[U-Boot] [PATCH 1/4] powerpc/t4qds: Add T4QDS board

[Andy Fleming]

On Thu, Oct 11, 2012 at 12:13 PM, York Sun <yorksun at freescale.com> wrote:
> The T4240QDS is a high-performance computing evaluation, development and
> test platform supporting the T4240 QorIQ Power Architecture™ processor.
>
> +
> +#define __USB_PHY_TYPE utmi
> +
> +#define        CONFIG_EXTRA_ENV_SETTINGS                               \
> +       "hwconfig=fsl_ddr:ctlr_intlv=3way_4KB,"         \
> +       "bank_intlv=auto;"                                      \
> +       "usb1:dr_mode=host,phy_type=" MK_STR(__USB_PHY_TYPE) "\0"\
> +       "netdev=eth0\0"                                         \
> +       "uboot=" MK_STR(CONFIG_UBOOTPATH) "\0"                  \
> +       "ubootaddr=" MK_STR(CONFIG_SYS_TEXT_BASE) "\0"                  \

Please note that MK_STR() has been eliminated in the top of tree.
Please use __stringify() in the future. I have fixed this patch, but
future patches should use __stringify.

Andy