[U-Boot] [PATCH] powerpc/usb: fix bug of CPU hang when missing USB PHY clock

Shengzhou Liu Shengzhou.Liu at freescale.com
Thu Oct 18 04:40:23 CEST 2012


when missing USB PHY clock, u-boot will hang during USB
initialization when issuing "usb start". We should check
USBGP[PHY_CLK_VALID] bit to avoid CPU hanging in this case.

Signed-off-by: Shengzhou Liu <Shengzhou.Liu at freescale.com>
---
against master branch of upstream u-boot tree

 drivers/usb/host/ehci-fsl.c |   22 ++++++++++++++++------
 1 files changed, 16 insertions(+), 6 deletions(-)

diff --git a/drivers/usb/host/ehci-fsl.c b/drivers/usb/host/ehci-fsl.c
index 7b8f033..68abf11 100644
--- a/drivers/usb/host/ehci-fsl.c
+++ b/drivers/usb/host/ehci-fsl.c
@@ -30,6 +30,18 @@
 
 #include "ehci.h"
 
+/* Check USB PHY clock valid */
+static int usb_phy_clk_valid(struct usb_ehci *ehci)
+{
+	if ((!(in_be32(&ehci->control) & PHY_CLK_VALID)) &&
+			(!in_be32(&ehci->prictrl))) {
+		printf("USB PHY clock invalid!\n");
+		return 0;
+	} else {
+		return 1;
+	}
+}
+
 /*
  * Create the appropriate control structures to manage
  * a new EHCI host controller.
@@ -82,18 +94,16 @@ int ehci_hcd_init(int index, struct ehci_hccr **hccr, struct ehci_hcor **hcor)
 		udelay(1000); /* delay required for PHY Clk to appear */
 #endif
 		out_le32(&(*hcor)->or_portsc[0], PORT_PTS_UTMI);
+		setbits_be32(&ehci->control, USB_EN);
 	} else {
-#if defined(CONFIG_SYS_FSL_USB_INTERNAL_UTMI_PHY)
-		clrbits_be32(&ehci->control, UTMI_PHY_EN);
 		setbits_be32(&ehci->control, PHY_CLK_SEL_ULPI);
+		clrsetbits_be32(&ehci->control, UTMI_PHY_EN, USB_EN);
 		udelay(1000); /* delay required for PHY Clk to appear */
-#endif
+		if (!usb_phy_clk_valid(ehci))
+			return -EINVAL;
 		out_le32(&(*hcor)->or_portsc[0], PORT_PTS_ULPI);
 	}
 
-	/* Enable interface. */
-	setbits_be32(&ehci->control, USB_EN);
-
 	out_be32(&ehci->prictrl, 0x0000000c);
 	out_be32(&ehci->age_cnt_limit, 0x00000040);
 	out_be32(&ehci->sictrl, 0x00000001);
-- 
1.6.4




More information about the U-Boot mailing list