[U-Boot] [PULL] : Please pull u-boot-imx/next
Albert ARIBAUD
albert.u.boot at aribaud.net
Tue Oct 9 18:53:35 CEST 2012
Hi Stefano,
On Mon, 08 Oct 2012 11:56:23 +0200, Stefano Babic <sbabic at denx.de>
wrote:
> Hi Albert,
>
> these changes are in my -next branch, so please pull them into arm/next.
>
> The following changes since commit 4668a086bb0a769b741e3a4ffab85f1c41c7cdb8:
>
> sandbox: Add asm/errno.h (2012-09-29 10:00:29 -0700)
>
> are available in the git repository at:
>
> git://www.denx.de/git/u-boot-imx.git next
>
> for you to fetch changes up to 635e9c5c1cd51f6f2cf9f62f01cb6aa436b119a6:
>
> configs: mx6qsabre_common.h: Use default clock definitions (2012-10-03
> 17:19:39 +0200)
>
> ----------------------------------------------------------------
> Benoît Thébaudeau (28):
> mx51evk: Add CONFIG_REVISION_TAG
> KARO TX25: Fix NAND Flash R/W cycle times
> mx5/6: Define default SoC input clock frequencies
> mx5 clocks: Cleanup
> mx5: Use explicit clock gate names
> mx5: Fix clock gate values
> mx51: Fix USB PHY clocks
> mx5 clocks: Add and use CCSR definitions
> mx5 clocks: Fix get_lp_apm()
> mx5 clocks: Fix get_periph_clk()
> mx5 clocks: Fix get_ipg_per_clk()
> mx5 clocks: Fix get_uart_clk()
> mx5 clocks: Simplify imx_get_cspiclk()
> mx5 clocks: Fix MXC_FEC_CLK
> mx51: Fix I2C clock ID check
> mx5/6 clocks: Fix SDHC clocks
> mx25: Fix decode_pll
> mx25: Clean up clock calculations
> mx25: Define more standard clocks
> mx25 clocks: Fix MXC_FEC_CLK
> mx25: Clean up clocks API
> mx25: Define cpu_eth_init() only if needed
> mx25: Fix eSDHC support
> mx5: Optimize lowlevel_init code size
> mx31: Add more CCM access macros
> mx35: Define MAX and AIPS registers
> mx31: Fix PDR0_CSI_PODF
> mx25: Clean up lowlevel_init
>
> Eric Benard (1):
> mx25: add CPU revision 1.2
>
> Eric Nelson (9):
> i.MX: mxc_ipuv3_fb: add ipuv3_fb_shutdown() routine to stop IPU
> frame buffer
> i.MX: shut down video before launch of O/S
> i.MX6: provide functional names for CCM_CCGR0-CCGR6 bit fields
> i.MX6: change register name for CCM_CHSCCDR to match ref. manual
> i.MX6: define bitfields for CHSCCDR register
> i.MX6: define IOMUX_GPR3 register bitfields
> i.MX6: Add ANATOP_PFD_480 bitfield constants
> i.MX6: define struct iomuxc and IOMUX_GPR2 register bitfields
> i.MX6: get rid of redundant struct src_regs (dupe of struct src)
>
> Fabio Estevam (9):
> mx28evk: Remove fecmxc_mii_postcall()
> mx6q: Factor out common DDR3 init code
> mx6: Add basic support for mx6qsabresd board.
> mx6qsabresd: Add Ethernet support
> mx6qsabresd: Add 8-bit USDHC support
> configs: mx6: Add a common config file
> mx6q: Add basic support for mx6qsabreauto
> mx6qsabreauto: Add Ethernet support
> configs: mx6qsabre_common.h: Use default clock definitions
>
> Matthias Weisser (1):
> imx: Use MXC_I2C_CLK in imx i2c driver
>
> Otavio Salvador (2):
> mx28evk: Add missing 'setexpr' command
> mx6qsabreauto: Use ttymxc3 as console
>
> MAINTAINERS | 2 +
> arch/arm/cpu/arm1136/mx31/generic.c | 1 +
> arch/arm/cpu/arm1136/mx35/asm-offsets.c | 33 +-
> arch/arm/cpu/arm1136/mx35/generic.c | 1 +
> arch/arm/cpu/arm926ejs/mx25/generic.c | 66 +--
> arch/arm/cpu/armv7/mx5/clock.c | 454
> +++++++++++---------
> arch/arm/cpu/armv7/mx5/lowlevel_init.S | 112 ++---
> arch/arm/cpu/armv7/mx6/clock.c | 31 +-
> arch/arm/cpu/armv7/mx6/soc.c | 2 +-
> arch/arm/imx-common/cpu.c | 9 +
> arch/arm/imx-common/speed.c | 18 +-
> arch/arm/imx-common/timer.c | 12 +-
> arch/arm/include/asm/arch-mx25/clock.h | 14 +-
> arch/arm/include/asm/arch-mx25/imx-regs.h | 1 +
> arch/arm/include/asm/arch-mx25/macro.h | 87 +++-
> arch/arm/include/asm/arch-mx31/clock.h | 1 +
> arch/arm/include/asm/arch-mx31/imx-regs.h | 16 +-
> arch/arm/include/asm/arch-mx35/clock.h | 1 +
> arch/arm/include/asm/arch-mx35/imx-regs.h | 52 +++
> arch/arm/include/asm/arch-mx5/clock.h | 22 +-
> arch/arm/include/asm/arch-mx5/crm_regs.h | 419
> +++++++++++++++++-
> arch/arm/include/asm/arch-mx5/imx-regs.h | 2 +
> arch/arm/include/asm/arch-mx6/clock.h | 15 +
> arch/arm/include/asm/arch-mx6/crm_regs.h | 364 ++++++++--------
> arch/arm/include/asm/arch-mx6/imx-regs.h | 166 ++++++-
> .../imximage.cfg => imx/ddr/mx6q_4x_mt41j128.cfg} | 0
> board/freescale/mx28evk/mx28evk.c | 25 --
> board/freescale/mx31ads/lowlevel_init.S | 4 +-
> board/freescale/mx51evk/mx51evk.c | 8 +
> board/freescale/mx53loco/mx53loco.c | 2 +-
> board/freescale/mx6qsabreauto/Makefile | 41 ++
> board/freescale/mx6qsabreauto/imximage.cfg | 159 +++++++
> board/freescale/mx6qsabreauto/mx6qsabreauto.c | 192 +++++++++
> board/freescale/mx6qsabresd/Makefile | 41 ++
> board/freescale/mx6qsabresd/mx6qsabresd.c | 198 +++++++++
> board/hale/tt01/tt01.c | 2 +-
> board/imx31_phycore/lowlevel_init.S | 2 +-
> board/karo/tx25/lowlevel_init.S | 42 +-
> board/logicpd/imx31_litekit/lowlevel_init.S | 2 +-
> boards.cfg | 4 +-
> drivers/i2c/mxc_i2c.c | 4 +-
> drivers/usb/host/ehci-mx5.c | 3 +-
> drivers/video/ipu_common.c | 12 +-
> drivers/video/mxc_ipuv3_fb.c | 20 +
> include/configs/ima3-mx53.h | 3 -
> include/configs/mx28evk.h | 1 +
> include/configs/mx31pdk.h | 10 +-
> include/configs/mx51_efikamx.h | 2 -
> include/configs/mx51evk.h | 3 +-
> include/configs/mx53ard.h | 2 -
> include/configs/mx53evk.h | 2 -
> include/configs/mx53loco.h | 2 -
> include/configs/mx53smd.h | 2 -
> include/configs/mx6qarm2.h | 2 -
> include/configs/mx6qsabre_common.h | 177 ++++++++
> include/configs/mx6qsabreauto.h | 22 +
> include/configs/mx6qsabrelite.h | 2 -
> include/configs/mx6qsabresd.h | 27 ++
> include/configs/vision2.h | 2 -
> include/ipu_pixfmt.h | 1 +
> 60 files changed, 2277 insertions(+), 645 deletions(-)
> rename board/freescale/{mx6qsabrelite/imximage.cfg =>
> imx/ddr/mx6q_4x_mt41j128.cfg} (100%)
> create mode 100644 board/freescale/mx6qsabreauto/Makefile
> create mode 100644 board/freescale/mx6qsabreauto/imximage.cfg
> create mode 100644 board/freescale/mx6qsabreauto/mx6qsabreauto.c
> create mode 100644 board/freescale/mx6qsabresd/Makefile
> create mode 100644 board/freescale/mx6qsabresd/mx6qsabresd.c
> create mode 100644 include/configs/mx6qsabre_common.h
> create mode 100644 include/configs/mx6qsabreauto.h
> create mode 100644 include/configs/mx6qsabresd.h
>
> Best regards,
> Stefano
>
Applied to u-boot-arm/next, thanks!
Amicalement,
--
Albert.
More information about the U-Boot
mailing list