[U-Boot] [PATCH 70/72 V2] serial: Remove CONFIG_SERIAL_MULTI from remaining sources
Marek Vasut
marex at denx.de
Tue Oct 2 01:34:40 CEST 2012
Remove the parts depending either on disabled CONFIG_SERIAL_MULTI
or ifdefs around CONFIG_SERIAL_MULTI parts since CONFIG_SERIAL_MULTI
is now enabled by default.
Signed-off-by: Marek Vasut <marex at denx.de>
Cc: Marek Vasut <marek.vasut at gmail.com>
Cc: Tom Rini <trini at ti.com>
Cc: Anatolij Gustschin <agust at denx.de>
Cc: Stefan Roese <sr at denx.de>
---
arch/arm/lib/board.c | 2 --
arch/blackfin/lib/board.c | 2 --
arch/m68k/lib/board.c | 2 --
arch/microblaze/lib/board.c | 2 --
arch/nds32/lib/board.c | 2 --
arch/powerpc/lib/board.c | 2 --
arch/sandbox/lib/board.c | 2 --
arch/x86/lib/board.c | 2 --
common/cmd_nvedit.c | 2 --
common/fdt_support.c | 6 ++----
common/iomux.c | 2 --
common/stdio.c | 2 --
include/common.h | 12 ------------
include/serial.h | 2 +-
post/board/pdm360ng/coproc_com.c | 3 ---
15 files changed, 3 insertions(+), 42 deletions(-)
V2: Fix compiler warning about unused fdt_fill_multisername
diff --git a/arch/arm/lib/board.c b/arch/arm/lib/board.c
index 109a1ac..0b47ab3 100644
--- a/arch/arm/lib/board.c
+++ b/arch/arm/lib/board.c
@@ -492,9 +492,7 @@ void board_init_r(gd_t *id, ulong dest_addr)
#ifdef CONFIG_CLOCKS
set_cpu_clk_info(); /* Setup clock information */
#endif
-#ifdef CONFIG_SERIAL_MULTI
serial_initialize();
-#endif
debug("Now running in RAM - U-Boot at: %08lx\n", dest_addr);
diff --git a/arch/blackfin/lib/board.c b/arch/blackfin/lib/board.c
index c380d27..0b31f37 100644
--- a/arch/blackfin/lib/board.c
+++ b/arch/blackfin/lib/board.c
@@ -284,9 +284,7 @@ void board_init_f(ulong bootflag)
init_baudrate();
serial_early_puts("Serial init\n");
serial_init();
-#ifdef CONFIG_SERIAL_MULTI
serial_initialize();
-#endif
serial_early_puts("Console init flash\n");
console_init_f();
serial_early_puts("End of early debugging\n");
diff --git a/arch/m68k/lib/board.c b/arch/m68k/lib/board.c
index 2add630..67c9a13 100644
--- a/arch/m68k/lib/board.c
+++ b/arch/m68k/lib/board.c
@@ -401,9 +401,7 @@ void board_init_r (gd_t *id, ulong dest_addr)
gd->flags |= GD_FLG_RELOC; /* tell others: relocation done */
-#ifdef CONFIG_SERIAL_MULTI
serial_initialize();
-#endif
debug ("Now running in RAM - U-Boot at: %08lx\n", dest_addr);
diff --git a/arch/microblaze/lib/board.c b/arch/microblaze/lib/board.c
index 674b573..efd63cd 100644
--- a/arch/microblaze/lib/board.c
+++ b/arch/microblaze/lib/board.c
@@ -108,9 +108,7 @@ void board_init_f(ulong not_used)
*/
mem_malloc_init (CONFIG_SYS_MALLOC_BASE, CONFIG_SYS_MALLOC_LEN);
-#ifdef CONFIG_SERIAL_MULTI
serial_initialize();
-#endif
for (init_fnc_ptr = init_sequence; *init_fnc_ptr; ++init_fnc_ptr) {
WATCHDOG_RESET ();
diff --git a/arch/nds32/lib/board.c b/arch/nds32/lib/board.c
index 17d3ee0..89900fe 100644
--- a/arch/nds32/lib/board.c
+++ b/arch/nds32/lib/board.c
@@ -324,9 +324,7 @@ void board_init_r(gd_t *id, ulong dest_addr)
(ulong)(&__u_boot_cmd_end - &__u_boot_cmd_start));
#endif /* defined(CONFIG_NEEDS_MANUAL_RELOC) */
-#ifdef CONFIG_SERIAL_MULTI
serial_initialize();
-#endif
debug("Now running in RAM - U-Boot at: %08lx\n", dest_addr);
diff --git a/arch/powerpc/lib/board.c b/arch/powerpc/lib/board.c
index 07feaf5..b860141 100644
--- a/arch/powerpc/lib/board.c
+++ b/arch/powerpc/lib/board.c
@@ -672,9 +672,7 @@ void board_init_r(gd_t *id, ulong dest_addr)
gd->env_addr += dest_addr - CONFIG_SYS_MONITOR_BASE;
#endif
-#ifdef CONFIG_SERIAL_MULTI
serial_initialize();
-#endif
debug("Now running in RAM - U-Boot at: %08lx\n", dest_addr);
diff --git a/arch/sandbox/lib/board.c b/arch/sandbox/lib/board.c
index c173bf9..83858c1 100644
--- a/arch/sandbox/lib/board.c
+++ b/arch/sandbox/lib/board.c
@@ -220,9 +220,7 @@ void board_init_r(gd_t *id, ulong dest_addr)
gd->flags |= GD_FLG_RELOC; /* tell others: relocation done */
-#ifdef CONFIG_SERIAL_MULTI
serial_initialize();
-#endif
#ifdef CONFIG_POST
post_output_backlog();
diff --git a/arch/x86/lib/board.c b/arch/x86/lib/board.c
index 90cf7fc..e5caf13 100644
--- a/arch/x86/lib/board.c
+++ b/arch/x86/lib/board.c
@@ -150,9 +150,7 @@ init_fnc_t *init_sequence_r[] = {
timer_init,
display_banner,
display_dram_config,
-#ifdef CONFIG_SERIAL_MULTI
serial_initialize_r,
-#endif
#ifndef CONFIG_SYS_NO_FLASH
flash_init_r,
#endif
diff --git a/common/cmd_nvedit.c b/common/cmd_nvedit.c
index 3474bc6..1d67f20 100644
--- a/common/cmd_nvedit.c
+++ b/common/cmd_nvedit.c
@@ -237,10 +237,8 @@ int env_check_apply(const char *name, const char *oldval,
if (console_assign(console, newval) < 0)
return 1;
-#ifdef CONFIG_SERIAL_MULTI
if (serial_assign(newval) < 0)
return 1;
-#endif
#endif /* CONFIG_CONSOLE_MUX */
}
diff --git a/common/fdt_support.c b/common/fdt_support.c
index 593f16c..963ea90 100644
--- a/common/fdt_support.c
+++ b/common/fdt_support.c
@@ -94,7 +94,7 @@ int fdt_find_and_setprop(void *fdt, const char *node, const char *prop,
#ifdef CONFIG_OF_STDOUT_VIA_ALIAS
-#ifdef CONFIG_SERIAL_MULTI
+#ifdef CONFIG_CONS_INDEX
static void fdt_fill_multisername(char *sername, size_t maxlen)
{
const char *outname = stdio_devices[stdout]->name;
@@ -106,9 +106,7 @@ static void fdt_fill_multisername(char *sername, size_t maxlen)
if (strcmp(outname + 1, "serial") > 0)
strncpy(sername, outname + 1, maxlen);
}
-#else
-static inline void fdt_fill_multisername(char *sername, size_t maxlen) {}
-#endif /* CONFIG_SERIAL_MULTI */
+#endif
static int fdt_fixup_stdout(void *fdt, int chosenoff)
{
diff --git a/common/iomux.c b/common/iomux.c
index 91d98e9..dbc2312 100644
--- a/common/iomux.c
+++ b/common/iomux.c
@@ -135,7 +135,6 @@ int iomux_doenv(const int console, const char *arg)
*/
if (console_assign(console, start[j]) < 0)
continue;
-#ifdef CONFIG_SERIAL_MULTI
/*
* This was taken from common/cmd_nvedit.c.
* This will never work because serial_assign() returns
@@ -146,7 +145,6 @@ int iomux_doenv(const int console, const char *arg)
*/
if (serial_assign(start[j]) < 0)
continue;
-#endif
cons_set[cs_idx++] = dev;
}
free(console_args);
diff --git a/common/stdio.c b/common/stdio.c
index 1bf9ba0..605ff3f 100644
--- a/common/stdio.c
+++ b/common/stdio.c
@@ -227,9 +227,7 @@ int stdio_init (void)
drv_logbuff_init ();
#endif
drv_system_init ();
-#ifdef CONFIG_SERIAL_MULTI
serial_stdio_init ();
-#endif
#ifdef CONFIG_USB_TTY
drv_usbtty_init ();
#endif
diff --git a/include/common.h b/include/common.h
index 55025c0..b52a8a4 100644
--- a/include/common.h
+++ b/include/common.h
@@ -194,18 +194,6 @@ typedef void (interrupt_handler_t)(void *);
# endif
#endif
-#ifndef CONFIG_SERIAL_MULTI
-
-#if defined(CONFIG_8xx_CONS_SMC1) || defined(CONFIG_8xx_CONS_SMC2) \
- || defined(CONFIG_8xx_CONS_SCC1) || defined(CONFIG_8xx_CONS_SCC2) \
- || defined(CONFIG_8xx_CONS_SCC3) || defined(CONFIG_8xx_CONS_SCC4)
-
-#define CONFIG_SERIAL_MULTI 1
-
-#endif
-
-#endif /* CONFIG_SERIAL_MULTI */
-
/*
* General Purpose Utilities
*/
diff --git a/include/serial.h b/include/serial.h
index 01a86b4..a8d23f5 100644
--- a/include/serial.h
+++ b/include/serial.h
@@ -63,7 +63,7 @@ extern int usbtty_tstc(void);
#endif /* CONFIG_USB_TTY */
-#if defined(CONFIG_MPC512X) && defined(CONFIG_SERIAL_MULTI)
+#if defined(CONFIG_MPC512X)
extern struct stdio_dev *open_port(int num, int baudrate);
extern int close_port(int num);
extern int write_port(struct stdio_dev *port, char *buf);
diff --git a/post/board/pdm360ng/coproc_com.c b/post/board/pdm360ng/coproc_com.c
index 0755352..b7e02b5 100644
--- a/post/board/pdm360ng/coproc_com.c
+++ b/post/board/pdm360ng/coproc_com.c
@@ -28,8 +28,6 @@
#include <post.h>
#include <serial.h>
-#if defined(CONFIG_SERIAL_MULTI)
-
/*
* Actually the termination sequence of the coprocessor
* commands is "\r\n" (CR LF), but here we use a side effect of
@@ -94,4 +92,3 @@ int coprocessor_post_test(int flags)
return 0;
}
-#endif /* CONFIG_SERIAL_MULTI */
--
1.7.10.4
More information about the U-Boot
mailing list