[U-Boot] [PATCH V2 4/5] ARM: tegra: select between Seaboard/Ventana at compile time

[Allen Martin]

On Thu, Oct 18, 2012 at 04:25:58PM -0700, Stephen Warren wrote:
> From: Stephen Warren <swarren at nvidia.com>
> 
> Seaboard and Ventana are very similar boards, and so share the seaboard.c
> board file. The one difference needed so far is detected at run-time by
> calling machine_is_ventana(). This bloats the Ventana build with code
> that is never used. Switch to detecting Ventana at compile time to remove
> bloat. This shaves ~5K off the SPL size on Ventana, and makes the SPL fit
> within the max size.
> 
> Signed-off-by: Stephen Warren <swarren at nvidia.com>
> ---
> v2: New patch to replace modification of CONFIG_SYS_TEXT_BASE.
> ---
>  board/nvidia/seaboard/seaboard.c |    4 ++--
>  1 files changed, 2 insertions(+), 2 deletions(-)
> 
> diff --git a/board/nvidia/seaboard/seaboard.c b/board/nvidia/seaboard/seaboard.c
> index 4e8a183..6dce57f 100644
> --- a/board/nvidia/seaboard/seaboard.c
> +++ b/board/nvidia/seaboard/seaboard.c
> @@ -35,6 +35,7 @@
>  
>  /* TODO: Remove this code when the SPI switch is working */
>  #ifndef CONFIG_SPI_UART_SWITCH
> +#if CONFIG_MACH_TYPE != MACH_TYPE_VENTANA

Why not roll this into the previous #ifdef intead of the back to back #ifdefs?


>  /*
>   * Routine: gpio_config_uart_seaboard
>   * Description: Force GPIO_PI3 low on Seaboard so UART4 works.
> @@ -48,11 +49,10 @@ static void gpio_config_uart_seaboard(void)
>  
>  void gpio_early_init_uart(void)
>  {
> -	if (machine_is_ventana())
> -		return;
>  	gpio_config_uart_seaboard();
>  }
>  #endif
> +#endif
>  
>  #ifdef CONFIG_TEGRA_MMC
>  /*
> -- 
> 1.7.0.4
> 

-Allen
-- 
nvpublic