[U-Boot] [PATCH] powerpc/fm: fix TBI PHY address settings

[Shaohui Xie]

From: shaohui xie <Shaohui.Xie at freescale.com>

TBI PHY address (TBIPA) register is set in general frame manager
phy init funciton dtsec_init_phy() in drivers/net/fm/eth.c, and
it is supposed to set TBIPA on FM1 at DTSEC1 in case of FM1 at DTSEC1
isn't used directly, which provides MDIO for other ports. So
following code is wrong in case of FM2, which has a different
mac base.

struct dtsec *regs = (struct dtsec *)fm_eth->mac->base;
/* Assign a Physical address to the TBI */
out_be32(&regs->tbipa, CONFIG_SYS_TBIPA_VALUE);

Signed-off-by: Shaohui Xie <Shaohui.Xie at freescale.com>
---
 drivers/net/fm/eth.c |    2 +-
 1 files changed, 1 insertions(+), 1 deletions(-)

diff --git a/drivers/net/fm/eth.c b/drivers/net/fm/eth.c
index 2b616ad..c8dc1d0 100644
--- a/drivers/net/fm/eth.c
+++ b/drivers/net/fm/eth.c
@@ -65,7 +65,7 @@ void dtsec_configure_serdes(struct fm_eth *priv)
 static void dtsec_init_phy(struct eth_device *dev)
 {
 	struct fm_eth *fm_eth = dev->priv;
-	struct dtsec *regs = (struct dtsec *)fm_eth->mac->base;
+	struct dtsec *regs = (struct dtsec *)CONFIG_SYS_FSL_FM1_DTSEC1_ADDR;
 
 	/* Assign a Physical address to the TBI */
 	out_be32(&regs->tbipa, CONFIG_SYS_TBIPA_VALUE);
-- 
1.6.4