[U-Boot] [PATCH v7 13/16] tegra: Support control of cache settings for LCD

[Simon Glass]

Add support for selecting the required cache mode for the LCD:
off, write-through or write-back.

Signed-off-by: Simon Glass <sjg at chromium.org>
---
Changes in v7:
- Rename mmu_set_region_dcache() to mmu_set_region_dcache_behaviour()

Changes in v3:
- Handle a cached frame buffer out of normal U-Boot memory

 drivers/video/tegra.c |   11 +++++++++++
 1 files changed, 11 insertions(+), 0 deletions(-)

diff --git a/drivers/video/tegra.c b/drivers/video/tegra.c
index ab26ad0..750a283 100644
--- a/drivers/video/tegra.c
+++ b/drivers/video/tegra.c
@@ -146,6 +146,7 @@ static void update_panel_size(struct fdt_disp_config *config)
 void lcd_ctrl_init(void *lcdbase)
 {
 	int line_length, size;
+	int type = DCACHE_OFF;
 
 	assert(disp_config);
 
@@ -161,6 +162,16 @@ void lcd_ctrl_init(void *lcdbase)
 		update_panel_size(disp_config);
 	size = lcd_get_size(&line_length);
 
+	/* Set up the LCD caching as requested */
+	if (config.cache_type & FDT_LCD_CACHE_WRITE_THROUGH)
+		type = DCACHE_WRITETHROUGH;
+	else if (config.cache_type & FDT_LCD_CACHE_WRITE_BACK)
+		type = DCACHE_WRITEBACK;
+	mmu_set_region_dcache_behaviour(disp_config->frame_buffer, size, type);
+
+	/* Enable flushing after LCD writes if requested */
+	lcd_set_flush_dcache(config.cache_type & FDT_LCD_CACHE_FLUSH);
+
 	debug("LCD frame buffer at %p\n", lcd_base);
 }
 
-- 
1.7.7.3