695_MEM_RANGE(CONFIG_SYS_ECS0_BASE,CONFIG_SYS_ECS0_SIZE))
+#define CONFIG_KS8695_EXTACON1_VALUE \
+ (CONFIG_SYS_ECS1_SPEED | \
+ KS8695_MEM_RANGE(CONFIG_SYS_ECS1_BASE,CONFIG_SYS_ECS1_SIZE))
+#define CONFIG_KS8695_EXTACON2_VALUE \
+ (CONFIG_SYS_ECS2_SPEED | \
+ KS8695_MEM_RANGE(CONFIG_SYS_ECS2_BASE,CONFIG_SYS_ECS2_SIZE))
+
+#define CONFIG_KS8695_SDCON0_VALUE \
+ (CONFIG_SYS_SDCS0_PARAMS | \
+ KS8695_MEM_RANGE(CONFIG_SYS_SDCS0_BASE,CONFIG_SYS_SDCS0_SIZE))
+#define CONFIG_KS8695_SDCON1_VALUE \
+ (CONFIG_SYS_SDCS1_PARAMS | \
+ KS8695_MEM_RANGE(CONFIG_SYS_SDCS1_BASE,CONFIG_SYS_SDCS1_SIZE))
+
+#if CONFIG_SYS_SDRAM_RAS_CAS_DELAY<1 || CONFIG_SYS_SDRAM_RAS_CAS_DELAY>4
+#error Unsupported SDRAM timing: RAS to CAS delay
+#endif
+#ifndef CONFIG_SYS_SDRAM_CAS_LATENCY
+#define CONFIG_SYS_SDRAM_CAS_LATENCY ((CONFIG_SYS_SDRAM_MODE>>4)&7)
+#endif
+#if CONFIG_SYS_SDRAM_CAS_LATENCY<1 || CONFIG_SYS_SDRAM_CAS_LATENCY>4
+#error Unsupported SDRAM timing: CAS latency
+#endif
+#define CONFIG_KS8695_SDGCON_VALUE \
+ ((CONFIG_SYS_SDRAM_RAS_CAS_DELAY-1)<<2 | \
+ (CONFIG_SYS_SDRAM_CAS_LATENCY-1))
+#ifndef CONFIG_SYS_SDRAM_REFRESH_RATE
+#define CONFIG_SYS_SDRAM_REFRESH_RATE 0x0190
+#endif
+
+
+#define CONFIG_KS8695_ERGCON_VALUE (CONFIG_KS8695_TMULT<<28 | \
+ CONFIG_SYS_ECS2_WIDTH<<20 | \
+ CONFIG_SYS_ECS1_WIDTH<<18 | \
+ CONFIG_SYS_ECS0_WIDTH<<16 | \
+ CONFIG_SYS_RCS1_WIDTH<<2 | \
+ CONFIG_SYS_RCS0_WIDTH)
+
+#endif
--
1.7.10.4
More information about the U-Boot
mailing list