[U-Boot] [PATCH v2 16/22] spl/85xx: new SPL support
Scott Wood
scottwood at freescale.com
Tue Oct 30 03:05:04 CET 2012
Update CONFIG_RAMBOOT and CONFIG_NAND_SPL references to accept CONFIG_SPL
and CONFIG_SPL_BUILD, respectively. CONFIG_NAND_SPL can be removed once
the last mpc85xx nand_spl target is gone.
CONFIG_RAMBOOT will need to remain for other use cases, but it doesn't
seem right to overload it for meaning SPL as well as nand_spl does. Even
if it's somewhat appropriate for the main u-boot, the SPL itself isn't
(necessarily) ramboot, and we don't have separate configs for SPL and
main u-boot. It was also inconsistent, as other platforms such as
mpc83xx didn't use CONFIG_RAMBOOT in this way.
Signed-off-by: Scott Wood <scottwood at freescale.com>
Cc: Andy Fleming <afleming at freescale.com>
---
arch/powerpc/cpu/mpc85xx/cpu.c | 3 +-
arch/powerpc/cpu/mpc85xx/spl_minimal.c | 2 +-
arch/powerpc/cpu/mpc85xx/tlb.c | 4 +-
arch/powerpc/cpu/mpc85xx/u-boot-spl.lds | 87 +++++++++++++++++++++++++++++++
arch/powerpc/cpu/mpc8xxx/law.c | 11 ++--
doc/README.mpc85xx | 2 +-
6 files changed, 99 insertions(+), 10 deletions(-)
create mode 100644 arch/powerpc/cpu/mpc85xx/u-boot-spl.lds
diff --git a/arch/powerpc/cpu/mpc85xx/cpu.c b/arch/powerpc/cpu/mpc85xx/cpu.c
index db232e6..78486aa 100644
--- a/arch/powerpc/cpu/mpc85xx/cpu.c
+++ b/arch/powerpc/cpu/mpc85xx/cpu.c
@@ -332,7 +332,8 @@ void mpc85xx_reginfo(void)
/* Common ddr init for non-corenet fsl 85xx platforms */
#ifndef CONFIG_FSL_CORENET
-#if defined(CONFIG_SYS_RAMBOOT) && !defined(CONFIG_SYS_INIT_L2_ADDR)
+#if (defined(CONFIG_SYS_RAMBOOT) || defined(CONFIG_SPL)) && \
+ !defined(CONFIG_SYS_INIT_L2_ADDR)
phys_size_t initdram(int board_type)
{
#if defined(CONFIG_SPD_EEPROM) || defined(CONFIG_DDR_SPD)
diff --git a/arch/powerpc/cpu/mpc85xx/spl_minimal.c b/arch/powerpc/cpu/mpc85xx/spl_minimal.c
index 0589497..c6b9cd0 100644
--- a/arch/powerpc/cpu/mpc85xx/spl_minimal.c
+++ b/arch/powerpc/cpu/mpc85xx/spl_minimal.c
@@ -30,7 +30,7 @@ DECLARE_GLOBAL_DATA_PTR;
void cpu_init_f(void)
{
-#if defined(CONFIG_SYS_RAMBOOT) && defined(CONFIG_SYS_INIT_L2_ADDR)
+#ifdef CONFIG_SYS_INIT_L2_ADDR
ccsr_l2cache_t *l2cache = (void *)CONFIG_SYS_MPC85xx_L2_ADDR;
out_be32(&l2cache->l2srbar0, CONFIG_SYS_INIT_L2_ADDR);
diff --git a/arch/powerpc/cpu/mpc85xx/tlb.c b/arch/powerpc/cpu/mpc85xx/tlb.c
index a548dec..f44fadc 100644
--- a/arch/powerpc/cpu/mpc85xx/tlb.c
+++ b/arch/powerpc/cpu/mpc85xx/tlb.c
@@ -55,7 +55,7 @@ void init_tlbs(void)
return ;
}
-#ifndef CONFIG_NAND_SPL
+#if !defined(CONFIG_NAND_SPL) && !defined(CONFIG_SPL_BUILD)
void read_tlbcam_entry(int idx, u32 *valid, u32 *tsize, unsigned long *epn,
phys_addr_t *rpn)
{
@@ -332,4 +332,4 @@ void clear_ddr_tlbs(unsigned int memsize_in_meg)
}
-#endif /* !CONFIG_NAND_SPL */
+#endif /* not SPL */
diff --git a/arch/powerpc/cpu/mpc85xx/u-boot-spl.lds b/arch/powerpc/cpu/mpc85xx/u-boot-spl.lds
new file mode 100644
index 0000000..1c408e2
--- /dev/null
+++ b/arch/powerpc/cpu/mpc85xx/u-boot-spl.lds
@@ -0,0 +1,87 @@
+/*
+ * (C) Copyright 2006
+ * Wolfgang Denk, DENX Software Engineering, wd at denx.de
+ *
+ * Copyright 2009 Freescale Semiconductor, Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include "config.h" /* CONFIG_BOARDDIR */
+
+OUTPUT_ARCH(powerpc)
+SECTIONS
+{
+ . = CONFIG_SPL_TEXT_BASE;
+ .text : {
+ *(.text*)
+ }
+ _etext = .;
+
+ .reloc : {
+ _GOT2_TABLE_ = .;
+ KEEP(*(.got2))
+ KEEP(*(.got))
+ PROVIDE(_GLOBAL_OFFSET_TABLE_ = . + 4);
+ _FIXUP_TABLE_ = .;
+ KEEP(*(.fixup))
+ }
+ __got2_entries = ((_GLOBAL_OFFSET_TABLE_ - _GOT2_TABLE_) >> 2) - 1;
+ __fixup_entries = (. - _FIXUP_TABLE_) >> 2;
+
+ . = ALIGN(8);
+ .data : {
+ *(.rodata*)
+ *(.data*)
+ *(.sdata*)
+ }
+ _edata = .;
+
+ . = ALIGN(8);
+ __init_begin = .;
+ __init_end = .;
+/* FIXME for non-NAND SPL */
+#if defined(CONFIG_FSL_IFC) /* Restrict bootpg at 4K boundry for IFC */
+ .bootpg ADDR(.text) + 0x1000 :
+ {
+ start.o (.bootpg)
+ }
+#define RESET_VECTOR_OFFSET 0x1ffc /* IFC has 8K sram */
+#elif defined(CONFIG_FSL_ELBC)
+#define RESET_VECTOR_OFFSET 0xffc /* LBC has 4k sram */
+#else
+#error unknown NAND controller
+#endif
+ .resetvec ADDR(.text) + RESET_VECTOR_OFFSET : {
+ KEEP(*(.resetvec))
+ } = 0xffff
+
+ /*
+ * Make sure that the bss segment isn't linked at 0x0, otherwise its
+ * address won't be updated during relocation fixups.
+ */
+ . |= 0x10;
+
+ __bss_start = .;
+ .bss : {
+ *(.sbss*)
+ *(.bss*)
+ }
+ __bss_end__ = .;
+}
diff --git a/arch/powerpc/cpu/mpc8xxx/law.c b/arch/powerpc/cpu/mpc8xxx/law.c
index 223cd5d..ce1d71e 100644
--- a/arch/powerpc/cpu/mpc8xxx/law.c
+++ b/arch/powerpc/cpu/mpc8xxx/law.c
@@ -92,7 +92,7 @@ void disable_law(u8 idx)
return;
}
-#ifndef CONFIG_NAND_SPL
+#if !defined(CONFIG_NAND_SPL) && !defined(CONFIG_SPL_BUILD)
static int get_law_entry(u8 i, struct law_entry *e)
{
u32 lawar;
@@ -122,7 +122,7 @@ int set_next_law(phys_addr_t addr, enum law_size sz, enum law_trgt_if id)
return idx;
}
-#ifndef CONFIG_NAND_SPL
+#if !defined(CONFIG_NAND_SPL) && !defined(CONFIG_SPL_BUILD)
int set_last_law(phys_addr_t addr, enum law_size sz, enum law_trgt_if id)
{
u32 idx;
@@ -233,7 +233,7 @@ int set_ddr_laws(u64 start, u64 sz, enum law_trgt_if id)
return 0;
}
-#endif
+#endif /* not SPL */
void init_laws(void)
{
@@ -258,9 +258,10 @@ void init_laws(void)
gd->used_laws |= (1 << i);
}
-#if defined(CONFIG_NAND_U_BOOT) && !defined(CONFIG_NAND_SPL)
+#if (defined(CONFIG_NAND_U_BOOT) && !defined(CONFIG_NAND_SPL)) || \
+ (defined(CONFIG_SPL) && !defined(CONFIG_SPL_BUILD))
/*
- * in NAND boot we've already parsed the law_table and setup those LAWs
+ * in SPL boot we've already parsed the law_table and setup those LAWs
* so don't do it again.
*/
return;
diff --git a/doc/README.mpc85xx b/doc/README.mpc85xx
index 5a4b591..f9b023f 100644
--- a/doc/README.mpc85xx
+++ b/doc/README.mpc85xx
@@ -26,7 +26,7 @@ Major Config Switches during various boot Modes
----------------------------------------------
NOR boot
- !defined(CONFIG_SYS_RAMBOOT)
+ !defined(CONFIG_SYS_RAMBOOT) && !defined(CONFIG_SPL)
NOR boot Secure
!defined(CONFIG_SYS_RAMBOOT) && defined(CONFIG_SECURE_BOOT)
RAMBOOT(SD, SPI & NAND boot)
--
1.7.9.5
More information about the U-Boot
mailing list