[U-Boot] I2C on mx25

[Fabio Estevam]

On Wed, Oct 10, 2012 at 7:43 PM, Benoît Thébaudeau
<benoit.thebaudeau at advansee.com> wrote:

> Or for the Eth PHY connected to the FEC?

Yes, for the DP83640 PHY connected to the FEC. The Ethernet PHY is powered now.

>
>> Still not able to get FEC to work on mx25pdk, but it seems to be
>> another problem now.
>
> FYI, the FEC works fine for me in U-Boot for another i.MX25 board using a Micrel
> PHY. That required some patches for 2012.07, but they are now in u-boot/master.
> There are also some i.MX25 patches in u-boot-imx/next that might help, but I
> don't think that they were needed to make FEC work. However, I haven't updated
> yet to 2012.10-rc3, so there might be a regression somewhere, or an issue with
> the PHY.

Ok, thanks. I will debug more. If you have a chance to test mx25 FEC
with 2012.10-rc3, just let me know.

Thanks,

Fabio Estevam