[U-Boot] [PATCH V3 08/32] imximage: make header variable length

[Stefano Babic]

Am 04/10/2012 03:47, schrieb Troy Kisky:
> This makes the dcd table options as well for v2.
> Also, the header offset is no longer
> right before the code starts.
> 
> Before this patch we have
> 000000 402000d1 17800000 00000000 177ffc2c
> 000010 177ffc20 177ffc00 00000000 00000000
> 000020 177ff800 00042b58 00000000 402803d2
> 000030 042403cc a8050e02 30000000 b0050e02
> ... more DCD table
> 000340 cf0000f0 18000e02 7f007f00 1c000e02
> 000350 7f007f00 00000000 00000000 00000000
> 000360 00000000 00000000 00000000 00000000
> *
> 0003f0 00000000 00000000 00000000 00000400
> 000400 ea000014 e59ff014 e59ff014 e59ff014
> 
> Notice offset 3fc contains 0x400. This
> is the header offset. There is no reason
> for this to be in the file, and I have
> removed it.
> 
> After this patch we have
> 000000 402000d1 17800000 00000000 177ffcd8
> 000010 177ffccc 177ffcac 00000000 00000000
> 000020 177ff8ac 000426ac 00000000 402803d2
> 000030 042403cc a8050e02 30000000 b0050e02
> ... more DCD table
> 000340 cf0000f0 18000e02 7f007f00 1c000e02
> 000350 7f007f00 ea000014 e59ff014 e59ff014
> 000360 e59ff014 e59ff014 e59ff014 e59ff014
> 
> Notice the zeros between 0x354 and 0x3fb have
> been removed.
> 
> Signed-off-by: Troy Kisky <troy.kisky at boundarydevices.com>
> 
> ---


Hi Troy,

my test with this patch was not successful. I have tested it on a
mx53loco, and the board cannot boot. It stops after printing the RAM size:


U-Boot 2012.10-00226-g673b6b8 (Oct 20 2012 - 17:40:07)

Board: MX53 LOCO
I2C:   ready
DRAM:  1 GiB

Everything works fine without the patch (patches 1-7 already applied,
too). I wanted to test on V1 SOCs, too, but I stopped after seeing that
on a MX53 is not working.

Best regards,
Stefano Babic

-- 
=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================