[U-Boot] [PATCH V3 4/5] ARM: tegra: select between Seaboard/Ventana at compile time

[Stephen Warren]

From: Stephen Warren <swarren at nvidia.com>

Seaboard and Ventana are very similar boards, and so share the seaboard.c
board file. The one difference needed so far is detected at run-time by
calling machine_is_ventana(). This bloats the Ventana build with code
that is never used. Switch to detecting Ventana at compile time to remove
bloat. This shaves ~5K off the SPL size on Ventana, and makes the SPL fit
within the max size.

Signed-off-by: Stephen Warren <swarren at nvidia.com>
---
v3: Combined back-to-back #ifdefs.
v2: New patch to replace modification of CONFIG_SYS_TEXT_BASE.
---
 board/nvidia/seaboard/seaboard.c |    4 +---
 1 files changed, 1 insertions(+), 3 deletions(-)

diff --git a/board/nvidia/seaboard/seaboard.c b/board/nvidia/seaboard/seaboard.c
index 4e8a183..ea431e9 100644
--- a/board/nvidia/seaboard/seaboard.c
+++ b/board/nvidia/seaboard/seaboard.c
@@ -34,7 +34,7 @@
 #endif
 
 /* TODO: Remove this code when the SPI switch is working */
-#ifndef CONFIG_SPI_UART_SWITCH
+#if !defined(CONFIG_SPI_UART_SWITCH) && (CONFIG_MACH_TYPE != MACH_TYPE_VENTANA)
 /*
  * Routine: gpio_config_uart_seaboard
  * Description: Force GPIO_PI3 low on Seaboard so UART4 works.
@@ -48,8 +48,6 @@ static void gpio_config_uart_seaboard(void)
 
 void gpio_early_init_uart(void)
 {
-	if (machine_is_ventana())
-		return;
 	gpio_config_uart_seaboard();
 }
 #endif
-- 
1.7.0.4