[U-Boot] [PATCH 8/8] tegra: usb: move [start|stop]_port into ehci_hcd_[init|stop]
Lucas Stach
dev at lynxeye.de
Tue Oct 30 10:22:53 CET 2012
The ehci_hcd entry points were just calling into the Tegra USB functions. Now
that they are in the same file we can just move over the implementation.
Signed-off-by: Lucas Stach <dev at lynxeye.de>
---
arch/arm/include/asm/arch-tegra20/usb.h | 19 -------
drivers/usb/host/ehci-tegra.c | 93 +++++++++++++--------------------
2 Dateien geändert, 35 Zeilen hinzugefügt(+), 77 Zeilen entfernt(-)
diff --git a/arch/arm/include/asm/arch-tegra20/usb.h b/arch/arm/include/asm/arch-tegra20/usb.h
index b18c850..ef6c089 100644
--- a/arch/arm/include/asm/arch-tegra20/usb.h
+++ b/arch/arm/include/asm/arch-tegra20/usb.h
@@ -246,23 +246,4 @@ struct usb_ctlr {
/* Setup USB on the board */
int board_usb_init(const void *blob);
-/**
- * Start up the given port number (ports are numbered from 0 on each board).
- * This returns values for the appropriate hccr and hcor addresses to use for
- * USB EHCI operations.
- *
- * @param portnum port number to start
- * @param hccr returns start address of EHCI HCCR registers
- * @param hcor returns start address of EHCI HCOR registers
- * @return 0 if ok, -1 on error (generally invalid port number)
- */
-int tegrausb_start_port(int portnum, u32 *hccr, u32 *hcor);
-
-/**
- * Stop the current port
- *
- * @return 0 if ok, -1 if no port was active
- */
-int tegrausb_stop_port(int portnum);
-
#endif /* _TEGRA_USB_H_ */
diff --git a/drivers/usb/host/ehci-tegra.c b/drivers/usb/host/ehci-tegra.c
index 3df43a9..5966e2d 100644
--- a/drivers/usb/host/ehci-tegra.c
+++ b/drivers/usb/host/ehci-tegra.c
@@ -426,51 +426,6 @@ static int init_ulpi_usb_controller(struct fdt_usb *config)
}
#endif
-int tegrausb_start_port(int portnum, u32 *hccr, u32 *hcor)
-{
- struct fdt_usb *config;
- struct usb_ctlr *usbctlr;
-
- if (portnum >= port_count)
- return -1;
-
- config = &port[portnum];
-
- if (config->utmi && init_utmi_usb_controller(config)) {
- printf("tegrausb: Cannot init port %d\n", portnum);
- return -1;
- }
-
- if (config->ulpi && init_ulpi_usb_controller(config)) {
- printf("tegrausb: Cannot init port %d\n", portnum);
- return -1;
- }
-
- set_host_mode(config);
-
- usbctlr = config->reg;
- *hccr = (u32)&usbctlr->cap_length;
- *hcor = (u32)&usbctlr->usb_cmd;
- return 0;
-}
-
-int tegrausb_stop_port(int portnum)
-{
- struct usb_ctlr *usbctlr;
-
- usbctlr = port[portnum].reg;
-
- /* Stop controller */
- writel(0, &usbctlr->usb_cmd);
- udelay(1000);
-
- /* Initiate controller reset */
- writel(2, &usbctlr->usb_cmd);
- udelay(1000);
-
- return 0;
-}
-
int fdt_decode_usb(const void *blob, int node, struct fdt_usb *config)
{
const char *phy, *mode;
@@ -556,31 +511,53 @@ int board_usb_init(const void *blob)
}
/*
- * Create the appropriate control structures to manage
- * a new EHCI host controller.
+ * Initialize the USB controller and return the control structures.
*/
int ehci_hcd_init(int index, struct ehci_hccr **hccr, struct ehci_hcor **hcor)
{
- u32 our_hccr, our_hcor;
+ struct fdt_usb *config;
+ struct usb_ctlr *usbctlr;
- /*
- * Select the first port, as we don't have a way of selecting others
- * yet
- */
- if (tegrausb_start_port(index, &our_hccr, &our_hcor))
+ if (index >= port_count)
+ return -1;
+
+ config = &port[index];
+
+ if (config->utmi && init_utmi_usb_controller(config)) {
+ printf("tegrausb: Cannot init port %d\n", index);
+ return -1;
+ }
+
+ if (config->ulpi && init_ulpi_usb_controller(config)) {
+ printf("tegrausb: Cannot init port %d\n", index);
return -1;
+ }
+
+ set_host_mode(config);
- *hccr = (struct ehci_hccr *)our_hccr;
- *hcor = (struct ehci_hcor *)our_hcor;
+ usbctlr = config->reg;
+ *hccr = (struct ehci_hccr *)&usbctlr->cap_length;
+ *hcor = (struct ehci_hcor *)&usbctlr->usb_cmd;
return 0;
}
/*
- * Destroy the appropriate control structures corresponding
- * the the EHCI host controller.
+ * Bring down the USB controller.
*/
int ehci_hcd_stop(int index)
{
- return tegrausb_stop_port(index);
+ struct usb_ctlr *usbctlr;
+
+ usbctlr = port[index].reg;
+
+ /* Stop controller */
+ writel(0, &usbctlr->usb_cmd);
+ udelay(1000);
+
+ /* Initiate controller reset */
+ writel(2, &usbctlr->usb_cmd);
+ udelay(1000);
+
+ return 0;
}
--
1.7.11.7
More information about the U-Boot
mailing list