No subject

sent.

But the function you mentioned detect that flash is not erased.

Are you using a 16bit port for data connection to the flash ?

First check i would do is an "erase" test.
 =

Try to erase some sectors with "erase" command, something like

# erase 40000 4ffff

Then dump the memory, (to be sure also with BDM eventually), to see
if it has really been erased.


Also, these are some settings i am using in my config, maybe they can =

be useful:

/*
 * Start addresses for the final memory configuration
 * (Set up by the startup code)
 * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
 */
#define CONFIG_SYS_SDRAM_BASE           0x00000000
#define CONFIG_SYS_SDRAM_SIZE           16              /* in MB */
#define CONFIG_SYS_FLASH_BASE           0xffc00000
#define CONFIG_SYS_TEXT_BASE            0xffc00000
#define CONFIG_SYS_MAX_FLASH_BANKS      1
#define CONFIG_SYS_MAX_FLASH_SECT       1024
#define CONFIG_SYS_FLASH_ERASE_TOUT     1000


/*
 * CFI FLASH driver setup
 */
#define CONFIG_SYS_FLASH_CFI
#define CONFIG_FLASH_CFI_DRIVER
#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE

...


Let us know if you find something.

Regards,
Angelo


~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~Disclaimer~~~~~~~=
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Information contained and transmitted by this e-mail is confidential and pr=
oprietary to iGATE and its affiliates and is intended for use only by the r=
ecipient. If you are not the intended recipient, you are hereby notified th=
at any dissemination, distribution, copying or use of this e-mail is strict=
ly prohibited and you are requested to delete this e-mail immediately and n=
otify the originator or mailadmin at igate.com <mailto:mailadmin at igate.com>. i=
GATE does not enter into any agreement with any party by e-mail. Any views =
expressed by an individual do not necessarily reflect the view of iGATE. iG=
ATE is not responsible for the consequences of any actions taken on the bas=
is of information provided, through this email. The contents of an attachme=
nt to this e-mail may contain software viruses, which could damage your own=
 computer system. While iGATE has taken every reasonable precaution to mini=
mise this risk, we cannot accept liability for any damage which you sustain=
 as a result of software viruses. You should carry out your own virus check=
s before opening an attachment. To know more about iGATE please visit www.i=
gate.com <http://www.igate.com>.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~=
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~