[U-Boot] please pull u-boot-samsung master
Albert ARIBAUD
albert.u.boot at aribaud.net
Sat Sep 1 13:48:09 CEST 2012
Hi Minkyu,
On Mon, 27 Aug 2012 13:24:11 +0900, Minkyu Kang <promsoft at gmail.com>
wrote:
> Dear Albert ARIBAUD,
>
> The following changes since commit
> 5f50310588e87f2ff501992564d1b05df71419f4:
>
> davinci, c6x: Always use C version of reset code (2012-08-25
> 13:40:03 +0200)
>
> are available in the git repository at:
>
> git://git.denx.de/u-boot-samsung master
>
> for you to fetch changes up to
> 76f60ac2246d433c6995041d1aaf9f5d4e59b941:
>
> arm:cache:trats: Enable PL310 L2 Cache Controller at TRATS Samsung
> board (2012-08-27 12:25:09 +0900)
>
> ----------------------------------------------------------------
> Donghwa Lee (9):
> video: support exynos fimd driver for various exynos series
> EXYNOS5: support exynos5 lcd clock control
> EXYNOS5: support display system register control
> EXYNOS5: support display port phy control function
> EXYNOS5: add display port base address
> video: support exynos display port drivers
> video: add dp_enabled variable in vidinfo structure
> video: exynos fb driver supports display port feature
> video: support exynos pwm backlight driver
>
> Jaehoon Chung (1):
> ARM: EXYNOS: fixed compiler warning message
>
> Rajeshwari Shinde (10):
> ARCH: SPL: Add parametric board initializer
> SMDK5250: SPL: Define parametric board initializer
> SMDK5250: Add smdk5250-uboot-spl.lds
> EXYNOS5: CLOCK: define additional clock registers for
> Exynos5250 Rev 1.0 EXYNOS5: CLOCK: Add clock support for Exynos5250
> Rev 1.0 Exynos5: DDR3: Add DDR3 memory setup for Exynos5250 Rev 1.0
> EXYNOS5: CLOCK: Modify MPLL clock out for Exynos5250 Rev 1.0
> EXYNOS5: CLOCK: Add BPLL support
> EXYNOS5 : Modify pinnumx settings as per Exynos5250 Rev 1.0
> Zhong Hongbo (1):
> arm/s5pxx: Fix get_timer_masked to get the time.
>
> Łukasz Majewski (3):
> arm:trats: loaduimage environment variable defied for TRATS
> target arm:exynos: Enable data cache at exynos based processors.
> arm:cache:trats: Enable PL310 L2 Cache Controller at TRATS
> Samsung board
>
> arch/arm/cpu/armv7/exynos/clock.c | 139 ++-
> arch/arm/cpu/armv7/exynos/pinmux.c | 22 +-
> arch/arm/cpu/armv7/exynos/power.c | 21 +
> arch/arm/cpu/armv7/exynos/soc.c | 8 +
> arch/arm/cpu/armv7/exynos/system.c | 18 +
> arch/arm/cpu/armv7/s5p-common/pwm.c | 2 +-
> arch/arm/cpu/armv7/s5p-common/timer.c | 20 +-
> arch/arm/include/asm/arch-exynos/clk.h | 1 +
> arch/arm/include/asm/arch-exynos/clock.h | 237 ++--
> arch/arm/include/asm/arch-exynos/cpu.h | 3 +
> arch/arm/include/asm/arch-exynos/dmc.h | 65 ++
> arch/arm/include/asm/arch-exynos/dp.h | 751 +++++++++++++
> arch/arm/include/asm/arch-exynos/dp_info.h | 214 ++++
> arch/arm/include/asm/arch-exynos/fb.h | 27 +-
> arch/arm/include/asm/arch-exynos/gpio.h | 7 +-
> arch/arm/include/asm/arch-exynos/power.h | 5 +
> arch/arm/include/asm/arch-exynos/pwm_backlight.h | 34 +
> arch/arm/include/asm/arch-exynos/spl.h | 97 ++
> board/samsung/smdk5250/Makefile | 3 +-
> board/samsung/smdk5250/clock_init.c | 714 +++++++++---
> board/samsung/smdk5250/clock_init.h | 149 +++
> board/samsung/smdk5250/dmc_common.c | 199 ++++
> board/samsung/smdk5250/dmc_init.c | 462 --------
> board/samsung/smdk5250/dmc_init_ddr3.c | 228 ++++
> board/samsung/smdk5250/setup.h | 763 +++++++------
> board/samsung/smdk5250/smdk5250-uboot-spl.lds | 66 ++
> board/samsung/smdk5250/smdk5250.c | 6 +-
> board/samsung/smdk5250/smdk5250_spl.c | 68 ++
> drivers/video/Makefile | 2 +
> drivers/video/exynos_dp.c | 925
> ++++++++++++++++ drivers/video/exynos_dp_lowlevel.c |
> 1291 ++++++++++++++++++++++
> drivers/video/exynos_dp_lowlevel.h | 80 ++
> drivers/video/exynos_fb.c | 5 +-
> drivers/video/exynos_fimd.c | 91 +-
> drivers/video/exynos_pwm_bl.c | 57 +
> include/configs/smdk5250.h | 7 +-
> include/configs/trats.h | 7 +-
> include/lcd.h | 1 + 38 files
> changed, 5730 insertions(+), 1065 deletions(-) create mode 100644
> arch/arm/include/asm/arch-exynos/dp.h create mode 100644
> arch/arm/include/asm/arch-exynos/dp_info.h create mode 100644
> arch/arm/include/asm/arch-exynos/pwm_backlight.h create mode 100644
> arch/arm/include/asm/arch-exynos/spl.h create mode 100644
> board/samsung/smdk5250/clock_init.h create mode 100644
> board/samsung/smdk5250/dmc_common.c delete mode 100644
> board/samsung/smdk5250/dmc_init.c create mode 100644
> board/samsung/smdk5250/dmc_init_ddr3.c create mode 100644
> board/samsung/smdk5250/smdk5250-uboot-spl.lds create mode 100644
> board/samsung/smdk5250/smdk5250_spl.c create mode 100644
> drivers/video/exynos_dp.c create mode 100644
> drivers/video/exynos_dp_lowlevel.c create mode 100644
> drivers/video/exynos_dp_lowlevel.h create mode 100644
> drivers/video/exynos_pwm_bl.c
>
Applied to u-boot-arm/master, thanks!
Amicalement,
--
Albert.
More information about the U-Boot
mailing list