[U-Boot] [PULL] : Please pull u-boot-imx/next
Stefano Babic
sbabic at denx.de
Mon Oct 8 11:56:23 CEST 2012
Hi Albert,
these changes are in my -next branch, so please pull them into arm/next.
The following changes since commit 4668a086bb0a769b741e3a4ffab85f1c41c7cdb8:
sandbox: Add asm/errno.h (2012-09-29 10:00:29 -0700)
are available in the git repository at:
git://www.denx.de/git/u-boot-imx.git next
for you to fetch changes up to 635e9c5c1cd51f6f2cf9f62f01cb6aa436b119a6:
configs: mx6qsabre_common.h: Use default clock definitions (2012-10-03
17:19:39 +0200)
----------------------------------------------------------------
Benoît Thébaudeau (28):
mx51evk: Add CONFIG_REVISION_TAG
KARO TX25: Fix NAND Flash R/W cycle times
mx5/6: Define default SoC input clock frequencies
mx5 clocks: Cleanup
mx5: Use explicit clock gate names
mx5: Fix clock gate values
mx51: Fix USB PHY clocks
mx5 clocks: Add and use CCSR definitions
mx5 clocks: Fix get_lp_apm()
mx5 clocks: Fix get_periph_clk()
mx5 clocks: Fix get_ipg_per_clk()
mx5 clocks: Fix get_uart_clk()
mx5 clocks: Simplify imx_get_cspiclk()
mx5 clocks: Fix MXC_FEC_CLK
mx51: Fix I2C clock ID check
mx5/6 clocks: Fix SDHC clocks
mx25: Fix decode_pll
mx25: Clean up clock calculations
mx25: Define more standard clocks
mx25 clocks: Fix MXC_FEC_CLK
mx25: Clean up clocks API
mx25: Define cpu_eth_init() only if needed
mx25: Fix eSDHC support
mx5: Optimize lowlevel_init code size
mx31: Add more CCM access macros
mx35: Define MAX and AIPS registers
mx31: Fix PDR0_CSI_PODF
mx25: Clean up lowlevel_init
Eric Benard (1):
mx25: add CPU revision 1.2
Eric Nelson (9):
i.MX: mxc_ipuv3_fb: add ipuv3_fb_shutdown() routine to stop IPU
frame buffer
i.MX: shut down video before launch of O/S
i.MX6: provide functional names for CCM_CCGR0-CCGR6 bit fields
i.MX6: change register name for CCM_CHSCCDR to match ref. manual
i.MX6: define bitfields for CHSCCDR register
i.MX6: define IOMUX_GPR3 register bitfields
i.MX6: Add ANATOP_PFD_480 bitfield constants
i.MX6: define struct iomuxc and IOMUX_GPR2 register bitfields
i.MX6: get rid of redundant struct src_regs (dupe of struct src)
Fabio Estevam (9):
mx28evk: Remove fecmxc_mii_postcall()
mx6q: Factor out common DDR3 init code
mx6: Add basic support for mx6qsabresd board.
mx6qsabresd: Add Ethernet support
mx6qsabresd: Add 8-bit USDHC support
configs: mx6: Add a common config file
mx6q: Add basic support for mx6qsabreauto
mx6qsabreauto: Add Ethernet support
configs: mx6qsabre_common.h: Use default clock definitions
Matthias Weisser (1):
imx: Use MXC_I2C_CLK in imx i2c driver
Otavio Salvador (2):
mx28evk: Add missing 'setexpr' command
mx6qsabreauto: Use ttymxc3 as console
MAINTAINERS | 2 +
arch/arm/cpu/arm1136/mx31/generic.c | 1 +
arch/arm/cpu/arm1136/mx35/asm-offsets.c | 33 +-
arch/arm/cpu/arm1136/mx35/generic.c | 1 +
arch/arm/cpu/arm926ejs/mx25/generic.c | 66 +--
arch/arm/cpu/armv7/mx5/clock.c | 454
+++++++++++---------
arch/arm/cpu/armv7/mx5/lowlevel_init.S | 112 ++---
arch/arm/cpu/armv7/mx6/clock.c | 31 +-
arch/arm/cpu/armv7/mx6/soc.c | 2 +-
arch/arm/imx-common/cpu.c | 9 +
arch/arm/imx-common/speed.c | 18 +-
arch/arm/imx-common/timer.c | 12 +-
arch/arm/include/asm/arch-mx25/clock.h | 14 +-
arch/arm/include/asm/arch-mx25/imx-regs.h | 1 +
arch/arm/include/asm/arch-mx25/macro.h | 87 +++-
arch/arm/include/asm/arch-mx31/clock.h | 1 +
arch/arm/include/asm/arch-mx31/imx-regs.h | 16 +-
arch/arm/include/asm/arch-mx35/clock.h | 1 +
arch/arm/include/asm/arch-mx35/imx-regs.h | 52 +++
arch/arm/include/asm/arch-mx5/clock.h | 22 +-
arch/arm/include/asm/arch-mx5/crm_regs.h | 419
+++++++++++++++++-
arch/arm/include/asm/arch-mx5/imx-regs.h | 2 +
arch/arm/include/asm/arch-mx6/clock.h | 15 +
arch/arm/include/asm/arch-mx6/crm_regs.h | 364 ++++++++--------
arch/arm/include/asm/arch-mx6/imx-regs.h | 166 ++++++-
.../imximage.cfg => imx/ddr/mx6q_4x_mt41j128.cfg} | 0
board/freescale/mx28evk/mx28evk.c | 25 --
board/freescale/mx31ads/lowlevel_init.S | 4 +-
board/freescale/mx51evk/mx51evk.c | 8 +
board/freescale/mx53loco/mx53loco.c | 2 +-
board/freescale/mx6qsabreauto/Makefile | 41 ++
board/freescale/mx6qsabreauto/imximage.cfg | 159 +++++++
board/freescale/mx6qsabreauto/mx6qsabreauto.c | 192 +++++++++
board/freescale/mx6qsabresd/Makefile | 41 ++
board/freescale/mx6qsabresd/mx6qsabresd.c | 198 +++++++++
board/hale/tt01/tt01.c | 2 +-
board/imx31_phycore/lowlevel_init.S | 2 +-
board/karo/tx25/lowlevel_init.S | 42 +-
board/logicpd/imx31_litekit/lowlevel_init.S | 2 +-
boards.cfg | 4 +-
drivers/i2c/mxc_i2c.c | 4 +-
drivers/usb/host/ehci-mx5.c | 3 +-
drivers/video/ipu_common.c | 12 +-
drivers/video/mxc_ipuv3_fb.c | 20 +
include/configs/ima3-mx53.h | 3 -
include/configs/mx28evk.h | 1 +
include/configs/mx31pdk.h | 10 +-
include/configs/mx51_efikamx.h | 2 -
include/configs/mx51evk.h | 3 +-
include/configs/mx53ard.h | 2 -
include/configs/mx53evk.h | 2 -
include/configs/mx53loco.h | 2 -
include/configs/mx53smd.h | 2 -
include/configs/mx6qarm2.h | 2 -
include/configs/mx6qsabre_common.h | 177 ++++++++
include/configs/mx6qsabreauto.h | 22 +
include/configs/mx6qsabrelite.h | 2 -
include/configs/mx6qsabresd.h | 27 ++
include/configs/vision2.h | 2 -
include/ipu_pixfmt.h | 1 +
60 files changed, 2277 insertions(+), 645 deletions(-)
rename board/freescale/{mx6qsabrelite/imximage.cfg =>
imx/ddr/mx6q_4x_mt41j128.cfg} (100%)
create mode 100644 board/freescale/mx6qsabreauto/Makefile
create mode 100644 board/freescale/mx6qsabreauto/imximage.cfg
create mode 100644 board/freescale/mx6qsabreauto/mx6qsabreauto.c
create mode 100644 board/freescale/mx6qsabresd/Makefile
create mode 100644 board/freescale/mx6qsabresd/mx6qsabresd.c
create mode 100644 include/configs/mx6qsabre_common.h
create mode 100644 include/configs/mx6qsabreauto.h
create mode 100644 include/configs/mx6qsabresd.h
Best regards,
Stefano
--
=====================================================================
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================
More information about the U-Boot
mailing list