[U-Boot] [PATCH V3 24/32] mx6: use CONFIG_MX6 instead of CONFIG_MX6Q

Stefano Babic sbabic at denx.de
Mon Oct 8 15:41:41 CEST 2012


On 04/10/2012 03:47, Troy Kisky wrote:
> Use CONFIG_MX6 when the particular processor
> variant isn't important.
> 
> Reserve the use of CONFIG_MX6Q to
> specifically test for quad cores variant.
> 
> Signed-off-by: Troy Kisky <troy.kisky at boundarydevices.com>
> ---
>  drivers/gpio/mxc_gpio.c            |    6 +++---
>  drivers/video/ipu_regs.h           |    2 +-
>  include/configs/mx6qarm2.h         |    1 +
>  include/configs/mx6qsabre_common.h |    1 +
>  include/configs/mx6qsabrelite.h    |    1 +
>  5 files changed, 7 insertions(+), 4 deletions(-)
> 
> diff --git a/drivers/gpio/mxc_gpio.c b/drivers/gpio/mxc_gpio.c
> index 2c79bff..a388064 100644
> --- a/drivers/gpio/mxc_gpio.c
> +++ b/drivers/gpio/mxc_gpio.c
> @@ -42,14 +42,14 @@ static unsigned long gpio_ports[] = {
>  	[1] = GPIO2_BASE_ADDR,
>  	[2] = GPIO3_BASE_ADDR,
>  #if defined(CONFIG_MX25) || defined(CONFIG_MX27) || defined(CONFIG_MX51) || \
> -		defined(CONFIG_MX53) || defined(CONFIG_MX6Q)
> +		defined(CONFIG_MX53) || defined(CONFIG_MX6)
>  	[3] = GPIO4_BASE_ADDR,
>  #endif
> -#if defined(CONFIG_MX27) || defined(CONFIG_MX53) || defined(CONFIG_MX6Q)
> +#if defined(CONFIG_MX27) || defined(CONFIG_MX53) || defined(CONFIG_MX6)
>  	[4] = GPIO5_BASE_ADDR,
>  	[5] = GPIO6_BASE_ADDR,
>  #endif
> -#if defined(CONFIG_MX53) || defined(CONFIG_MX6Q)
> +#if defined(CONFIG_MX53) || defined(CONFIG_MX6)
>  	[6] = GPIO7_BASE_ADDR,
>  #endif
>  };
> diff --git a/drivers/video/ipu_regs.h b/drivers/video/ipu_regs.h
> index a43aa03..982e252 100644
> --- a/drivers/video/ipu_regs.h
> +++ b/drivers/video/ipu_regs.h
> @@ -55,7 +55,7 @@
>  #define IPU_TPM_REG_BASE	0x01060000
>  #define IPU_DC_TMPL_REG_BASE	0x01080000
>  #define IPU_ISP_TBPR_REG_BASE	0x010C0000
> -#elif defined(CONFIG_MX6Q)
> +#elif defined(CONFIG_MX6)
>  #define IPU_CPMEM_REG_BASE	0x00100000
>  #define IPU_LUT_REG_BASE	0x00120000
>  #define IPU_SRM_REG_BASE	0x00140000
> diff --git a/include/configs/mx6qarm2.h b/include/configs/mx6qarm2.h
> index 965bea3..8e5b81e 100644
> --- a/include/configs/mx6qarm2.h
> +++ b/include/configs/mx6qarm2.h
> @@ -22,6 +22,7 @@
>  #ifndef __CONFIG_H
>  #define __CONFIG_H
>  
> +#define CONFIG_MX6
>  #define CONFIG_MX6Q
>  #define CONFIG_DISPLAY_CPUINFO
>  #define CONFIG_DISPLAY_BOARDINFO
> diff --git a/include/configs/mx6qsabre_common.h b/include/configs/mx6qsabre_common.h
> index 247e8d6..5a940da 100644
> --- a/include/configs/mx6qsabre_common.h
> +++ b/include/configs/mx6qsabre_common.h
> @@ -17,6 +17,7 @@
>  #ifndef __MX6QSABRE_COMMON_CONFIG_H
>  #define __MX6QSABRE_COMMON_CONFIG_H
>  
> +#define CONFIG_MX6
>  #define CONFIG_MX6Q
>  #define CONFIG_DISPLAY_CPUINFO
>  #define CONFIG_DISPLAY_BOARDINFO
> diff --git a/include/configs/mx6qsabrelite.h b/include/configs/mx6qsabrelite.h
> index e7bf658..6a10232 100644
> --- a/include/configs/mx6qsabrelite.h
> +++ b/include/configs/mx6qsabrelite.h
> @@ -22,6 +22,7 @@
>  #ifndef __CONFIG_H
>  #define __CONFIG_H
>  
> +#define CONFIG_MX6
>  #define CONFIG_MX6Q
>  #define CONFIG_DISPLAY_CPUINFO
>  #define CONFIG_DISPLAY_BOARDINFO
> 

This changes affects also mx6qsabreauto and mx6qsabresd, that I have
already merged.

Best regards,
Stefano Babic

-- 
=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================


More information about the U-Boot mailing list