[U-Boot] [PATCH v5 3/3] h2200: Add USB CDC ethernet support

Łukasz Dałek luk0104 at gmail.com
Wed Oct 3 02:24:08 CEST 2012


On 03.10.2012 02:18, Marek Vasut wrote:
> Dear Łukasz Dałek,
>
>> On 03.10.2012 02:06, Marek Vasut wrote:
>>> Dear Lukasz Dalek,
>>>
>>>> Add support for ethernet over USB which can be used for e.g. booting
>>>> process. It works with tftp and dhcp clients code.
>>>>
>>>> Signed-off-by: Lukasz Dalek<luk0104 at gmail.com>
>>>> ---
>>>>
>>>> Changes for v5:
>>>> 	- Surrendered #include<usb.h>   with CONFIGs
>>>> 	
>>>>    board/h2200/h2200.c     |   17 +++++++++++++++++
>>>>    boards.cfg              |    1 +
>>>>    include/configs/h2200.h |   27 +++++++++++++++++++++++++++
>>>>    3 files changed, 45 insertions(+), 0 deletions(-)
>>> [...]
>>>
>>>> diff --git a/boards.cfg b/boards.cfg
>>>> index ab10938..a03a469 100644
>>>> --- a/boards.cfg
>>>> +++ b/boards.cfg
>>>> @@ -283,6 +283,7 @@ pdnb3                        arm         ixp
>>>> pdnb3               prodriv scpu                         arm         ixp
>>>>
>>>>         pdnb3               prodrive       -           pdnb3:SCPU
>>>>         balloon3
>>>>
>>>>                     arm         pxa
>>>>
>>>>    h2200                        arm         pxa
>>>>
>>>> +h2200_usbeth                 arm         pxa         h2200
>>>>   -
>>> I told you to enable the USB ethernet by default, so why do you add this
>>> board?
>> I don't understand.
>> We agreed to split h2200 support into two parts. First one adding basic
>> support for device, second one adding support for usb ethernet for
>> h2200.
> Yes, but I fail to understand why you need TWO board entries for that. Adding
> the USB ethernet support is just a feature, you don't need additional board
> entry for that ... so what is the idea behind adding it?

Because easier is to type make h2200_usbeth_config than modifiy config.

Łukasz Dałek


More information about the U-Boot mailing list