September 2012 Archives by date
Starting: Sat Sep 1 00:16:02 CEST 2012
Ending: Sun Sep 30 22:09:50 CEST 2012
Messages: 3105
- [U-Boot] patman staging tree
Otavio Salvador
- [U-Boot] [PATCH] usb: do explicit unaligned accesses
Marek Vasut
- [U-Boot] [PATCH 0/6] stdio: Clean up
Marek Vasut
- [U-Boot] [PATCH 1/6] stdio: dm: Remove dead code in console.c
Marek Vasut
- [U-Boot] [PATCH 2/6] stdio: dm: Add accessors to stdio_devices[]
Marek Vasut
- [U-Boot] [PATCH 3/6] stdio: dm: Make stdio_devices[] local
Marek Vasut
- [U-Boot] [PATCH 4/6] stdio: dm: Add stdio_fd_to_name() call
Marek Vasut
- [U-Boot] [PATCH 5/6] stdio: dm: Use stdio_fd_to_name() call to localize stdio_names
Marek Vasut
- [U-Boot] [PATCH 6/6] stdio: dm: Optimize stdio_print_current_devices()
Marek Vasut
- [U-Boot] [PATCHv2] ARM: Add Altera SOCFPGA Cyclone5
Marek Vasut
- [U-Boot] [PATCH v3 0/9] This patchset updates boards based on the TAM3517 SOM.
Tom Rini
- [U-Boot] Please pull u-boot-staging/trini at ti.com
Tom Rini
- [U-Boot] [PATCHv2] ARM: Add Altera SOCFPGA Cyclone5
dinguyen at altera.com
- [U-Boot] [PATCH] MX28: SPI: Fix CTRL0 not being written at end of DMA transfer
Marek Vasut
- [U-Boot] [PATCH 1/2] MX28: SPI: Fix the DMA DCache race condition
Marek Vasut
- [U-Boot] [PATCH 2/2] MX28: SPI: Fix the DMA chaining
Marek Vasut
- [U-Boot] [PATCH] MX28: MMC: Avoid DMA DCache race condition
Marek Vasut
- [U-Boot] [U-BOOT][PATCH] mmc: support the revision check for eMMC4.5
Marek Vasut
- [U-Boot] pull request for u-boot-tegra/master
Albert ARIBAUD
- [U-Boot] [PATCH] MX28: SPI: Fix CTRL0 not being written at end of DMA transfer
Stefano Babic
- [U-Boot] [PATCH] usb: do explicit unaligned accesses
Albert ARIBAUD
- [U-Boot] [PATCH v3 1/2] mxc: Define architecture identifier
Stefano Babic
- [U-Boot] Please pull u-boot-staging/trini at ti.com
Albert ARIBAUD
- [U-Boot] [PATCH V2 1/1] mx31/mx35/mx51/mx53/mx6: add watchdog
Stefano Babic
- [U-Boot] [PATCH v1] MX: set a common place to share code for Freescale i.MX
Stefano Babic
- [U-Boot] [PATCH 3/7] mx35: Fix decode_pll
Stefano Babic
- [U-Boot] Commit 94e8652a664f01cffb1f0abb0b114261c03a234d breaks tnetv107x_evm?
Albert ARIBAUD
- [U-Boot] [PATCH 5/7] mx35: Fix clock dividers
Stefano Babic
- [U-Boot] [PATCH] dlmalloc: remove manual reloc alias warning
Wolfgang Denk
- [U-Boot] please pull u-boot-avr32/master
Wolfgang Denk
- [U-Boot] Pull request u-boot-blackfin.git (sf branch)
Wolfgang Denk
- [U-Boot] please pull u-boot-samsung master
Albert ARIBAUD
- [U-Boot] [PATCH] dlmalloc: remove manual reloc alias warning
Wolfgang Denk
- [U-Boot] Request pull: u-boot-sh
Wolfgang Denk
- [U-Boot] [PATCH 0/6] stdio: Clean up
Wolfgang Denk
- [U-Boot] [PATCH 1/4] mpc5xxx: add pci_mpc5xxx_init prototype to common header
Wolfgang Denk
- [U-Boot] [PATCH 2/4] mpc5xxx: add GPIO port configuration
Wolfgang Denk
- [U-Boot] [PATCH v2 3/4] mpc52xx: add common o2dnt and o2dnt2 support and configurations
Wolfgang Denk
- [U-Boot] [PATCH v2 4/4] mpc52xx: remove o2dnt board
Wolfgang Denk
- [U-Boot] [PATCH v5] Consolidate bootcount code into drivers/bootcount
Wolfgang Denk
- [U-Boot] [[Patch V2] mips: 01/16] add mips64 standalone support
Wolfgang Denk
- [U-Boot] [Patch V4 0/4] MIPS: add mips64 cpu support
Wolfgang Denk
- [U-Boot] [Patch V4 1/4] MIPS: Add support for MIPS64 cpus
Wolfgang Denk
- [U-Boot] Pull request: u-boot-staging
Anatolij Gustschin
- [U-Boot] [Patch V4 3/4] MIPS: add board qemu-mips64 support
Wolfgang Denk
- [U-Boot] [Patch V4 4/4] MIPS: add mips64 standalone support
Wolfgang Denk
- [U-Boot] [PATCH] Credits for MCF5249 initialization code
Wolfgang Denk
- [U-Boot] [GIT PULL] Pull request: u-boot-imx
Albert ARIBAUD
- [U-Boot] [PATCH] at91sam9263ek: remove unnecessary console_init_f
Andreas Bießmann
- [U-Boot] [PATCH] arm:at91-boards: remove console_init_f where unnecessary
Andreas Bießmann
- [U-Boot] [PATCH] arm: sam9g10/sam9m10g45: remove CONFIG_ARCH_CPU_INIT
Andreas Bießmann
- [U-Boot] Pull request u-boot-blackfin.git (sf branch)
Andreas Bießmann
- [U-Boot] [PATCH v2 1/2] Loop block device for sandbox
Pavel Herrmann
- [U-Boot] [PATCH 2/2] Use loop block device in sandbox board
Pavel Herrmann
- [U-Boot] [PATCH] dlmalloc: remove manual reloc alias warning
Andreas Bießmann
- [U-Boot] [PATCH 0/6] stdio: Clean up
Marek Vasut
- [U-Boot] [PATCH v3 1/5] at91: atmel_nand: extract HWECC initialization code into one function: atmel_hw_nand_init_param().
Andreas Bießmann
- [U-Boot] [PATCH 2/2] Use loop block device in sandbox board
Marek Vasut
- [U-Boot] [PATCH v3 2/5] at91: atmel_nand: remove unused variables.
Andreas Bießmann
- [U-Boot] [PATCH v3 3/5] at91: atmel_nand: Update driver to support Programmable Multibit ECC controller
Andreas Bießmann
- [U-Boot] [PATCH v3 4/5] at91: 9x5: change SMC config timing that both works for PMECC & non-PMECC.
Andreas Bießmann
- [U-Boot] [PATCH v3 5/5] at91: 9x5: Enable PMECC for 5series ek board.
Andreas Bießmann
- [U-Boot] [PULL] u-boot-usb/master
Marek Vasut
- [U-Boot] [PATCH] usb: do explicit unaligned accesses
Marek Vasut
- [U-Boot] Please pull u-boot-atmel/master
Andreas Bießmann
- [U-Boot] [ARM] [STATUS] u-boot-arm has been rebased on current u-boot/master
Albert ARIBAUD
- [U-Boot] [PATCH v1] MX: set a common place to share code for Freescale i.MX
Marek Vasut
- [U-Boot] Please pull u-boot-atmel/master
Albert ARIBAUD
- [U-Boot] [PATCH] usb: do explicit unaligned accesses
Marek Vasut
- [U-Boot] Please pull u-boot-atmel/master
Albert ARIBAUD
- [U-Boot] [PATCH] usb: do explicit unaligned accesses
Albert ARIBAUD
- [U-Boot] [PATCH 0/6] stdio: Clean up
Wolfgang Denk
- [U-Boot] Pull request: u-boot-arm/master
Albert ARIBAUD
- [U-Boot] [PATCH] usb: do explicit unaligned accesses
Wolfgang Denk
- [U-Boot] [PATCH 0/6] stdio: Clean up
Marek Vasut
- [U-Boot] while booting u-boot hang at "relocate_code(addr_sp, id, addr); "
Thirumalesha N
- [U-Boot] [PATCH] usb: do explicit unaligned accesses
Marek Vasut
- [U-Boot] while booting u-boot hang at "relocate_code(addr_sp, id, addr); "
Albert ARIBAUD
- [U-Boot] [PATCH 0/6] stdio: Clean up
Wolfgang Denk
- [U-Boot] [PATCH 0/6] stdio: Clean up
Marek Vasut
- [U-Boot] [PATCH 3/6] stdio: dm: Make stdio_devices[] local
Marek Vasut
- [U-Boot] [PATCH] mtd: nand: allow NAND_NO_SUBPAGE_WRITE to be set from driver
Stefano Babic
- [U-Boot] [PATCH] mtd: nand: allow NAND_NO_SUBPAGE_WRITE to be set from driver
Marek Vasut
- [U-Boot] Add a new protocol
Wolfgang Denk
- [U-Boot] Pull request: u-boot-arm/master
Wolfgang Denk
- [U-Boot] [PATCH v2 3/6] video: cfb_console: logo can be positioned via the splashpos variable
Anatolij Gustschin
- [U-Boot] Pull request: u-boot-staging
Wolfgang Denk
- [U-Boot] [PATCH 3/6] video: cfb_console: logo can be positioned via the splashpos variable
Anatolij Gustschin
- [U-Boot] [PATCH 3/6] stdio: dm: Make stdio_devices[] local
Andreas Bießmann
- [U-Boot] [PATCH 3/6] stdio: dm: Make stdio_devices[] local
Marek Vasut
- [U-Boot] Commit 94e8652a664f01cffb1f0abb0b114261c03a234d breaks tnetv107x_evm?
Stephen Warren
- [U-Boot] [PATCH] ARM: arm1176: Define arch_cpu_init() at the SoC level
Stephen Warren
- [U-Boot] [v3] arm: Fixed the offset for the no relocation.
Zhong Hongbo
- [U-Boot] [v3] arm: Fixed the offset for the no relocation.
Zhong Hongbo
- [U-Boot] [PATCH 3/6] stdio: dm: Make stdio_devices[] local
Wolfgang Denk
- [U-Boot] [PATCH V5 1/2] ext4fs ls load support
Wolfgang Denk
- [U-Boot] [PATCH v4 6/7] env: make "env default" selective, check and apply
Wolfgang Denk
- [U-Boot] [PATCH v4 0/7] env: handle special variables and selective env default
Wolfgang Denk
- [U-Boot] [PATCH v4 7/7] env: delete selected vars not present in imported env
Wolfgang Denk
- [U-Boot] [PATCH v2 1/5] pci: fix errant data types and corresponding access functions
Wolfgang Denk
- [U-Boot] [PATCH v2 2/5] [cosmetic] pci: clean up some whitespace and formatting
Wolfgang Denk
- [U-Boot] [PATCH v2 3/5] pci: minor cleanup of CONFIG_PCI_PNP usage
Wolfgang Denk
- [U-Boot] [PATCH v2 4/5] pci: update pci_ids.h with a few new entries
Wolfgang Denk
- [U-Boot] [PATCH v2 5/5] pci: add CONFIG_PCI_ENUM_ONLY for platforms that don't need PCI setup done
Wolfgang Denk
- [U-Boot] Redundant Env
Wolfgang Denk
- [U-Boot] [V2] disk/partition: Fix the depend for all the partitions file
Wolfgang Denk
- [U-Boot] [V2] disk/partition: Fix the depend for all the partitions file
Wolfgang Denk
- [U-Boot] [PATCH] hwconfig: Move HWCONFIG_BUFFER_SIZE into hwconfig.h
Wolfgang Denk
- [U-Boot] [PATCH 13/13] Blackfin: update license to Clear BSD license.
Wolfgang Denk
- [U-Boot] [PATCH 3/7] mx35: Fix decode_pll
stefano babic
- [U-Boot] [Patch V4 4/4] MIPS: add mips64 standalone support
Zhi-zhou Zhang
- [U-Boot] [Patch V4 1/4] MIPS: Add support for MIPS64 cpus
Zhi-zhou Zhang
- [U-Boot] [PATCH 01/13] Blackfin: BF60x: new processor header files
Wolfgang Denk
- [U-Boot] [PATCH 13/13] Blackfin: update license to Clear BSD license.
Wolfgang Denk
- [U-Boot] [Patch V4 4/4] MIPS: add mips64 standalone support
Wolfgang Denk
- [U-Boot] [Patch V4 1/4] MIPS: Add support for MIPS64 cpus
Wolfgang Denk
- [U-Boot] [PATCH 1/4] patman: fix end of changes detection
Wolfgang Denk
- [U-Boot] [PATCH 2/4] patman: don't pick changes while processing patches
Wolfgang Denk
- [U-Boot] [PATCH 3/4] patman: don't mess with changelog
Wolfgang Denk
- [U-Boot] [PATCH 4/4] patman: don't mess with signoffs
Wolfgang Denk
- [U-Boot] [PATCH] patman: Allow for changelog use in first version of a series
Wolfgang Denk
- [U-Boot] [PATCH v3] patman: Do not Cc addresses included in To list
Wolfgang Denk
- [U-Boot] [PATCH 2/2] patman: Do not sort changlog items order
Wolfgang Denk
- [U-Boot] [PULL] u-boot-usb/master
Wolfgang Denk
- [U-Boot] [PATCH] u-boot yaffs2: Fix compilation warnings
Wolfgang Denk
- [U-Boot] [PATCH 2/2] patman: Do not sort changlog items order
Fabio Estevam
- [U-Boot] [PATCH v2] ARM: Add X600 board support (SPEAr600 based)
Wolfgang Denk
- [U-Boot] [PATCH] mmc: Remove unused item flags in struct mmc_cmd
Wolfgang Denk
- [U-Boot] [PATCH v3 1/9] tools, config.mk: add binutils-version
Wolfgang Denk
- [U-Boot] [PATCH] part_mac: dcache: allocate cacheline-aligned buffers
Wolfgang Denk
- [U-Boot] [PATCH] ppc: Create a stack frame for wait_ticks()
Wolfgang Denk
- [U-Boot] [PATCH v2 1/9] FAT: cosmetic: Remove extra spaces
Wolfgang Denk
- [U-Boot] [PATCH v2 2/8] FAT: get_fatent: Fix FAT boundary check
Wolfgang Denk
- [U-Boot] [PATCH v2 3/8] FAT: cosmetic: Remove useless assignment
Wolfgang Denk
- [U-Boot] [PATCH v2 4/8] FAT: Fix redundant sector read
Wolfgang Denk
- [U-Boot] [PATCH v2 5/8] FAT: Fix file contents listed as directory
Wolfgang Denk
- [U-Boot] [PATCH v2 6/8] FAT: get_cluster: Add buffer bouncing
Wolfgang Denk
- [U-Boot] [PATCH v2 7/8] FAT: Simplify get_contents
Wolfgang Denk
- [U-Boot] [PATCH v2 8/8] FAT: Make it possible to read from any file position
Wolfgang Denk
- [U-Boot] [PATCH] md5: Export step-by-step API
Wolfgang Denk
- [U-Boot] [PATCH] rtc: pcf8563: Make century compatible with Linux
Wolfgang Denk
- [U-Boot] [PATCH 01/10] dm: arm: Remove support for lpc2292
Wolfgang Denk
- [U-Boot] [PATCH] image/FIT: Add ramdisk load, entry address and OS tag inclusion
Wolfgang Denk
- [U-Boot] [PATCH] env_nand: align NAND buffers
Wolfgang Denk
- [U-Boot] [PATCH] fix out of tree building with kallsyms
Wolfgang Denk
- [U-Boot] [PATCH] PPC temac phy probe unsigned int underflow fix.
Wolfgang Denk
- [U-Boot] [PATCH] input: key_matrix: fix header inclusion
Wolfgang Denk
- [U-Boot] [PATCH v2] README: Add handy kermit primer
Wolfgang Denk
- [U-Boot] [PATCH 01/14] dm: Initial import of design documents
Wolfgang Denk
- [U-Boot] [PATCH 02/14] dm: Add Driver cores design document
Wolfgang Denk
- [U-Boot] [PATCH 03/14] dm: Add GPIO API transition document
Wolfgang Denk
- [U-Boot] [PATCH 04/14] dm: Add MMC subsystem analysis
Wolfgang Denk
- [U-Boot] [PATCH 05/14] dm: Add networking subsystem analysis
Wolfgang Denk
- [U-Boot] [PATCH 06/14] dm: Add SPI API transition document
Wolfgang Denk
- [U-Boot] [PATCH 07/14] dm: Add block device document
Wolfgang Denk
- [U-Boot] [PATCH 08/14] dm: Add POWER API transition document
Wolfgang Denk
- [U-Boot] [PATCH 09/14] dm: Hwmon UDM subsystem analysis added.
Wolfgang Denk
- [U-Boot] [PATCH 10/14] dm: Driver model analysis document for Watchdog subsystem has been added.
Wolfgang Denk
- [U-Boot] [PATCH 11/14] dm: add PCI design document
Wolfgang Denk
- [U-Boot] [PATCH 12/14] dm: Add pcmcia design document
Wolfgang Denk
- [U-Boot] [PATCH 13/14] dm: RTC subsystem analysis added.
Wolfgang Denk
- [U-Boot] [PATCH 14/14] dm: Add twserial device document
Wolfgang Denk
- [U-Boot] [PATCH v4 0/7] env: handle special variables and selective env default
Marek Vasut
- [U-Boot] [PATCH 01/10] dm: arm: Remove support for lpc2292
Marek Vasut
- [U-Boot] [PATCH] mtest: Disable dcache during test
Wolfgang Denk
- [U-Boot] [PATCH 01/14] dm: Initial import of design documents
Vikram Narayanan
- [U-Boot] [PATCH 0/5] *** Qualcomm chipset support patches ***
Wolfgang Denk
- [U-Boot] [PATCH V5 1/2] ext4fs ls load support
Marek Vasut
- [U-Boot] [PATCH 01/14] dm: Initial import of design documents
Marek Vasut
- [U-Boot] [PATCH 1/5] MSM7630: USB Gadget support
Wolfgang Denk
- [U-Boot] [PATCH] README: Update ver env var description
Wolfgang Denk
- [U-Boot] [PATCH 1/1] lib, panic: don't call do_reset in SPL (debug).
Wolfgang Denk
- [U-Boot] [PATCH 1/2] README.SPL: Add a small Debugging section
Wolfgang Denk
- [U-Boot] [PATCH 2/2] README.SPL: Move the 'Estimating stack usage' from omap3 to here
Wolfgang Denk
- [U-Boot] [PATCH] README: Cleanup description of supported partitions.
Wolfgang Denk
- [U-Boot] [PATCH 1/3] disk: part_efi: parse and store partition UUID
Wolfgang Denk
- [U-Boot] [PATCH 1/3] hush: Add default value substitution support
Wolfgang Denk
- [U-Boot] [PATCH 2/3] hush: Don't parse the contents of a dereferenced var
Wolfgang Denk
- [U-Boot] [PATCH 3/3] hush: Include file and line number when reporting syntax errors
Wolfgang Denk
- [U-Boot] [PATCH 1/3] hush: Add default value substitution support
Wolfgang Denk
- [U-Boot] [PATCH] [RFC] powerpc: re-add bi_ip_addr to bd_t struct
Anatolij Gustschin
- [U-Boot] [PATCH] Add a memory get command
Wolfgang Denk
- [U-Boot] [PATCH 2/2] patman: Do not sort changlog items order
Wolfgang Denk
- [U-Boot] [PATCH 01/10] dm: arm: Remove support for lpc2292
Wolfgang Denk
- [U-Boot] [PATCH 01/14] dm: Initial import of design documents
Wolfgang Denk
- [U-Boot] [PATCH] [RFC] powerpc: re-add bi_ip_addr to bd_t struct
Wolfgang Denk
- [U-Boot] [PATCH] [RFC] powerpc: re-add bi_ip_addr to bd_t struct
Wolfgang Denk
- [U-Boot] [PATCH 01/10] dm: arm: Remove support for lpc2292
Marek Vasut
- [U-Boot] [PATCH V5 1/2] ext4fs ls load support
Rob Herring
- [U-Boot] [v3] arm: Fixed the offset for the no relocation.
Marek Vasut
- [U-Boot] How to manage RMOBILE patches?
Nobuhiro Iwamatsu
- [U-Boot] [PATCH 1/3] disk: part_efi: parse and store partition UUID
Stephen Warren
- [U-Boot] [PATCH v3 4/4] mmc: sdhci: increase the timeout and udelay value
Jaehoon Chung
- [U-Boot] [PATCHv1] ARM: Add Altera SOCFPGA Cyclone5
Chin Liang See
- [U-Boot] [PATCH v3 4/4] mmc: sdhci: increase the timeout and udelay value
Jaehoon Chung
- [U-Boot] [U-BOOT][PATCH] mmc: support the revision check for eMMC4.5
Jaehoon Chung
- [U-Boot] [PATCH v2] ARM: Add X600 board support (SPEAr600 based)
Stefan Roese
- [U-Boot] [PATCH v4 0/7] env: handle special variables and selective env default
Gerlando Falauto
- [U-Boot] [PATCH v4 7/7] env: delete selected vars not present in imported env
Gerlando Falauto
- [U-Boot] [PATCH 13/13] Blackfin: update license to Clear BSD license.
Wolfgang Denk
- [U-Boot] [PATCH 0/2] arm/km: configuration of the mv88e6352 switch on kmnusa
Prafulla Wadaskar
- [U-Boot] [PATCH] edminiv2: orion5x: fix GPIO inits and values
Prafulla Wadaskar
- [U-Boot] [PATCH] km/arm: set SPI NOR Flash default parameters
Prafulla Wadaskar
- [U-Boot] [PATCH v2] kw_spi: fix clock prescaler computation
Prafulla Wadaskar
- [U-Boot] [PATCH] km/ivm: fix string len check to support 7 char board names
Prafulla Wadaskar
- [U-Boot] [PATCH] arm/km: fix frequency of the SPI NOR Flash
Prafulla Wadaskar
- [U-Boot] [PATCH] arm/km: remove unused code
Prafulla Wadaskar
- [U-Boot] [PATCH v2] Cosmetic doc typo fixes to the kwbimage feature docs
Prafulla Wadaskar
- [U-Boot] [PATCH] cosmetic: Better explain how to use the kirkwood kwbimage.cfg file.
Prafulla Wadaskar
- [U-Boot] [PATCH] lsxl: support power switch
Prafulla Wadaskar
- [U-Boot] [PATCH] dm: net: Fixup the armada100 FEC driver
Prafulla Wadaskar
- [U-Boot] Pull request for u-boot-marvell.git
Prafulla Wadaskar
- [U-Boot] gpt: GUID/UUID - GPT restoration - open questions - RESEND
Lukasz Majewski
- [U-Boot] [PATCH 0/6] gpt: GUID Partition Table (GPT) restoration
Lukasz Majewski
- [U-Boot] [PATCH 1/2] cfi: Check for blank before erase
Stefan Roese
- [U-Boot] [PATCH 2/2] cfi: Make the flash erase and write operations abortable
Stefan Roese
- [U-Boot] [PATCH] ubifs: Fix memory leak in ubifs_finddir
Stefan Roese
- [U-Boot] [PATCH] ppc4xx: Canyonlands/Glacier: Squeeze NAND image a bit to fit again
Stefan Roese
- [U-Boot] Please pull u-boot-ppc4xx/master
Stefan Roese
- [U-Boot] Please pull u-boot-cfi-flash/master
Stefan Roese
- [U-Boot] Please pull u-boot-ubi/master
Stefan Roese
- [U-Boot] [PATCH] eb_cpux9k2: fix chip select
Jens Scharsig
- [U-Boot] [PATCH] eb_cpux9k2: add ram target configuration
Jens Scharsig
- [U-Boot] ARM Workflow: rebase on ARM repositories
Stefano Babic
- [U-Boot] ARM Workflow: rebase on ARM repositories
Stefan Roese
- [U-Boot] [PATCH v2 5/8] FAT: Fix file contents listed as directory
Benoît Thébaudeau
- [U-Boot] ARM Workflow: rebase on ARM repositories
Stefano Babic
- [U-Boot] [PATCH v2 8/8] FAT: Make it possible to read from any file position
Benoît Thébaudeau
- [U-Boot] [PATCH] mtest: Disable dcache during test
Benoît Thébaudeau
- [U-Boot] [PATCH] Add winbond W25Q64DW SPI flash support
402jagan at gmail.com
- [U-Boot] [PATCH] sf: winbond: Add support for W25Q64DW
402jagan at gmail.com
- [U-Boot] [PATCH 5/7] mx35: Fix clock dividers
Benoît Thébaudeau
- [U-Boot] [PATCH 5/7] mx35: Fix clock dividers
Stefano Babic
- [U-Boot] [PATCH v3 0/2] i2c:soft:multi: Support for multiple soft I2C buses at TRATS
Lukasz Majewski
- [U-Boot] [PATCH v3 1/2] i2c:soft:multi: Support for multiple soft I2C buses at Samsung boards
Lukasz Majewski
- [U-Boot] [PATCH v3 2/2] i2c:soft:multi: Enable soft I2C multibus at Trats development board
Lukasz Majewski
- [U-Boot] [PATCH] mx28evk: Convert to mxs_adjust_memory_params()
Fabio Estevam
- [U-Boot] [PATCH v2 1/2] Loop block device for sandbox
Marek Vasut
- [U-Boot] [PATCH] mtest: Disable dcache during test
Albert ARIBAUD
- [U-Boot] [PATCH] mx28evk: Convert to mxs_adjust_memory_params()
Stefano Babic
- [U-Boot] [PATCH v2 2/2] Use loop block device in sandbox board
Pavel Herrmann
- [U-Boot] [PATCH 2/2] Use loop block device in sandbox board
Pavel Herrmann
- [U-Boot] [PATCH v2 1/2] Loop block device for sandbox
Pavel Herrmann
- [U-Boot] ARM Workflow: rebase on ARM repositories
Albert ARIBAUD
- [U-Boot] cuImage doesn't boot with u-boot 2009.11 version
narayanasami vijayaraghavan
- [U-Boot] Pull request for u-boot-marvell.git
Albert ARIBAUD
- [U-Boot] ARM Workflow: rebase on ARM repositories
Wolfgang Denk
- [U-Boot] ARM Workflow: rebase on ARM repositories
Wolfgang Denk
- [U-Boot] How to manage RMOBILE patches?
Wolfgang Denk
- [U-Boot] Please pull u-boot-ppc4xx/master
Wolfgang Denk
- [U-Boot] Please pull u-boot-cfi-flash/master
Wolfgang Denk
- [U-Boot] Please pull u-boot-ubi/master
Wolfgang Denk
- [U-Boot] ARM Workflow: rebase on ARM repositories
Albert ARIBAUD
- [U-Boot] [PATCH] eb_cpux9k2: add ram target configuration
Andreas Bießmann
- [U-Boot] [PATCH v2 1/2] Loop block device for sandbox
Marek Vasut
- [U-Boot] [PATCH] eb_cpux9k2: fix chip select
Andreas Bießmann
- [U-Boot] ARM Workflow: rebase on ARM repositories
Wolfgang Denk
- [U-Boot] [PATCH] mtest: Disable dcache during test
Benoît Thébaudeau
- [U-Boot] Please pull u-boot-avr32/master
Andreas Bießmann
- [U-Boot] [PATCH] mtest: Disable dcache during test
Graeme Russ
- [U-Boot] [PATCH 0/7] [RFC] Driver model, take 1
Graeme Russ
- [U-Boot] [PATCH] Origen: Add default clock settings for multimedia IPs
Chander Kashyap
- [U-Boot] trouble with mmc on origen
Tushar Behera
- [U-Boot] [PATCH 0/7 V4] EXYNOS5: Enable SPI support
Rajeshwari Birje
- [U-Boot] [PATCH] mtest: Disable dcache during test
Wolfgang Denk
- [U-Boot] [PATCH] mtest: Disable dcache during test
Graeme Russ
- [U-Boot] [PATCH 0/7] [RFC] Driver model, take 1
Marek Vasut
- [U-Boot] [PATCH 0/7] [RFC] Driver model, take 1
Graeme Russ
- [U-Boot] [PATCH 0/7 V4] EXYNOS5: Enable SPI support
Minkyu Kang
- [U-Boot] [PATCH] mtest: Disable dcache during test
Wolfgang Denk
- [U-Boot] Please pull u-boot-avr32/master
Wolfgang Denk
- [U-Boot] [PATCH V2] atmel: eb_cpux9k2: add ram target configuration
Jens Scharsig (BuS Elektronik)
- [U-Boot] [PATCH v3 1/2] i2c:soft:multi: Support for multiple soft I2C buses at Samsung boards
Lukasz Majewski
- [U-Boot] [PATCH] eb_cpux9k2: add ram target configuration
Jens Scharsig
- [U-Boot] ARM Workflow: rebase on ARM repositories
Stefano Babic
- [U-Boot] [PATCH 0/7 V4] EXYNOS5: Enable SPI support
Rajeshwari Birje
- [U-Boot] [PATCH] mx28evk: Add USB Ethernet support
Stefano Babic
- [U-Boot] [PATCH] M28: Fix the use of gpmi-nand in mtdparts
Stefano Babic
- [U-Boot] [PATCH 1/2] MX28: Cleanup mxsboot within make mrproper
Stefano Babic
- [U-Boot] [PATCH 2/2] MX28: Fixup the ad-hoc use of DIGCTL_MICROSECONDS
Stefano Babic
- [U-Boot] [PATCH] SCSPS1: Enable caches
Stefano Babic
- [U-Boot] [PATCH v2 1/2] MX28: mx28evk: Align SSP clock speed
Stefano Babic
- [U-Boot] [PATCH v2 2/2] MX28: mx28evk: Enable SPI DMA
Stefano Babic
- [U-Boot] [PATCH] mx28evk: Convert to mxs_adjust_memory_params()
Stefano Babic
- [U-Boot] [PATCH 1/2] efikamx: refine USB support
Stefano Babic
- [U-Boot] [PATCH 2/2] efikamx: update and clean up configuration
Stefano Babic
- [U-Boot] Linking error while generating the U-boot build for MPC837XEMDS board
Brayan Pais
- [U-Boot] [PATCH] mmc: Add a quirk to add delay during completion of sdhci_send_cmd
Tushar Behera
- [U-Boot] [PATCH] mmc: Add a quirk to add delay during completion of sdhci_send_cmd
Tushar Behera
- [U-Boot] ARM Workflow: rebase on ARM repositories
Albert ARIBAUD
- [U-Boot] [v3] arm: Fixed the offset for the no relocation.
Zhong Hongbo
- [U-Boot] [V2] disk/partition: Fix the depend for all the partitions file
Zhong Hongbo
- [U-Boot] [V2] disk/partition: Fix the depend for all the partitions file
Zhong Hongbo
- [U-Boot] [Patch V5 0/4] add mips64 cpus support
Zhizhou Zhang
- [U-Boot] [Patch V5 1/4] MIPS: Don't use camel-case style
Zhizhou Zhang
- [U-Boot] [Patch V5 2/4] MIPS: change address related header files
Zhizhou Zhang
- [U-Boot] [Patch V5 3/4] MIPS: don't define CONFIG_SYS_TEXT_BASE in config.mk
Zhizhou Zhang
- [U-Boot] [Patch V5 4/4] MIPS: add board qemu-mips64 support
Zhizhou Zhang
- [U-Boot] ARM Workflow: rebase on ARM repositories
Stephen Warren
- [U-Boot] [v3] arm: Fixed the offset for the no relocation.
Stefano Babic
- [U-Boot] Please pull u-boot-staging/trini at ti.com
Tom Rini
- [U-Boot] [PATCH] hwconfig: Move HWCONFIG_BUFFER_SIZE into hwconfig.h
York Sun
- [U-Boot] How to manage RMOBILE patches?
Tom Rini
- [U-Boot] Please pull u-boot-staging/trini at ti.com
Albert ARIBAUD
- [U-Boot] ../net license for u-boot
Rob
- [U-Boot] [PATCH 1/2] arm: Adds board_postclk_init to the init_sequence.
Andreas Bießmann
- [U-Boot] [PATCH 1/2] arm: Adds board_postclk_init to the init_sequence.
Albert ARIBAUD
- [U-Boot] [PATCH 1/2] arm: Adds board_postclk_init to the init_sequence.
Andreas Bießmann
- [U-Boot] [PATCH V2] atmel: eb_cpux9k2: add ram target configuration
Andreas Bießmann
- [U-Boot] [PATCH 1/2] arm: Adds board_postclk_init to the init_sequence.
Albert ARIBAUD
- [U-Boot] [PATCH 1/2] arm: Adds board_postclk_init to the init_sequence.
Andreas Bießmann
- [U-Boot] [PATCH 2/2] Fixes the crippled console output on PortuxG20.
Andreas Bießmann
- [U-Boot] [PATCH v3 1/9] tools, config.mk: add binutils-version
Allen Martin
- [U-Boot] [PATCH v2 7/8] FAT: Simplify get_contents
Tom Rini
- [U-Boot] =?true?q?=5BPULL=5D=20Please=20pull=20u-boot-atmel/master?=
Andreas Bießmann
- [U-Boot] [PATCH 2/9] Fix strict-aliasing warning in dlmalloc
Andreas Bießmann
- [U-Boot] [PATCH] Fix strict-aliasing warning in dlmalloc
andreas.devel at googlemail.com
- [U-Boot] [PATCH v2] avr32: add atngw100mkii board
andreas.devel at googlemail.com
- [U-Boot] [PATCH] Fix strict-aliasing warning in dlmalloc
Andreas Bießmann
- [U-Boot] [PATCH] Add a memory get command
Wolfgang Denk
- [U-Boot] ../net license for u-boot
Wolfgang Denk
- [U-Boot] [PATCH v2 7/8] FAT: Simplify get_contents
Benoît Thébaudeau
- [U-Boot] [PATCH v2 7/8] FAT: Simplify get_contents
Wolfgang Denk
- [U-Boot] [PATCH v2 7/8] FAT: Simplify get_contents
Tom Rini
- [U-Boot] [Patch V4 1/4] MIPS: Add support for MIPS64 cpus
Daniel Schwierzeck
- [U-Boot] [Patch V5 2/4] MIPS: change address related header files
Daniel Schwierzeck
- [U-Boot] [Patch V5 4/4] MIPS: add board qemu-mips64 support
Daniel Schwierzeck
- [U-Boot] [PATCH v2 7/8] FAT: Simplify get_contents
Tom Rini
- [U-Boot] [PATCH v2 7/8] FAT: Simplify get_contents
Benoît Thébaudeau
- [U-Boot] [PATCH 0/4] USB multi controller
Stephen Warren
- [U-Boot] [Patch V5 4/4] MIPS: add board qemu-mips64 support
Daniel Schwierzeck
- [U-Boot] [PATCH v2 7/8] FAT: Simplify get_contents
Tom Rini
- [U-Boot] [PATCH 0/4] USB multi controller
Marek Vasut
- [U-Boot] Please pull u-boot-ti/master
Tom Rini
- [U-Boot] Pull request u-boot-blackfin.git (sf branch)
Bo Shen
- [U-Boot] How to manage RMOBILE patches?
Nobuhiro Iwamatsu
- [U-Boot] How to manage RMOBILE patches?
Nobuhiro Iwamatsu
- [U-Boot] [PATCH 0/4] USB multi controller
Lucas Stach
- [U-Boot] [PATCH 0/4] USB multi controller
Marek Vasut
- [U-Boot] [PATCH] fdt: Check if the FDT address is configured
Marek Vasut
- [U-Boot] [PULL] Please pull u-boot-atmel/master
Albert ARIBAUD
- [U-Boot] [PATCH v2] avr32: add atngw100mkii board
Hans-Christian Egtvedt
- [U-Boot] [PATCH V3 0/4] common/lcd cleanup
Igor Grinberg
- [U-Boot] [PATCH V3 0/4] common/lcd cleanup
Marek Vasut
- [U-Boot] [PATCH v2] MX: set a common place to share code for Freescale i.MX
Stefano Babic
- [U-Boot] [PATCH v2] MX: set a common place to share code for Freescale i.MX
Marek Vasut
- [U-Boot] [PATCH] gpio:fix: Proper handling of GPIO subsystem parts at Samsung devices
Lukasz Majewski
- [U-Boot] [PATCH v2 4/5] usb: ulpi: add indicator configuration function
Igor Grinberg
- [U-Boot] [PATCH v2 5/5] tegra20: add USB ULPI init code
Igor Grinberg
- [U-Boot] [PATCH V3 0/4] common/lcd cleanup
Anatolij Gustschin
- [U-Boot] [PATCH v2 4/5] usb: ulpi: add indicator configuration function
Marek Vasut
- [U-Boot] [RFC] [PATCH] PXE: FDT: Add support for fdt in PXE
Chander Kashyap
- [U-Boot] [PATCH] ubifs: Fix ubifsload when using ZLIB
Veli-Pekka Peltola
- [U-Boot] [PATCH v4 0/2] i2c:soft:multi: Support for multiple soft I2C buses at TRATS
Lukasz Majewski
- [U-Boot] [PATCH v4 1/2] i2c:soft:multi: Support for multiple soft I2C buses at Samsung boards
Lukasz Majewski
- [U-Boot] [PATCH v4 2/2] i2c:soft:multi: Enable soft I2C multibus at Trats development board
Lukasz Majewski
- [U-Boot] [PATCH] Atmel: sam9g10/9m10/9x5: Add support to boot DT kernel
Bo Shen
- [U-Boot] [PATCH v2] PXE: FDT: Add support for fdt in PXE
Chander Kashyap
- [U-Boot] [PATCH] Fix strict-aliasing warning in dlmalloc
Andreas Bießmann
- [U-Boot] [PATCH] Exynos5250: Enable PXE Support
Chander Kashyap
- [U-Boot] [PATCH 3/6] video: cfb_console: logo can be positioned via the splashpos variable
Bastian.Ruppert at sewerin.de
- [U-Boot] [PATCH v2 3/6] video: cfb_console: logo can be positioned via the splashpos variable
Bastian.Ruppert at sewerin.de
- [U-Boot] [PATCH v2 3/6] video: cfb_console: logo can be positioned via the splashpos variable
Anatolij Gustschin
- [U-Boot] [PATCH v3 1/2] Loop block device for sandbox
Pavel Herrmann
- [U-Boot] [PATCH v3 2/2] Use loop block device in sandbox board
Pavel Herrmann
- [U-Boot] How to manage RMOBILE patches?
Albert ARIBAUD
- [U-Boot] [PATCH v3 1/2] Loop block device for sandbox
Marek Vasut
- [U-Boot] [Patch V5 2/4] MIPS: change address related header files
Zhi-zhou Zhang
- [U-Boot] [Patch V5 4/4] MIPS: add board qemu-mips64 support
Zhi-zhou Zhang
- [U-Boot] [PATCH v3 1/2] Loop block device for sandbox
Pavel Herrmann
- [U-Boot] [PATCH v3 1/2] Loop block device for sandbox
Pavel Herrmann
- [U-Boot] [PATCH v3 1/2] Loop block device for sandbox
Marek Vasut
- [U-Boot] [PATCH v3 1/2] Loop block device for sandbox
Marek Vasut
- [U-Boot] [PATCH v2] PXE: FDT: Add support for fdt in PXE
Jason Hobbs
- [U-Boot] [PATCH v2] PXE: FDT: Add support for fdt in PXE
Chander Kashyap
- [U-Boot] How to manage RMOBILE patches?
Tom Rini
- [U-Boot] [PATCH] ubifs: Fix ubifsload when using ZLIB
Jamie Lentin
- [U-Boot] [v3] arm: Fixed the offset for the no relocation.
Zhong Hongbo
- [U-Boot] [PATCH v2] ubifs: Fix ubifsload when using ZLIB
Veli-Pekka Peltola
- [U-Boot] [PATCH v2 4/5] usb: ulpi: add indicator configuration function
Tom Warren
- [U-Boot] [Patch V5 4/4] MIPS: add board qemu-mips64 support
Daniel Schwierzeck
- [U-Boot] ima3-mx53:Rename CONFIG_PRIME => CONFIG_ETHPRME, remove unused macro CONFIG_DISCOVER_PHY
Ashok
- [U-Boot] [PATCH v4] kirkwood: add support for Iomega iConnect board
Luka Perkov
- [U-Boot] [PATCH] kirkwood: fix mpp.h coding style
Luka Perkov
- [U-Boot] [PATCH 0/4] USB multi controller
Stephen Warren
- [U-Boot] [v3] arm: Fixed the offset for the no relocation.
Stefano Babic
- [U-Boot] [PATCH 0/4] USB multi controller
Marek Vasut
- [U-Boot] [PATCH 1/6] gpt:doc: GPT (GUID Partition Table) documentation
Stephen Warren
- [U-Boot] [PATCH 2/6] gpt: Replace the leXX_to_int() calls with ones defined at <compiler.h>
Stephen Warren
- [U-Boot] [PATCH 3/6] gpt: Replacement of GPT structures members with ones indicating endianness and size
Stephen Warren
- [U-Boot] [PATCH 2/6] gpt: Replace the leXX_to_int() calls with ones defined at <compiler.h>
Stephen Warren
- [U-Boot] [PATCH 4/6] gpt: Support for GPT (GUID Partition Table) restoration
Stephen Warren
- [U-Boot] Pull request for u-boot-marvell.git
Simon Guinot
- [U-Boot] [PATCH 5/6] gpt: Support for new "gpt" command
Stephen Warren
- [U-Boot] [PATCH v2] MX: set a common place to share code for Freescale i.MX
Troy Kisky
- [U-Boot] [PATCH v2] MX: set a common place to share code for Freescale i.MX
Troy Kisky
- [U-Boot] [PATCH 4/6] gpt: Support for GPT (GUID Partition Table) restoration
Stephen Warren
- [U-Boot] gpt: GUID/UUID - GPT restoration - open questions
Stephen Warren
- [U-Boot] [PATCH v3 1/2] Loop block device for sandbox
Pavel Herrmann
- [U-Boot] Please pull u-boot-ti/master
Albert ARIBAUD
- [U-Boot] [PATCH v2 0/4] USB multi controller
Lucas Stach
- [U-Boot] [PATCH v2 1/4] usb: lowlevel interface change to support multiple controllers
Lucas Stach
- [U-Boot] [PATCH v2 2/4] usb: ehci: rework to take advantage of new lowlevel interface
Lucas Stach
- [U-Boot] [PATCH v2 3/4] usb: add support for multiple usb controllers
Lucas Stach
- [U-Boot] [PATCH v2 4/4] tegra20: port to new ehci interface
Lucas Stach
- [U-Boot] [PATCH V2 1/4] disk: part_efi: range-check partition number
Stephen Warren
- [U-Boot] [PATCH V2 2/4] disk: part_efi: parse and store partition UUID
Stephen Warren
- [U-Boot] [PATCH V2 3/4] disk: part_msdos: parse and store partition UUID
Stephen Warren
- [U-Boot] [PATCH V2 4/4] cmd_part: add partition-related command
Stephen Warren
- [U-Boot] [PATCH 0/4] USB multi controller
Lucas Stach
- [U-Boot] [PATCH 01/10] dm: arm: Remove support for lpc2292
Tom Rini
- [U-Boot] [PATCH v3 0/4] USB multi controller
Lucas Stach
- [U-Boot] [PATCH v3 1/4] usb: lowlevel interface change to support multiple controllers
Lucas Stach
- [U-Boot] [PATCH v3 2/4] usb: ehci: rework to take advantage of new lowlevel interface
Lucas Stach
- [U-Boot] [PATCH v3 3/4] usb: add support for multiple usb controllers
Lucas Stach
- [U-Boot] [PATCH v3 4/4] tegra20: port to new ehci interface
Lucas Stach
- [U-Boot] How to manage RMOBILE patches?
Nobuhiro Iwamatsu
- [U-Boot] [PATCH V2 2/4] disk: part_efi: parse and store partition UUID
Tom Rini
- [U-Boot] [PATCH 1/9] combine block device load commands into common function
Tom Rini
- [U-Boot] [PATCH 1/9] combine block device load commands into common function
Rob Herring
- [U-Boot] [PATCH v3 0/4] USB multi controller
Stephen Warren
- [U-Boot] [PATCH 1/9] combine block device load commands into common function
Tom Rini
- [U-Boot] [PATCH V2 4/4] cmd_part: add partition-related command
Rob Herring
- [U-Boot] [PATCH 3/9] disk/part: introduce get_device_and_partition
Tom Rini
- [U-Boot] [PATCH V2 4/4] cmd_part: add partition-related command
Tom Rini
- [U-Boot] [PATCH v2 4/5] usb: ulpi: add indicator configuration function
Lucas Stach
- [U-Boot] [PATCH] sh: ap_sh4a_4a: Fixed initialization value of DDR memory
Nobuhiro Iwamatsu
- [U-Boot] [PATCH v3 1/2] Loop block device for sandbox
Marek Vasut
- [U-Boot] Linking error while generating the U-boot build for MPC837XEMDS board
Kim Phillips
- [U-Boot] Pull request for u-boot-marvell.git
Prafulla Wadaskar
- [U-Boot] [PATCH] dm: net: Fixup the armada100 FEC driver
Joe Hershberger
- [U-Boot] [PATCH v2] usb: do explicit unaligned accesses
Marek Vasut
- [U-Boot] [PATCH v3 1/4] usb: lowlevel interface change to support multiple controllers
Marek Vasut
- [U-Boot] [PATCH v3 0/4] USB multi controller
Marek Vasut
- [U-Boot] [PATCH V2 4/4] cmd_part: add partition-related command
Stephen Warren
- [U-Boot] [PATCH 01/10] dm: arm: Remove support for lpc2292
Marek Vasut
- [U-Boot] [PATCH 01/13] Blackfin: BF60x: new processor header files
Bob Liu
- [U-Boot] [PATCH v3 2/9] arm: work around assembler bug
Marek Vasut
- [U-Boot] [PATCH 1/2] ARM: Remove apollon board
Marek Vasut
- [U-Boot] [PATCH 2/2] IPL: Remove remains of OneNAND IPL
Marek Vasut
- [U-Boot] [PATCH 1/2 V2] ARM: Remove apollon board
Marek Vasut
- [U-Boot] [PATCH] [U-BOOT] Zoom2: Ethernet: Enabling LAN9221 chip and CMD_NET.
Marek Vasut
- [U-Boot] [PATCH v4 1/2] i2c:soft:multi: Support for multiple soft I2C buses at Samsung boards
Heiko Schocher
- [U-Boot] [PATCH v4 2/2] i2c:soft:multi: Enable soft I2C multibus at Trats development board
Heiko Schocher
- [U-Boot] [PATCH 0/6] add zip command support for uboot
Marek Vasut
- [U-Boot] [PATCH 0/6] add zip command support for uboot
Lei Wen
- [U-Boot] [PATCH v3] PXE: FDT: Add support for fdt in PXE
Chander Kashyap
- [U-Boot] [PATCH v2] MX: set a common place to share code for Freescale i.MX
Stefano Babic
- [U-Boot] [PATCH v2] MX: set a common place to share code for Freescale i.MX
Marek Vasut
- [U-Boot] [PATCH v3] usb: do explicit unaligned accesses
Lucas Stach
- [U-Boot] [PATCH v3] usb: do explicit unaligned accesses
Marek Vasut
- [U-Boot] [PATCH v2] MX: set a common place to share code for Freescale i.MX
Stefano Babic
- [U-Boot] [PATCH v3 1/6] davinci: ea20: reorganisation LCD startup
Bastian Ruppert
- [U-Boot] [PATCH v3 2/6] davinci: ea20: the console is always set to the serial line
Bastian Ruppert
- [U-Boot] [PATCH v3 3/6] video: cfb_console: logo can be positioned via the splashpos variable
Bastian Ruppert
- [U-Boot] [PATCH v3 4/6] video: cfb_console: add function to plot the logo area black
Bastian Ruppert
- [U-Boot] [PATCH v3 5/6] da850/omap-l138: davinci_emac: Suppress auto negotiation if needed
Bastian Ruppert
- [U-Boot] [PATCH v3 6/6] davinci: ea20: add some configs and default environmet variables
Bastian Ruppert
- [U-Boot] [PATCH v3] MX: set a common place to share code for Freescale i.MX
Stefano Babic
- [U-Boot] [PATCH 0/6] add zip command support for uboot
Marek Vasut
- [U-Boot] [PATCH v2] MX: set a common place to share code for Freescale i.MX
Marek Vasut
- [U-Boot] [PATCH] MX35: mx35pdk: add support for MMC
Stefano Babic
- [U-Boot] Commit 67cbbf2... breaks some ARM builds
Albert ARIBAUD
- [U-Boot] [NEXT PATCH v1 0/7] In this patchset, a new i.MX35 board is added implementing
Stefano Babic
- [U-Boot] [NEXT PATCH v1 1/7] ARM: Fix start.S when used with SPL in arm1136
Stefano Babic
- [U-Boot] [NEXT PATCH v1 2/7] NAND: added NAND type to nand_ids
Stefano Babic
- [U-Boot] [NEXT PATCH v1 3/7] MX35: add LOW_LEVEL_SRAM_STACK to use SPL_FRAMEWORK
Stefano Babic
- [U-Boot] [NEXT PATCH v1 4/7] MX35: Add soc_boot_mode and soc_boot_device to MX35
Stefano Babic
- [U-Boot] [NEXT PATCH v1 5/7] SPL: Added MLO for mx35 SOC to SPL Makefile
Stefano Babic
- [U-Boot] [NEXT PATCH v1 6/7] ARM: Add MLO target to arm1136
Stefano Babic
- [U-Boot] [NEXT PATCH v1 7/7] MX35: add support for woodburn board
Stefano Babic
- [U-Boot] [PATCH v4 1/2] i2c:soft:multi: Support for multiple soft I2C buses at Samsung boards
Lukasz Majewski
- [U-Boot] [PATCH] at91sam9x5: set default EBI I/O drive configuration.
Josh Wu
- [U-Boot] [PATCH 0/6] add zip command support for uboot
Lukasz Majewski
- [U-Boot] Pull request for u-boot-marvell.git
Albert ARIBAUD
- [U-Boot] [PATCH v3 1/2] Loop block device for sandbox
Pavel Herrmann
- [U-Boot] [PATCH v3 1/2] Loop block device for sandbox
Marek Vasut
- [U-Boot] [PATCH 0/6] add zip command support for uboot
Marek Vasut
- [U-Boot] [PATCH v3 1/4] kirkwood: use c-struct for access to SDRAM addr decode registers
Holger Brunck
- [U-Boot] [PATCH 5/7] mx35: Fix clock dividers
Stefano Babic
- [U-Boot] [PATCH 4/7] mx35: Add definitions for clock gate values
Stefano Babic
- [U-Boot] [PATCH 5/7] mx35: Fix clock dividers
Stefano Babic
- [U-Boot] [PATCH] mx25: Define default SoC input clock frequencies
Stefano Babic
- [U-Boot] [PATCH 3/7] mx35: Fix decode_pll
Stefano Babic
- [U-Boot] [PATCH] Fix mx31_decode_pll
Stefano Babic
- [U-Boot] ima3-mx53:Rename CONFIG_PRIME => CONFIG_ETHPRME, remove unused macro CONFIG_DISCOVER_PHY
Stefano Babic
- [U-Boot] [PATCH v3 1/4] kirkwood: use c-struct for access to SDRAM addr decode registers
Marek Vasut
- [U-Boot] [PATCH 1/6] gpt:doc: GPT (GUID Partition Table) documentation
Lukasz Majewski
- [U-Boot] [PATCH v3 0/4] Board support and feature for LaCie devices
Simon Guinot
- [U-Boot] [PATCH v3 1/4] lacie_kw: add support for EFI partitions
Simon Guinot
- [U-Boot] [PATCH v3 2/4] ARM: add netspace_mini_v2 to mach-types.h
Simon Guinot
- [U-Boot] [PATCH v3 3/4] ARM: add support for Network Space v2 Lite and Mini
Simon Guinot
- [U-Boot] [PATCH v3 4/4] ARM: add support for d2 Network v2
Simon Guinot
- [U-Boot] [PATCH 2/6] gpt: Replace the leXX_to_int() calls with ones defined at <compiler.h>
Lukasz Majewski
- [U-Boot] [PATCH 2/6] gpt: Replace the leXX_to_int() calls with ones defined at <compiler.h>
Lukasz Majewski
- [U-Boot] [PATCH 3/6] gpt: Replacement of GPT structures members with ones indicating endianness and size
Lukasz Majewski
- [U-Boot] [PATCH 0/6] add zip command support for uboot
Lukasz Majewski
- [U-Boot] [PATCH 0/6] add zip command support for uboot
Marek Vasut
- [U-Boot] [PATCH 4/6] gpt: Support for GPT (GUID Partition Table) restoration
Lukasz Majewski
- [U-Boot] [PATCH v3 0/4] Board support and feature for LaCie devices
Simon Guinot
- [U-Boot] gpt: GUID/UUID - GPT restoration - open questions
Lukasz Majewski
- [U-Boot] [PATCH 2/2] MX28: SPI: Fix the DMA chaining
Stefano Babic
- [U-Boot] [PATCH] MX28: MMC: Avoid DMA DCache race condition
Stefano Babic
- [U-Boot] [PATCH 1/2] MX28: SPI: Fix the DMA DCache race condition
Stefano Babic
- [U-Boot] [PATCH] mx31: Define default SoC input clock frequencies
Stefano Babic
- [U-Boot] gpt: GUID/UUID - GPT restoration - open questions
Rob Herring
- [U-Boot] [PATCH v4 1/2] Loop block device for sandbox
Pavel Herrmann
- [U-Boot] [Patch V6 0/4] add mips64 cpus support
Zhizhou Zhang
- [U-Boot] [Patch V6 1/4] MIPS: don't use camel-case style
Zhizhou Zhang
- [U-Boot] [Patch V6 2/4] MIPS: change address related header files
Zhizhou Zhang
- [U-Boot] [Patch V6 3/4] MIPS: remove board/qemu-mips/config.mk
Zhizhou Zhang
- [U-Boot] [Patch V6 4/4] MIPS: add board qemu-mips64 support
Zhizhou Zhang
- [U-Boot] [PATCH 5/6] gpt: Support for new "gpt" command
Lukasz Majewski
- [U-Boot] gpt: GUID/UUID - GPT restoration - open questions
Lukasz Majewski
- [U-Boot] [PATCH v3 0/4] Board support and feature for LaCie devices
Albert ARIBAUD
- [U-Boot] [v3] arm: Fixed the offset for the no relocation.
Zhong Hongbo
- [U-Boot] [PATCH v3] PXE: FDT: Add support for fdt in PXE
Jason Hobbs
- [U-Boot] [PATCH 01/10] dm: arm: Remove support for lpc2292
Tom Rini
- [U-Boot] [PATCH 4/5] powerpc/85xx: Add P5040 processor support
Scott Wood
- [U-Boot] [PATCH V2 4/4] cmd_part: add partition-related command
Tom Rini
- [U-Boot] [PATCH 2/2] patman: Do not sort changlog items order
Otavio Salvador
- [U-Boot] [NEXT PATCH v1 5/7] SPL: Added MLO for mx35 SOC to SPL Makefile
Tom Rini
- [U-Boot] [PATCH v3 0/4] Board support and feature for LaCie devices
Prafulla Wadaskar
- [U-Boot] [PATCH V2 4/4] cmd_part: add partition-related command
Stephen Warren
- [U-Boot] [PATCH 2/6] gpt: Replace the leXX_to_int() calls with ones defined at <compiler.h>
Stephen Warren
- [U-Boot] [PATCH v3 3/6] video: cfb_console: logo can be positioned via the splashpos variable
Anatolij Gustschin
- [U-Boot] [PATCH 4/6] gpt: Support for GPT (GUID Partition Table) restoration
Stephen Warren
- [U-Boot] [PATCH v3 4/6] video: cfb_console: add function to plot the logo area black
Anatolij Gustschin
- [U-Boot] gpt: GUID/UUID - GPT restoration - open questions
Stephen Warren
- [U-Boot] How to manage RMOBILE patches?
Albert ARIBAUD
- [U-Boot] [NEXT PATCH v1 5/7] SPL: Added MLO for mx35 SOC to SPL Makefile
Stefano Babic
- [U-Boot] [PATCH] mmc: Remove incorrect cmd->flags usage
Andy Fleming
- [U-Boot] Please pull u-boot-mmc.git
Andy Fleming
- [U-Boot] msm7630 mainline request
Andy Fleming
- [U-Boot] [NEXT PATCH v1 5/7] SPL: Added MLO for mx35 SOC to SPL Makefile
Tom Rini
- [U-Boot] [PATCH 5/5] fix for MMC write issue
Andy Fleming
- [U-Boot] [PATCH v4 0/3] Board support and feature for LaCie devices
Simon Guinot
- [U-Boot] [PATCH v4 1/3] lacie_kw: add support for EFI partitions
Simon Guinot
- [U-Boot] [PATCH v4 2/3] ARM: add support for Network Space v2 Lite and Mini
Simon Guinot
- [U-Boot] [PATCH v4 3/3] ARM: add support for d2 Network v2
Simon Guinot
- [U-Boot] How to manage RMOBILE patches?
Tom Rini
- [U-Boot] [PATCH] Tegra: Change Tegra20 to Tegra in common code, prep for T30
Tom Warren
- [U-Boot] [NEXT PATCH v1 5/7] SPL: Added MLO for mx35 SOC to SPL Makefile
stefano babic
- [U-Boot] Specifying flash page sizes
Scott Wood
- [U-Boot] MIPS: 1Mb U-Boot?
Downey, David (c)
- [U-Boot] [PATCH V2 4/4] cmd_part: add partition-related command
Tom Rini
- [U-Boot] [PATCH v4 0/3] Board support and feature for LaCie devices
Prafulla Wadaskar
- [U-Boot] [PATCH] kirkwood: fix mpp.h coding style
Prafulla Wadaskar
- [U-Boot] cuImage doesn't boot with u-boot 2009.11 version
Scott Wood
- [U-Boot] [PATCH 01/10] dm: arm: Remove support for lpc2292
Marek Vasut
- [U-Boot] [PATCH v4 2/3] ARM: add support for Network Space v2 Lite and Mini
Prafulla Wadaskar
- [U-Boot] [NEXT PATCH v1 2/7] NAND: added NAND type to nand_ids
Scott Wood
- [U-Boot] [PATCH v3 3/4] kirkwood: implement kw_sdram_size_adjust
Prafulla Wadaskar
- [U-Boot] [PATCH] mmc: Remove incorrect cmd->flags usage
Marek Vasut
- [U-Boot] [PATCH v4 1/2] Loop block device for sandbox
Marek Vasut
- [U-Boot] [PATCH v2 4/5] usb: ulpi: add indicator configuration function
Marek Vasut
- [U-Boot] [PATCH] mmc: Remove incorrect cmd->flags usage
Marek Vasut
- [U-Boot] [PATCH] Tegra: Change Tegra20 to Tegra in common code, prep for T30
Stephen Warren
- [U-Boot] [PATCH] mpc85xx: make gpio_direction_output respect value
Chris Packham
- [U-Boot] [PATCH v3] PXE: FDT: Add support for fdt in PXE
Chander Kashyap
- [U-Boot] [PATCH 1/6] davinci: ea20: reorganisation LCD startup
Bastian.Ruppert at sewerin.de
- [U-Boot] [PATCH v4] PXE: FDT: Add support for fdt in PXE
Chander Kashyap
- [U-Boot] MIPS: 1Mb U-Boot?
Stefan Roese
- [U-Boot] gpt: GUID/UUID - GPT restoration - open questions
Lukasz Majewski
- [U-Boot] [PATCH v3 3/4] kirkwood: implement kw_sdram_size_adjust
Holger Brunck
- [U-Boot] [PATCH v2] ubifs: Fix ubifsload when using ZLIB
Andreas Bießmann
- [U-Boot] [PATCH v3 5/6] da850/omap-l138: davinci_emac: Suppress auto negotiation if needed
Prabhakar Lad
- [U-Boot] [NEXT PATCH v1 2/7] NAND: added NAND type to nand_ids
Stefano Babic
- [U-Boot] [PATCH v4 1/2] Loop block device for sandbox
Pavel Herrmann
- [U-Boot] [PATCH v4 1/2] Loop block device for sandbox
Marek Vasut
- [U-Boot] [PATCH v4 2/3] ARM: add support for Network Space v2 Lite and Mini
Simon Guinot
- [U-Boot] [PATCH v4 1/2] Loop block device for sandbox
Pavel Herrmann
- [U-Boot] [PATCH v4 1/2] Loop block device for sandbox
Marek Vasut
- [U-Boot] common, hush: bug (or feature?) with exit
Heiko Schocher
- [U-Boot] booting failed ( NAND read from offset 3c0000 failed -74 )
Manoj.J
- [U-Boot] [PATCH 1/2] mmc: at91: add multi block read/write support.
Josh Wu
- [U-Boot] [PATCH 2/2] ARM: at91sam9x5: enable MCI0 support for 9x5ek board.
Josh Wu
- [U-Boot] common, hush: bug (or feature?) with exit
Holger Brunck
- [U-Boot] common, hush: bug (or feature?) with exit
Heiko Schocher
- [U-Boot] Recent commit to env_nand.c causing saveenv to hang
Prabhakar Lad
- [U-Boot] [PATCH] powerpc mpc85xx: Synchronization Required for mmucsr0 spr
Laurent Joye
- [U-Boot] [PATCH] powerpc mpc85xx: Do not protect TLB entry for debuggging in AS1 against invalidation
Joye Laurent
- [U-Boot] [PATCH] powerpc mpc85xx: Synchronization Required for mmucsr0 spr
Joye Laurent
- [U-Boot] [Patch v2] powerpc/mpc8xxx: Move HWCONFIG_BUFFER_SIZE into config.h
York Sun
- [U-Boot] [NEXT PATCH v1 2/7] NAND: added NAND type to nand_ids
Stefano Babic
- [U-Boot] A little introduction
Henrik Nordström
- [U-Boot] Kernel boot halts with "Verifying Checksum ... Bad Data CRC"
Ellis Andrew
- [U-Boot] [PATCH v4 2/3] ARM: add support for Network Space v2 Lite and Mini
Prafulla Wadaskar
- [U-Boot] Recent commit to env_nand.c causing saveenv to hang
Stephen Warren
- [U-Boot] cuImage doesn't boot with u-boot 2009.11 version
narayanasami vijayaraghavan
- [U-Boot] cuImage doesn't boot with u-boot 2009.11 version
Scott Wood
- [U-Boot] [PATCH] Tegra: Change Tegra20 to Tegra in common code, prep for T30
Tom Warren
- [U-Boot] Recent commit to env_nand.c causing saveenv to hang
Prabhakar Lad
- [U-Boot] [PATCH v3 3/4] kirkwood: implement kw_sdram_size_adjust
Prafulla Wadaskar
- [U-Boot] How to manage RMOBILE patches?
Albert ARIBAUD
- [U-Boot] cuImage doesn't boot with u-boot 2009.11 version
narayanasami vijayaraghavan
- [U-Boot] [PATCH v4 1/6] nand: Try to align the default buffers
Tom Warren
- [U-Boot] Problem booting i.MX6 from parallel NOR flash
Carolyn Smith
- [U-Boot] [PATCH v4 1/6] nand: Try to align the default buffers
Marek Vasut
- [U-Boot] [PATCH v4 3/4] kirkwood: implement kw_sdram_size_adjust
Prafulla Wadaskar
- [U-Boot] [PATCH v4 4/4] arm/km: use kw_sdram_size_adjust to adjust SDRAM size
Prafulla Wadaskar
- [U-Boot] [PATCH v3 1/4] kirkwood: use c-struct for access to SDRAM addr decode registers
Prafulla Wadaskar
- [U-Boot] [PATCH] powerpc mpc85xx: Synchronization Required for mmucsr0 spr
Scott Wood
- [U-Boot] [PATCH v3 2/4] kirkwood: implement kw_sdram_bs_set()
Prafulla Wadaskar
- [U-Boot] [NEXT PATCH v1 2/7] NAND: added NAND type to nand_ids
Scott Wood
- [U-Boot] [PATCH v4] PXE: FDT: Add support for fdt in PXE
Jason Hobbs
- [U-Boot] [PATCH] env_nand: fix incorrect size parameter to ALLOC_CACHE_ALIGN_BUFFER
Stephen Warren
- [U-Boot] Recent commit to env_nand.c causing saveenv to hang
Stephen Warren
- [U-Boot] [PATCH] env_nand: fix incorrect size parameter to ALLOC_CACHE_ALIGN_BUFFER
Prabhakar Lad
- [U-Boot] [PATCH V2 4/4] cmd_part: add partition-related command
Stephen Warren
- [U-Boot] [PATCH] powerpc mpc85xx: Do not protect TLB entry for debuggging in AS1 against invalidation
Scott Wood
- [U-Boot] [PATCH v4 1/6] nand: Try to align the default buffers
Tom Warren
- [U-Boot] Help with boot from MMC2 for AM3359 board
Flavio Castro Alves Filho
- [U-Boot] [PATCH v4 0/6] tegra: Add NAND flash support
Tom Warren
- [U-Boot] [PATCH v4 0/6] tegra: Add NAND flash support
Simon Glass
- [U-Boot] [PATCH 1/2] ARM: tegra: remove redundant mkdirs from board Makefiles
Tom Warren
- [U-Boot] [PATCH 3/3] tegra: put eMMC environment into the boot sectors
Tom Warren
- [U-Boot] [PATCH 1/2] cmd_nand: dump: Align data and OOB buffers
Tom Warren
- [U-Boot] [PATCH v4 0/6] tegra: Add NAND flash support
Marek Vasut
- [U-Boot] [PATCH v4 1/6] nand: Try to align the default buffers
Marek Vasut
- [U-Boot] Remaining CONFIG_NEEDS_MANUAL_RELOC
Marek Vasut
- [U-Boot] Remaining CONFIG_NEEDS_MANUAL_RELOC
Andreas Bießmann
- [U-Boot] Remaining CONFIG_NEEDS_MANUAL_RELOC
Marek Vasut
- [PATCH] mx6qsabrelite:Use IMX_GPIO_NR Macro
Ashok Kumar Reddy
- [U-Boot] [PATCH] mx6qsabrelite:Use IMX_GPIO_NR Macro
Ashok
- [U-Boot] patman staging tree
Simon Glass
- [U-Boot] [PATCH v3 5/6] da850/omap-l138: davinci_emac: Suppress auto negotiation if needed
Tom Rini
- [U-Boot] Remaining CONFIG_NEEDS_MANUAL_RELOC
Daniel Schwierzeck
- [U-Boot] Remaining CONFIG_NEEDS_MANUAL_RELOC
Marek Vasut
- [U-Boot] How to manage RMOBILE patches?
Nobuhiro Iwamatsu
- [U-Boot] How to manage RMOBILE patches?
Nobuhiro Iwamatsu
- [U-Boot] [PATCH v3 5/6] da850/omap-l138: davinci_emac: Suppress auto negotiation if needed
Bastian.Ruppert at sewerin.de
- [U-Boot] Subject: [PATCH] Fix for bug in memory sizing code
Iwo Mergler
- [U-Boot] Pull request u-boot-blackfin.git (sf branch)
Bo Shen
- [U-Boot] Problem booting i.MX6 from parallel NOR flash
Dirk Behme
- [U-Boot] [PATCH 2/2] ARM: at91sam9x5: enable MCI0 support for 9x5ek board.
Bo Shen
- [U-Boot] ext2load inside api
Conzelmann, Dirk
- [U-Boot] [PATCH] powerpc mpc85xx: Only clear TSR:WIS in watchdog_reset.
Mark Marshall
- [U-Boot] [PATCH v2] ubifs: Fix ubifsload when using ZLIB
Stefan Roese
- [U-Boot] Please pull u-boot-ubi/master
Stefan Roese
- [U-Boot] [PATCH] atmel_nand: fix the U-Boot output information about nand flash with PMECC enable.
Josh Wu
- [U-Boot] About environment variables
Paolo Palmieri
- [U-Boot] [NEXT PATCH v1 2/7] NAND: added NAND type to nand_ids
Stefano Babic
- [U-Boot] [NEXT PATCH v1 5/7] SPL: Added MLO for mx35 SOC to SPL Makefile
Thomas Petazzoni
- [U-Boot] [NEXT PATCH v1 5/7] SPL: Added MLO for mx35 SOC to SPL Makefile
Stefano Babic
- [U-Boot] [NEXT PATCH v1 5/7] SPL: Added MLO for mx35 SOC to SPL Makefile
Tom Rini
- [U-Boot] [PATCH] NAND: MXS: include common.h first so cache.h is included in correct order
Tom Warren
- [U-Boot] [PATCH] NAND: MXS: include common.h first so cache.h is included in correct order
Simon Glass
- [U-Boot] [PATCH v3 5/6] da850/omap-l138: davinci_emac: Suppress auto negotiation if needed
Tom Rini
- [U-Boot] [PATCH] NAND: MXS: include common.h first so cache.h is included in correct order
Marek Vasut
- [U-Boot] Boot U-Boot from UBI volume
Vikram Narayanan
- [U-Boot] [PATCH 1/2] tegra: i2c: Enable I2C on PAZ00
Marc Dietrich
- [U-Boot] [PATCH 2/2] tegra: enable lp0 on paz00
Marc Dietrich
- [U-Boot] [PATCH 1/2] tegra: i2c: Enable I2C on PAZ00
Stephen Warren
- [U-Boot] [PATCH 2/2] tegra: enable lp0 on paz00
Stephen Warren
- [U-Boot] [PATCH 2/2] tegra: enable lp0 on paz00
Tom Warren
- [U-Boot] [PATCH 2/2] tegra: enable lp0 on paz00
Marc Dietrich
- [U-Boot] [PATCH 1/2] tegra: i2c: Enable I2C on PAZ00
Marc Dietrich
- [U-Boot] [PATCH] NAND: MXS: include common.h first so cache.h is included in correct order
Tom Warren
- [U-Boot] Boot U-Boot from UBI volume
Wolfgang Denk
- [U-Boot] [STATUS] Going on Sabbatical...
Wolfgang Denk
- [U-Boot] [PATCH 1/2] tegra: i2c: Enable I2C on PAZ00
Stephen Warren
- [U-Boot] Please pull u-boot-tegra/master into ARM/master
Tom Warren
- [U-Boot] [u-boot-release] [PATCH 4/5] powerpc/85xx: Add P5040 processor support
Kim Phillips
- [U-Boot] [NEXT PATCH v1 2/7] NAND: added NAND type to nand_ids
Scott Wood
- [U-Boot] [u-boot-release] [PATCH 4/5] powerpc/85xx: Add P5040 processor support
Tabi Timur-B04825
- [U-Boot] MIPS: 1Mb U-Boot?
David Downey
- [U-Boot] [Patch] make reset_cpu nonreturn.
Pavel Machek
- [U-Boot] [PATCHv2] ARM: Add Altera SOCFPGA Cyclone5
Pavel Machek
- [U-Boot] [PATCH] mx6qsabresd: Add basic support
Fabio Estevam
- [U-Boot] [PATCH v3 5/6] da850/omap-l138: davinci_emac: Suppress auto negotiation if needed
Prabhakar Lad
- [U-Boot] [PATCH] mx6qsabresd: Add basic support
stefano babic
- [U-Boot] [PATCH] NAND: MXS: include common.h first so cache.h is included in correct order
stefano babic
- [U-Boot] [PATCH v3 5/6] da850/omap-l138: davinci_emac: Suppress auto negotiation if needed
Bastian.Ruppert at sewerin.de
- [U-Boot] [PATCH] mx6qsabresd: Add basic support
Dirk Behme
- [U-Boot] [PATCHv2] ARM: Add Altera SOCFPGA Cyclone5
Stefan Roese
- [U-Boot] U-boot support for TMS320C6678 Texas Instruments processor
Mahendravarman rajarao
- [U-Boot] [PATCH 0/3] i2c for R-mobile
Tetsuyuki Kobayashi
- [U-Boot] [PATCH 1/3] i2c: sh_i2c.c: support iccl and icch extension
Tetsuyuki Kobayashi
- [U-Boot] [PATCH 2/3] i2c: sh_i2c.c: correct BUSY bit define in ICSR
Tetsuyuki Kobayashi
- [U-Boot] [PATCH 3/3] i2c: sh_i2c.c: adjust for SH73A0
Tetsuyuki Kobayashi
- [U-Boot] [PATCH] snowball: Clear UART RX FIFO
Ramesh Chandrasekaran
- [U-Boot] [PATCH] NAND: MXS: include common.h first so cache.h is included in correct order
Marek Vasut
- [U-Boot] [Patch] make reset_cpu nonreturn.
Marek Vasut
- [U-Boot] [PATCHv2] ARM: Add Altera SOCFPGA Cyclone5
Marek Vasut
- [U-Boot] [Question] [ARM] global data array defined in board.c linkage problem : overlapping with relocation sections
Sun Eric
- [U-Boot] [PATCH] NAND: MXS: include common.h first so cache.h is included in correct order
Stefano Babic
- [U-Boot] U-boot support for TMS320C6678 Texas Instruments processor
Detlev Zundel
- [U-Boot] Nand Flash Programing and Board Bring Up
Manukumar
- [U-Boot] Nand Flash Programing and Board Bring Up
Marek Vasut
- [U-Boot] [PATCH] mx6qsabresd: Add basic support
Eric Nelson
- [U-Boot] [PATCH] mx6qsabresd: Add basic support
Otavio Salvador
- [U-Boot] [u-boot-release] [PATCH 4/5] powerpc/85xx: Add P5040 processor support
Kim Phillips
- [U-Boot] [u-boot-release] [PATCH 4/5] powerpc/85xx: Add P5040 processor support
Timur Tabi
- [U-Boot] More problems booting an i.MX6 from NOR flash
Carolyn Smith
- [U-Boot] [PATCH 1/2] mx6q: Factor out common DDR3 init code
Fabio Estevam
- [U-Boot] [PATCH 2/2] mx6: Add basic support for mx6qsabresd board.
Fabio Estevam
- [U-Boot] [PATCH] mmc: Fix mmc_spi error on cmd->flags field
Marek Vasut
- [U-Boot] More problems booting an i.MX6 from NOR flash
Dirk Behme
- [U-Boot] [PATCH 1/2] bfin: Disable -fstack-usage
Marek Vasut
- [U-Boot] [PATCH 2/2] bfin: Fix warning in bfin_mac
Marek Vasut
- [U-Boot] [PATCH] Quietly ignore DHCP Option 28 (Broadcast Address)
Brian Rzycki
- [U-Boot] using initrd with U-boot on the imx28evk
Bill
- [U-Boot] [PATCH] mx6qsabresd: Add basic support
stefano babic
- [U-Boot] [PATCH V2 4/4] cmd_part: add partition-related command
Stephen Warren
- [U-Boot] A little introduction
Graeme Russ
- [U-Boot] [PATCH 2/3] i2c: sh_i2c.c: correct BUSY bit define in ICSR
Nobuhiro Iwamatsu
- [U-Boot] [PATCH 1/3] i2c: sh_i2c.c: support iccl and icch extension
Nobuhiro Iwamatsu
- [U-Boot] [PATCH 3/3] i2c: sh_i2c.c: adjust for SH73A0
Nobuhiro Iwamatsu
- [U-Boot] [PATCH 1/2] mx6q: Factor out common DDR3 init code
Liu Hui-R64343
- [U-Boot] [PATCH 1/2] mx6q: Factor out common DDR3 init code
Fabio Estevam
- [U-Boot] [PATCH 1/2] mx6q: Factor out common DDR3 init code
Fabio Estevam
- [U-Boot] [PATCH 1/2] bfin: Disable -fstack-usage
Mike Frysinger
- [U-Boot] [PATCH 2/2] bfin: Fix warning in bfin_mac
Mike Frysinger
- [U-Boot] Help Required [imx35pdk_u-boot]
Muhammad Usman
- [U-Boot] [PATCH V2 4/4] cmd_part: add partition-related command
Lukasz Majewski
- [U-Boot] [PATCH v4 1/2] i2c:soft:multi: Support for multiple soft I2C buses at Samsung boards
Lukasz Majewski
- [U-Boot] [PATCH v4 1/2] i2c:soft:multi: Support for multiple soft I2C buses at Samsung boards
Minkyu Kang
- [U-Boot] [PATCH 1/2] bfin: Disable -fstack-usage
Marek Vasut
- [U-Boot] [PATCH v2 0/9] i2c for R-mobile
Tetsuyuki Kobayashi
- [U-Boot] [PATCH v2 1/9] i2c: sh_i2c.c: support iccl and icch extension
Tetsuyuki Kobayashi
- [U-Boot] [PATCH v2 2/9] i2c: sh_i2c.c: correct BUSY bit define in ICSR
Tetsuyuki Kobayashi
- [U-Boot] [PATCH v2 3/9] i2c: sh_i2c.c: adjust for SH73A0
Tetsuyuki Kobayashi
- [U-Boot] [PATCH v2 4/9] i2c: sh_i2c.c: support I2C2, I2C3 and I2C4
Tetsuyuki Kobayashi
- [U-Boot] [PATCH v2 5/9] i2c: sh_i2c: enable i2c_probe
Tetsuyuki Kobayashi
- [U-Boot] [PATCH v2 6/9] i2c: sh_i2c.c: check error in i2c_read and i2c_write
Tetsuyuki Kobayashi
- [U-Boot] [PATCH v2 7/9] i2c: sh_i2c.c: remove unused function
Tetsuyuki Kobayashi
- [U-Boot] [PATCH v2 8/9] arm: rmobile: kzm9g: enable I2C1
Tetsuyuki Kobayashi
- [U-Boot] [PATCH v2 9/9] arm: rmobile: kzm9g: enable I2C2
Tetsuyuki Kobayashi
- [U-Boot] [PATCH 1/2] mx6q: Factor out common DDR3 init code
stefano babic
- [U-Boot] [RESEND PATCH v2 0/9] i2c for R-mobile
Tetsuyuki Kobayashi
- [U-Boot] [PATCH v2 1/9] i2c: sh_i2c.c: support iccl and icch extension
Tetsuyuki Kobayashi
- [U-Boot] [PATCH v2 2/9] i2c: sh_i2c.c: correct BUSY bit define in ICSR
Tetsuyuki Kobayashi
- [U-Boot] [PATCH v2 3/9] i2c: sh_i2c.c: adjust for SH73A0
Tetsuyuki Kobayashi
- [U-Boot] [PATCH v2 4/9] i2c: sh_i2c.c: support I2C2, I2C3 and I2C4
Tetsuyuki Kobayashi
- [U-Boot] [PATCH v2 5/9] i2c: sh_i2c: enable i2c_probe
Tetsuyuki Kobayashi
- [U-Boot] [PATCH v2 6/9] i2c: sh_i2c.c: check error in i2c_read and i2c_write
Tetsuyuki Kobayashi
- [U-Boot] [PATCH v2 7/9] i2c: sh_i2c.c: remove unused function
Tetsuyuki Kobayashi
- [U-Boot] [PATCH v2 8/9] arm: rmobile: kzm9g: enable I2C1
Tetsuyuki Kobayashi
- [U-Boot] [PATCH v2 9/9] arm: rmobile: kzm9g: enable I2C2
Tetsuyuki Kobayashi
- [U-Boot] [Patch] make reset_cpu nonreturn.
Pavel Machek
- [U-Boot] [PATCHv2] ARM: Add Altera SOCFPGA Cyclone5
Pavel Machek
- [U-Boot] [PATCH 2/2] bfin: Fix warning in bfin_mac
Marek Vasut
- [U-Boot] Code Structure and API functionality of U-Boot
chandan mohanty
- [U-Boot] Help Required [imx35pdk]
Muhammad Usman
- [U-Boot] Pull request - microblaze
Michal Simek
- [U-Boot] [PATCH 2/4 v2] net: Add driver for Zynq Gem IP
Michal Simek
- [U-Boot] [PATCH 1/4 v2] serial: Add Zynq serial driver
Michal Simek
- [U-Boot] [PATCH 2/2] ARM: at91sam9x5: enable MCI0 support for 9x5ek board.
Josh Wu
- [U-Boot] [PATCH 3/4 v2] arm: Support new Xilinx Zynq platform
Michal Simek
- [U-Boot] [PATCH 4/4 v3] xilinx: Add new Zynq board
Michal Simek
- [U-Boot] [PATCH 0/7] Add support to MINI2416 board
José Miguel Gonçalves
- [U-Boot] [PATCH 1/7] ARM: fix relocation on ARM926EJS
José Miguel Gonçalves
- [U-Boot] [PATCH 2/7] S3C24XX: Add core support for Samsung's S3C24XX SoCs
José Miguel Gonçalves
- [U-Boot] [PATCH 3/7] S3C24XX: Add serial driver
José Miguel Gonçalves
- [U-Boot] [PATCH 4/7] S3C24XX: Add RTC driver
José Miguel Gonçalves
- [U-Boot] [PATCH 5/7] S3C24XX: Add NAND Flash driver
José Miguel Gonçalves
- [U-Boot] [PATCH 6/7] Add u-boot-ubl.bin target to the Makefile
José Miguel Gonçalves
- [U-Boot] [PATCH 7/7] S3C24XX: Add support to MINI2416 board
José Miguel Gonçalves
- [U-Boot] [PATCH 2/2] bfin: Fix warning in bfin_mac
Joe Hershberger
- [U-Boot] [PATCH 2/6] gpt: Replace the leXX_to_int() calls with ones defined at <compiler.h>
Lukasz Majewski
- [U-Boot] [PATCH v2 0/7] gpt: GUID Partition Table (GPT) restoration
Lukasz Majewski
- [U-Boot] [PATCH v2 1/7] vsprintf:fix: Change type returned by ustrtoul
Lukasz Majewski
- [U-Boot] [PATCH v2 2/7] part:efi: Move part_efi.h file to ./include
Lukasz Majewski
- [U-Boot] [PATCH v2 3/7] gpt:doc: GPT (GUID Partition Table) documentation
Lukasz Majewski
- [U-Boot] [PATCH v2 4/7] gpt: The leXX_to_int() calls replaced with ones defined at <compiler.h>
Lukasz Majewski
- [U-Boot] [PATCH v2 5/7] gpt: Support for GPT (GUID Partition Table) restoration
Lukasz Majewski
- [U-Boot] [PATCH v2 6/7] gpt: Support for new "gpt" command
Lukasz Majewski
- [U-Boot] [PATCH v2 7/7] gpt: Enable support for GPT partition table restoration at Samsung's Trats
Lukasz Majewski
- [U-Boot] Next steps
Tom Rini
- [U-Boot] [PATCH v3 5/6] da850/omap-l138: davinci_emac: Suppress auto negotiation if needed
Tom Rini
- [U-Boot] [PATCH 2/2] bfin: Fix warning in bfin_mac
Mike Frysinger
- [U-Boot] Cache alignment warnings on Tegra (ARM)
Tom Warren
- [U-Boot] [PATCH v4] PXE: FDT: Add support for fdt in PXE
Tom Rini
- [U-Boot] [PATCH V2 4/4] cmd_part: add partition-related command
Tom Rini
- [U-Boot] [PATCH V2 4/4] cmd_part: add partition-related command
Tom Rini
- [U-Boot] Cache alignment warnings on Tegra (ARM)
Stephen Warren
- [U-Boot] [PATCHv2] ARM: Add Altera SOCFPGA Cyclone5
Tom Rini
- [U-Boot] [PATCHv2] ARM: Add Altera SOCFPGA Cyclone5
Tom Rini
- [U-Boot] [PATCH 1/2] bfin: Disable -fstack-usage
Tom Rini
- [U-Boot] [PATCH v2 6/7] gpt: Support for new "gpt" command
Tom Rini
- [U-Boot] [PATCH v2 5/7] gpt: Support for GPT (GUID Partition Table) restoration
Tom Rini
- [U-Boot] [PATCH v2 0/7] gpt: GUID Partition Table (GPT) restoration
Tom Rini
- [U-Boot] [PATCH 2/2] mx6: Add basic support for mx6qsabresd board.
Vikram Narayanan
- [U-Boot] [PATCH 2/2] mx6: Add basic support for mx6qsabresd board.
Fabio Estevam
- [U-Boot] A little introduction
Henrik Nordström
- [U-Boot] [PATCH 1/2] mx6q: Factor out common DDR3 init code
Fabio Estevam
- [U-Boot] [PATCH 3/7] S3C24XX: Add serial driver
Marek Vasut
- [U-Boot] [PATCH 4/7] S3C24XX: Add RTC driver
Marek Vasut
- [U-Boot] Code Structure and API functionality of U-Boot
Marek Vasut
- [U-Boot] Help Required [imx35pdk]
Marek Vasut
- [U-Boot] [PATCH 5/7] S3C24XX: Add NAND Flash driver
Marek Vasut
- [U-Boot] [PATCH 0/5] mpc8308rdb: improved hardware support
Ira W. Snyder
- [U-Boot] [PATCH 1/5] mpc8xxx_spi: fix SPI support on MPC8308RDB
Ira W. Snyder
- [U-Boot] [PATCH 2/5] mpc8308rdb: add support for Spansion SPI flash on header J8
Ira W. Snyder
- [U-Boot] [PATCH 3/5] spansion: add support for S25FL256S1
Ira W. Snyder
- [U-Boot] [PATCH 4/5] mpc8308rdb: add support for FIT images
Ira W. Snyder
- [U-Boot] [PATCH 5/5] mpc8308rdb: add support for eSDHC MMC controller
Ira W. Snyder
- [U-Boot] Help Required [imx35pdk]
stefano babic
- [U-Boot] [PATCH 1/2] mx6q: Factor out common DDR3 init code
stefano babic
- [U-Boot] [PATCH 0/9] Add basic Tegra30 (T30) support
Tom Warren
- [U-Boot] [PATCH 1/9] Tegra: T30: Add include files
Tom Warren
- [U-Boot] [PATCH 2/9] Tegra: T30: Add AVP (arm720t) files
Tom Warren
- [U-Boot] [PATCH 3/9] Tegra: T30: Add CPU (armv7) files
Tom Warren
- [U-Boot] [PATCH 4/9] Tegra: T30: Add common Tegra30 CPU files
Tom Warren
- [U-Boot] [PATCH 5/9] Tegra: DT: Add preliminary device tree files for T30 Cardhu
Tom Warren
- [U-Boot] [PATCH 6/9] Tegra30: Add Cardhu board files
Tom Warren
- [U-Boot] [PATCH 7/9] Tegra30: Add config files (common and Cardhu)
Tom Warren
- [U-Boot] [PATCH 8/9] Tegra30: Add common pinmux config in board_early_init_f
Tom Warren
- [U-Boot] [PATCH 9/9] Tegra30: Enable Cardhu build (SPL)
Tom Warren
- [U-Boot] using initrd with U-boot on the imx28evk
Marek Vasut
- [U-Boot] Kernel boot halts with "Verifying Checksum ... Bad Data CRC"
Marek Vasut
- [U-Boot] Cache alignment warnings on Tegra (ARM)
Marek Vasut
- [U-Boot] [PATCH V5 1/2] ext4fs ls load support
Tom Rini
- [U-Boot] [PATCH V5 1/2] ext4fs ls load support
Rob Herring
- [U-Boot] Cache alignment warnings on Tegra (ARM)
Stephen Warren
- [U-Boot] [PATCH 5/7] S3C24XX: Add NAND Flash driver
José Miguel Gonçalves
- [U-Boot] Pull request: u-boot-mips/master
Daniel Schwierzeck
- [U-Boot] [PATCH 5/7] S3C24XX: Add NAND Flash driver
Scott Wood
- [U-Boot] using initrd with U-boot on the imx28evk
Bill
- [U-Boot] [PATCH 4/7] S3C24XX: Add RTC driver
José Miguel Gonçalves
- [U-Boot] Cache alignment warnings on Tegra (ARM)
Marek Vasut
- [U-Boot] Pull request: u-boot-mips/master
Tom Rini
- [U-Boot] using initrd with U-boot on the imx28evk
Marek Vasut
- [U-Boot] [PATCH 5/7] S3C24XX: Add NAND Flash driver
Marek Vasut
- [U-Boot] [PATCH 5/7] S3C24XX: Add NAND Flash driver
José Miguel Gonçalves
- [U-Boot] [PATCH 5/7] S3C24XX: Add NAND Flash driver
José Miguel Gonçalves
- [U-Boot] [PATCH 5/7] S3C24XX: Add NAND Flash driver
Marek Vasut
- [U-Boot] [PATCH 5/7] S3C24XX: Add NAND Flash driver
José Miguel Gonçalves
- [U-Boot] [PATCH 5/7] S3C24XX: Add NAND Flash driver
Marek Vasut
- [U-Boot] [PATCH V5 1/2] ext4fs ls load support
Tom Rini
- [U-Boot] [PATCH 3/7] S3C24XX: Add serial driver
José Miguel Gonçalves
- [U-Boot] [PATCH 1/2] libfdt: Add support for appending the values to a existing property
Jerry Van Baren
- [U-Boot] [PATCH] fdt: Check if the FDT address is configured
Jerry Van Baren
- [U-Boot] Help Required [imx35pdk]
Fabio Estevam
- [U-Boot] [PATCH 1/2] mx6q: Factor out common DDR3 init code
Fabio Estevam
- [U-Boot] [PATCH v2 4/9] i2c: sh_i2c.c: support I2C2, I2C3 and I2C4
Nobuhiro Iwamatsu
- [U-Boot] [PATCH v2 5/9] i2c: sh_i2c: enable i2c_probe
Nobuhiro Iwamatsu
- [U-Boot] [PATCH v2 1/9] i2c: sh_i2c.c: support iccl and icch extension
Nobuhiro Iwamatsu
- [U-Boot] [PATCH v2 6/9] i2c: sh_i2c.c: check error in i2c_read and i2c_write
Nobuhiro Iwamatsu
- [U-Boot] [PATCH v2 7/9] i2c: sh_i2c.c: remove unused function
Nobuhiro Iwamatsu
- [U-Boot] [PATCH v2 8/9] arm: rmobile: kzm9g: enable I2C1
Nobuhiro Iwamatsu
- [U-Boot] [RESEND PATCH v2 0/9] i2c for R-mobile
Nobuhiro Iwamatsu
- [U-Boot] [PATCH v2 9/9] arm: rmobile: kzm9g: enable I2C2
Nobuhiro Iwamatsu
- [U-Boot] [PATCH 0/9 V2] EXYNOS5: Add Audio support
Rajeshwari Birje
- [U-Boot] Help Required [imx35pdk]
Muhammad Usman
- [U-Boot] Help Required [imx35pdk]
Muhammad Usman
- [U-Boot] [PATCH v2 0/7] gpt: GUID Partition Table (GPT) restoration
Lukasz Majewski
- [U-Boot] Pull request for ARM zynq
Michal Simek
- [U-Boot] [PATCHv2] ARM: Add Altera SOCFPGA Cyclone5
Stefan Roese
- [U-Boot] [RESEND PATCH v2 0/9] i2c for R-mobile
Tetsuyuki Kobayashi
- [U-Boot] [PATCH 0/6] Exynos: Support for display drivers
Piotr Wilczek
- [U-Boot] [PATCH 1/6] misc:max8998 Add LDO macros
Piotr Wilczek
- [U-Boot] [PATCH 2/6] drivers: video: Add ld9040 video driver
Piotr Wilczek
- [U-Boot] [PATCH 3/6] arm: exynos4: Fix exynos4_fb structure
Piotr Wilczek
- [U-Boot] [PATCH 4/6] arm: exynos4: cpu: Add definition for display
Piotr Wilczek
- [U-Boot] [PATCH 5/6] drivers: video: fix image position
Piotr Wilczek
- [U-Boot] [PATCH 6/6] arm: exynos4: universal_C210: add display support
Piotr Wilczek
- [U-Boot] Help Required [imx35pdk]
stefano babic
- [U-Boot] How to understand the code flow of u-boot
Manoj.J
- [U-Boot] [PATCH 1/2] mx6q: Factor out common DDR3 init code
stefano babic
- [U-Boot] [PATCH v3 0/7] gpt: GUID Partition Table (GPT) restoration
Lukasz Majewski
- [U-Boot] [PATCH v3 1/7] vsprintf:fix: Change type returned by ustrtoul
Lukasz Majewski
- [U-Boot] [PATCH v3 2/7] part:efi: Move part_efi.h file to ./include
Lukasz Majewski
- [U-Boot] [PATCH v3 3/7] gpt:doc: GPT (GUID Partition Table) documentation
Lukasz Majewski
- [U-Boot] [PATCH v3 4/7] gpt: The leXX_to_int() calls replaced with ones defined at <compiler.h>
Lukasz Majewski
- [U-Boot] [PATCH v3 5/7] gpt: Support for GPT (GUID Partition Table) restoration
Lukasz Majewski
- [U-Boot] [PATCH v3 6/7] gpt: Support for new "gpt" command
Lukasz Majewski
- [U-Boot] [PATCH v3 7/7] gpt: Enable support for GPT partition table restoration at Samsung's Trats
Lukasz Majewski
- [U-Boot] [PATCH] driver/mtd:IFC NAND:Initialise internal SRAM before any write
Prabhakar Kushwaha
- [U-Boot] [PATCH] fdt: Check if the FDT address is configured
Marek Vasut
- [U-Boot] [PATCH 3/7] S3C24XX: Add serial driver
Marek Vasut
- [U-Boot] [PATCH V5 1/2] ext4fs ls load support
Marek Vasut
- [U-Boot] [PATCH 1/4 v2] serial: Add Zynq serial driver
Marek Vasut
- [U-Boot] [PATCH 2/4 v2] net: Add driver for Zynq Gem IP
Marek Vasut
- [U-Boot] [PATCH 3/7] S3C24XX: Add serial driver
José Miguel Gonçalves
- [U-Boot] [PATCH 3/4 v2] arm: Support new Xilinx Zynq platform
Marek Vasut
- [U-Boot] [PATCH 3/4 v2] arm: Support new Xilinx Zynq platform
Marek Vasut
- [U-Boot] [PATCH 4/4 v3] xilinx: Add new Zynq board
Marek Vasut
- [U-Boot] [PATCH 3/4 v2] arm: Support new Xilinx Zynq platform
Michal Simek
- [U-Boot] [PATCH 1/4 v2] serial: Add Zynq serial driver
Michal Simek
- [U-Boot] [PATCH 3/4 v2] arm: Support new Xilinx Zynq platform
Michal Simek
- [U-Boot] [PATCH 4/4 v3] xilinx: Add new Zynq board
Michal Simek
- [U-Boot] [PATCH 2/4 v2] net: Add driver for Zynq Gem IP
Michal Simek
- [U-Boot] [PATCH 3/4 v2] arm: Support new Xilinx Zynq platform
Marek Vasut
- [U-Boot] [PATCH 1/2] mmc: at91: add multi block read/write support.
Andreas Bießmann
- [U-Boot] [PATCH 2/2] ARM: at91sam9x5: enable MCI0 support for 9x5ek board.
Andreas Bießmann
- [U-Boot] [PATCH 3/4 v2] arm: Support new Xilinx Zynq platform
Michal Simek
- [U-Boot] [PULL] Please pull u-boot-avr32/master
Andreas Bießmann
- [U-Boot] Pull request u-boot-blackfin.git (sf branch)
Andreas Bießmann
- [U-Boot] [PATCH 4/4 v3] xilinx: Add new Zynq board
Michal Simek
- [U-Boot] [PATCH v2] avr32: add atngw100mkii board
Andreas Bießmann
- [U-Boot] [PATCH] Fix strict-aliasing warning in dlmalloc
Andreas Bießmann
- [U-Boot] [PATCH 2/4 v2] net: Add driver for Zynq Gem IP
Marek Vasut
- [U-Boot] [PATCH 4/4 v3] xilinx: Add new Zynq board
Marek Vasut
- [U-Boot] [PATCH 3/4 v2] arm: Support new Xilinx Zynq platform
Marek Vasut
- [U-Boot] [PATCH 1/4 v2] serial: Add Zynq serial driver
Marek Vasut
- [U-Boot] [PATCH] atmel_nand: fix the U-Boot output information about nand flash with PMECC enable.
Andreas Bießmann
- [U-Boot] [PATCH] at91sam9x5: set default EBI I/O drive configuration.
Andreas Bießmann
- [U-Boot] Next steps
Andreas Bießmann
- [U-Boot] [PATCH 3/4 v2] arm: Support new Xilinx Zynq platform
Michal Simek
- [U-Boot] [PATCH 3/4 v2] arm: Support new Xilinx Zynq platform
Marek Vasut
- [U-Boot] [PATCH v2] ARM: Add X600 board support (SPEAr600 based)
Stefan Roese
- [U-Boot] [PATCH v2 1/2] mx6q: Factor out common DDR3 init code
Fabio Estevam
- [U-Boot] [PATCH v2 2/2] mx6: Add basic support for mx6qsabresd board.
Fabio Estevam
- [U-Boot] Pull request: u-boot-mips/master
Daniel Schwierzeck
- [U-Boot] [PATCH] gpio:fix: Proper handling of GPIO subsystem parts at Samsung devices
Lukasz Majewski
- [U-Boot] [PATCH 1/4 v2] serial: Add Zynq serial driver
Michal Simek
- [U-Boot] [PATCH 1/4 v2] serial: Add Zynq serial driver
Marek Vasut
- [U-Boot] [PATCH V5 1/2] ext4fs ls load support
Tom Rini
- [U-Boot] using initrd with U-boot on the imx28evk
Bill
- [U-Boot] Pull request: u-boot-mips/master
Tom Rini
- [U-Boot] [PATCH v2] ARM: Add X600 board support (SPEAr600 based)
Tom Rini
- [U-Boot] [PATCH] USB: musb_udc: Bugfix musb_peri_rx_ep
Tom Rini
- [U-Boot] Next steps
Tom Rini
- [U-Boot] [PATCH] fdt: Check if the FDT address is configured
Tom Rini
- [U-Boot] [PATCH v2 0/7] gpt: GUID Partition Table (GPT) restoration
Tom Rini
- [U-Boot] [PATCH 9/9] Tegra30: Enable Cardhu build (SPL)
Tom Rini
- [U-Boot] [PATCH 1/9] Tegra: T30: Add include files
Tom Rini
- [U-Boot] [PATCH 0/9] Add basic Tegra30 (T30) support
Stephen Warren
- [U-Boot] [PATCH v3 2/7] part:efi: Move part_efi.h file to ./include
Kim Phillips
- [U-Boot] [PATCH] USB: musb_udc: Bugfix musb_peri_rx_ep
Kim Phillips
- [U-Boot] [PATCH] USB: musb_udc: Bugfix musb_peri_rx_ep
Tom Rini
- [U-Boot] [PATCH 1/9] Tegra: T30: Add include files
Stephen Warren
- [U-Boot] [PATCH v2] USB: musb_udc: Make musb_peri_rx_ep check for MUSB_RXCSR_RXPKTRDY
Tom Rini
- [U-Boot] [PATCH 2/9] Tegra: T30: Add AVP (arm720t) files
Stephen Warren
- [U-Boot] [PATCH 9/9] Tegra30: Enable Cardhu build (SPL)
Tom Warren
- [U-Boot] [PATCH 3/9] Tegra: T30: Add CPU (armv7) files
Stephen Warren
- [U-Boot] [PATCH 10/12] env: acl: Add environment variable access control list
Wolfgang Denk
- [U-Boot] [PATCH 3/9] Tegra: T30: Add CPU (armv7) files
Tom Warren
- [U-Boot] [PATCH 3/9] Tegra: T30: Add CPU (armv7) files
Stephen Warren
- [U-Boot] [PATCH 3/9] Tegra: T30: Add CPU (armv7) files
Tom Rini
- [U-Boot] [PATCH 1/9] Tegra: T30: Add include files
Tom Warren
- [U-Boot] [PATCH 2/9] Tegra: T30: Add AVP (arm720t) files
Tom Warren
- [U-Boot] [PATCH 0/9] Add basic Tegra30 (T30) support
Tom Rini
- [U-Boot] [PATCH 1/9] Tegra: T30: Add include files
Tom Warren
- [U-Boot] [PATCH 3/9] Tegra: T30: Add CPU (armv7) files
Tom Warren
- [U-Boot] [PATCH 0/9] Add basic Tegra30 (T30) support
Tom Warren
- [U-Boot] [PATCH 2/9] Tegra: T30: Add AVP (arm720t) files
Lucas Stach
- [U-Boot] [PATCH 3/9] Tegra: T30: Add CPU (armv7) files
Tom Rini
- [U-Boot] [PATCH 2/9] Tegra: T30: Add AVP (arm720t) files
Tom Warren
- [U-Boot] [PATCH 4/9] Tegra: T30: Add common Tegra30 CPU files
Stephen Warren
- [U-Boot] [PATCH 5/9] Tegra: DT: Add preliminary device tree files for T30 Cardhu
Stephen Warren
- [U-Boot] [PATCH 3/9] Tegra: T30: Add CPU (armv7) files
Tom Warren
- [U-Boot] [PATCH] fdt: Check if the FDT address is configured
Jerry Van Baren
- [U-Boot] [PATCH 6/9] Tegra30: Add Cardhu board files
Stephen Warren
- [U-Boot] [PATCH 3/9] Tegra: T30: Add CPU (armv7) files
Tom Rini
- [U-Boot] [PATCH v4 1/2] Loop block device for sandbox
Tom Rini
- [U-Boot] How to understand the code flow of u-boot
Scott Wood
- [U-Boot] [PATCH 7/9] Tegra30: Add config files (common and Cardhu)
Stephen Warren
- [U-Boot] [PATCH 8/9] Tegra30: Add common pinmux config in board_early_init_f
Stephen Warren
- [U-Boot] [PATCH 7/9] Tegra30: Add config files (common and Cardhu)
Tom Rini
- [U-Boot] [PATCH 9/9] Tegra30: Enable Cardhu build (SPL)
Stephen Warren
- [U-Boot] [PATCH 7/9] Tegra30: Add config files (common and Cardhu)
Marek Vasut
- [U-Boot] [PATCH] ARM: arm1176: Define arch_cpu_init() at the SoC level
Marek Vasut
- [U-Boot] [PATCH] USB: musb_udc: Bugfix musb_peri_rx_ep
Marek Vasut
- [U-Boot] [PATCH] USB: musb_udc: Bugfix musb_peri_rx_ep
Marek Vasut
- [U-Boot] Pull request: u-boot-mips/master
Daniel Schwierzeck
- [U-Boot] Pull request: u-boot-mips/master
Daniel Schwierzeck
- [U-Boot] [PATCH 10/12] env: acl: Add environment variable access control list
Joe Hershberger
- [U-Boot] [PATCH] Atmel: sam9g10/9m10/9x5: Add support to boot DT kernel
Bo Shen
- [U-Boot] [PATCH 2/4 v2] net: Add driver for Zynq Gem IP
Joe Hershberger
- [U-Boot] [PATCH 4/4 v3] xilinx: Add new Zynq board
Joe Hershberger
- [U-Boot] [PATCH 1/4 v2] serial: Add Zynq serial driver
Joe Hershberger
- [U-Boot] [PATCH 2/4 v2] net: Add driver for Zynq Gem IP
Marek Vasut
- [U-Boot] [PATCH 1/4 v2] serial: Add Zynq serial driver
Marek Vasut
- [U-Boot] [PATCH v3 00/10] i2c for R-mobile
Tetsuyuki Kobayashi
- [U-Boot] [PATCH v3 01/10] i2c: sh_i2c.c: support iccl and icch extension
Tetsuyuki Kobayashi
- [U-Boot] [PATCH v3 02/10] i2c: sh_i2c.c: correct BUSY bit define in ICSR
Tetsuyuki Kobayashi
- [U-Boot] [PATCH v3 03/10] i2c: sh_i2c.c: adjust for SH73A0
Tetsuyuki Kobayashi
- [U-Boot] [PATCH v3 04/10] i2c: sh_i2c.c: support I2C2, I2C3 and I2C4
Tetsuyuki Kobayashi
- [U-Boot] [PATCH v3 05/10] i2c: sh_i2c: enable i2c_probe
Tetsuyuki Kobayashi
- [U-Boot] [PATCH v3 06/10] i2c: sh_i2c.c: check error in i2c_read and i2c_write
Tetsuyuki Kobayashi
- [U-Boot] [PATCH v3 07/10] i2c: sh_i2c.c: remove unused function
Tetsuyuki Kobayashi
- [U-Boot] [PATCH v3 08/10] arm: rmobile: kzm9g: enable I2C1
Tetsuyuki Kobayashi
- [U-Boot] [PATCH v3 09/10] arm: rmobile: kzm9g: enable I2C2
Tetsuyuki Kobayashi
- [U-Boot] [PATCH v3 10/10] i2c: sh_i2c: use setbits/clrbits macro
Tetsuyuki Kobayashi
- [U-Boot] [PATCH 1/4 v2] serial: Add Zynq serial driver
Joe Hershberger
- [U-Boot] [PATCH 4/4 v3] xilinx: Add new Zynq board
Michal Simek
- [U-Boot] [PATCH] snowball: Clear UART RX FIFO
Ramesh Chandrasekaran
- [U-Boot] [PATCH 2/2] ARM: at91sam9x5: enable MCI0 support for 9x5ek board.
Josh Wu
- [U-Boot] [PATCH 1/4 v3] serial: Add Zynq serial driver
Michal Simek
- [U-Boot] [PATCH 2/4 v3] net: Add driver for Zynq Gem IP
Michal Simek
- [U-Boot] [PATCH 3/4 v3] arm: Support new Xilinx Zynq platform
Michal Simek
- [U-Boot] [PATCH 4/4 v4] xilinx: Add new Zynq board
Michal Simek
- [U-Boot] [PATCH 1/4 v3] serial: Add Zynq serial driver
Michal Simek
- [U-Boot] [PATCH 2/4 v2] net: Add driver for Zynq Gem IP
Marek Vasut
- [U-Boot] [PATCH 1/4 v2] serial: Add Zynq serial driver
Marek Vasut
- [U-Boot] [PATCH 1/4 v3] serial: Add Zynq serial driver
Marek Vasut
- [U-Boot] [PATCH 2/4 v3] net: Add driver for Zynq Gem IP
Marek Vasut
- [U-Boot] [PATCH 3/4 v3] arm: Support new Xilinx Zynq platform
Marek Vasut
- [U-Boot] [PATCH 4/4 v4] xilinx: Add new Zynq board
Marek Vasut
- [U-Boot] [PATCH 3/4 v3] arm: Support new Xilinx Zynq platform
Michal Simek
- [U-Boot] [PATCH 1/4 v3] serial: Add Zynq serial driver
Michal Simek
- [U-Boot] [PATCH v2 0/3] Enable MMC support for at91sam9x5ek board.
Josh Wu
- [U-Boot] [PATCH v2 1/3] mmc: at91: add multi block read/write support.
Josh Wu
- [U-Boot] [PATCH v2 2/3] ARM: at91sam9x5: enable MCI0 support for 9x5ek board.
Josh Wu
- [U-Boot] [PATCH v2 3/3] mmc: at91: use max timeout value. It will avoid some situation that timeout happened.
Josh Wu
- [U-Boot] [Question] [ARM] global data array defined in board.c linkage problem : overlapping with relocation sections
Sun Eric
- [U-Boot] [PATCH v4 1/6] davinci: ea20: reorganisation LCD startup
Bastian Ruppert
- [U-Boot] [PATCH v4 2/6] davinci: ea20: the console is always set to the serial line
Bastian Ruppert
- [U-Boot] [PATCH v4 3/6] video: cfb_console: logo can be positioned via the splashpos variable
Bastian Ruppert
- [U-Boot] [PATCH v4 4/6] video: cfb_console: add function to plot the logo area black
Bastian Ruppert
- [U-Boot] [PATCH v4 5/6] da850/omap-l138: davinci_emac: Suppress auto negotiation if needed
Bastian Ruppert
- [U-Boot] [PATCH v4 6/6] davinci: ea20: add some configs and default environmet variables
Bastian Ruppert
- [U-Boot] [PATCH 1/2] mmc: at91: add multi block read/write support.
Josh Wu
- [U-Boot] [PATCH 3/4 v3] arm: Support new Xilinx Zynq platform
Marek Vasut
- [U-Boot] [PATCH 1/4 v3] serial: Add Zynq serial driver
Marek Vasut
- [U-Boot] [PATCH 1/3] dm: sparc: net: Fixup greth compile warnings
Marek Vasut
- [U-Boot] [PATCH 3/4 v3] arm: Support new Xilinx Zynq platform
Michal Simek
- [U-Boot] [PATCH 1/4 v3] serial: Add Zynq serial driver
Michal Simek
- [U-Boot] [PATCH 1/4 v4] serial: Add Zynq serial driver
Michal Simek
- [U-Boot] [PATCH 1/4 v4] serial: Add Zynq serial driver
Marek Vasut
- [U-Boot] [PATCH 3/4 v3] arm: Support new Xilinx Zynq platform
Marek Vasut
- [U-Boot] [PATCH 1/4 v3] serial: Add Zynq serial driver
Marek Vasut
- [U-Boot] [PATCH 1/4 v3] serial: Add Zynq serial driver
Michal Simek
- [U-Boot] [PATCH 3/4 v3] arm: Support new Xilinx Zynq platform
Michal Simek
- [U-Boot] [PATCH] phy: Add support for Marvell 88E1118R
Michal Simek
- [U-Boot] Don't get any interrupts once I boot into Linux
Greg Topmiller
- [U-Boot] Don't get any interrupts once I boot into Linux
Fabio Estevam
- [U-Boot] [PATCH] Correct the first byte of idcode1 for S25FL256S part
402jagan at gmail.com
- [U-Boot] [PATCH] sf: spansion: Correct the first byte of idcode1 for S25FL256S part
402jagan at gmail.com
- [U-Boot] [PATCH 00/16] pmic: Redesign PMIC framework to support multiple instances of devices
Lukasz Majewski
- [U-Boot] [PATCH 01/16] pmic:i2c: Handle PMIC I2C transmission comprising of two bytes
Lukasz Majewski
- [U-Boot] [PATCH 02/16] pmic:i2c: Add I2C byte order to PMIC framework
Lukasz Majewski
- [U-Boot] [PATCH 03/16] pmic:max8997: Switch the MAX8997 PMIC to be used with multibus I2C
Lukasz Majewski
- [U-Boot] [PATCH 04/16] pmic: Extend PMIC framework to support multiple instances of PMIC devices
Lukasz Majewski
- [U-Boot] [PATCH 05/16] pmic: Introduce power_board_init() method at ./lib/board.c file
Lukasz Majewski
- [U-Boot] [PATCH 06/16] pmic: Enable power_board_init() support at TRATS
Lukasz Majewski
- [U-Boot] [PATCH 07/16] pmic:chrg: Common information about charger and battery (power_chrg.h)
Lukasz Majewski
- [U-Boot] [PATCH 08/16] pmic:muic: Support for MUIC built into MAX8997 device
Lukasz Majewski
- [U-Boot] [PATCH 09/16] pmic:fuel-gauge: Support for MAX17042 fuel-gauge
Lukasz Majewski
- [U-Boot] [PATCH 10/16] pmic:max8997: Function for calculating LDO internal register value
Lukasz Majewski
- [U-Boot] [PATCH 11/16] arm:trats:pmic: Default PMIC(MAX8997) initialization for Samsung's TRATS board
Lukasz Majewski
- [U-Boot] [PATCH 12/16] arm:trats:pmic: Enable MUIC (MAX8997) at Samsung's TRATS board
Lukasz Majewski
- [U-Boot] [PATCH 13/16] arm:trats:pmic: Enable fuel-gauge (MAX17042) at Samsung's TRATS board
Lukasz Majewski
- [U-Boot] [PATCH 14/16] pmic:max8997: Support for MAX8997 internal charger control
Lukasz Majewski
- [U-Boot] [PATCH 15/16] arm:trats:pmic: Support for charging battery at Samsung's TRATS board
Lukasz Majewski
- [U-Boot] [PATCH 16/16] arm:trats:pmic: Power consumption reduction state for Samsung's TRATS board
Lukasz Majewski
- [U-Boot] Cache alignment warnings on Tegra (ARM)
Simon Glass
- [U-Boot] Don't get any interrupts once I boot into Linux
Benoît Thébaudeau
- [U-Boot] Don't get any interrupts once I boot into Linux
Benoît Thébaudeau
- [U-Boot] [PATCH] phy: Add support for Marvell 88E1118R
Joe Hershberger
- [U-Boot] Don't get any interrupts once I boot into Linux
Benoît Thébaudeau
- [U-Boot] [PATCH 1/4 v3] serial: Add Zynq serial driver
Marek Vasut
- [U-Boot] [PATCHv3] ARM: Add Altera SOCFPGA Cyclone5
Marek Vasut
- [U-Boot] [PATCHv3] ARM: Add Altera SOCFPGA Cyclone5
dinguyen at altera.com
- [U-Boot] [PATCHv3] ARM: Add Altera SOCFPGA Cyclone5
Tom Rini
- [U-Boot] FW: Don't get any interrupts once I boot into Linux
Greg Topmiller
- [U-Boot] [PATCH 09/16] pmic:fuel-gauge: Support for MAX17042 fuel-gauge
Tom Rini
- [U-Boot] [PATCH 10/16] pmic:max8997: Function for calculating LDO internal register value
Tom Rini
- [U-Boot] [PATCH 13/16] arm:trats:pmic: Enable fuel-gauge (MAX17042) at Samsung's TRATS board
Tom Rini
- [U-Boot] [PATCH v2 00/11] S3C24XX: Add support to MINI2416 board
José Miguel Gonçalves
- [U-Boot] [PATCH v2 01/11] ARM: fix relocation on ARM926EJS
José Miguel Gonçalves
- [U-Boot] [PATCH v2 02/11] S3C24XX: Add core support for Samsung's S3C24XX SoCs
José Miguel Gonçalves
- [U-Boot] [PATCH v2 03/11] serial: Add support to 4 ports in serial_s3c24x0
José Miguel Gonçalves
- [U-Boot] [PATCH v2 04/11] serial: Use a more precise baud rate generation for serial_s3c24x0
José Miguel Gonçalves
- [U-Boot] [PATCH v2 05/11] serial: Remove unnecessary delay in serial_s3c24x0
José Miguel Gonçalves
- [U-Boot] [PATCH v2 06/11] rtc: Improve rtc_get() on s3c24x0_rtc
José Miguel Gonçalves
- [U-Boot] [PATCH v2 07/11] rtc: Fix rtc_reset() on s3c24x0_rtc
José Miguel Gonçalves
- [U-Boot] [PATCH v2 08/11] rtc: Don't allow setting unsuported years on s3c24x0_rtc
José Miguel Gonçalves
- [U-Boot] [PATCH v2 09/11] S3C24XX: Add NAND Flash driver
José Miguel Gonçalves
- [U-Boot] [PATCH v2 10/11] Add u-boot-ubl.bin target to the Makefile
José Miguel Gonçalves
- [U-Boot] [PATCH v2 11/11] S3C24XX: Add support to MINI2416 board
José Miguel Gonçalves
- [U-Boot] [PATCH 15/16] arm:trats:pmic: Support for charging battery at Samsung's TRATS board
Tom Rini
- [U-Boot] Don't get any interrupts once I boot into Linux
Benoît Thébaudeau
- [U-Boot] [PATCH 00/16] pmic: Redesign PMIC framework to support multiple instances of devices
Tom Rini
- [U-Boot] [PATCH v2 02/11] S3C24XX: Add core support for Samsung's S3C24XX SoCs
Marek Vasut
- [U-Boot] [PATCH] common, hush [BUG]: exit not work in hush shell
Heiko Schocher
- [U-Boot] [PATCH v2 04/11] serial: Use a more precise baud rate generation for serial_s3c24x0
Marek Vasut
- [U-Boot] [PATCH v2 05/11] serial: Remove unnecessary delay in serial_s3c24x0
Marek Vasut
- [U-Boot] [PATCH v2 06/11] rtc: Improve rtc_get() on s3c24x0_rtc
Marek Vasut
- [U-Boot] [PATCH v2 07/11] rtc: Fix rtc_reset() on s3c24x0_rtc
Marek Vasut
- [U-Boot] [PATCH v2 08/11] rtc: Don't allow setting unsuported years on s3c24x0_rtc
Marek Vasut
- [U-Boot] [PATCH v2 09/11] S3C24XX: Add NAND Flash driver
Marek Vasut
- [U-Boot] [PATCH v2 10/11] Add u-boot-ubl.bin target to the Makefile
Marek Vasut
- [U-Boot] [PATCH v2 02/11] S3C24XX: Add core support for Samsung's S3C24XX SoCs
Marek Vasut
- [U-Boot] [PATCH 1/7] dm: Add skeleton support for cores and drivers
Tom Rini
- [U-Boot] [PATCH] common, hush [BUG]: exit not work in hush shell
Wolfgang Denk
- [U-Boot] [PATCH 0/7] [RFC] Driver model, take 1
Tom Rini
- [U-Boot] [PATCH v2 02/11] S3C24XX: Add core support for Samsung's S3C24XX SoCs
Tom Rini
- [U-Boot] [PATCH 10/12] env: acl: Add environment variable access control list
Wolfgang Denk
- [U-Boot] [PATCH v2 09/11] S3C24XX: Add NAND Flash driver
José Miguel Gonçalves
- [U-Boot] [PATCH v2 09/11] S3C24XX: Add NAND Flash driver
Tom Rini
- [U-Boot] [PATCH 1/4 v3] serial: Add Zynq serial driver
Joe Hershberger
- [U-Boot] [PATCH v2 11/11] S3C24XX: Add support to MINI2416 board
Tom Rini
- [U-Boot] [PATCH v2 09/11] S3C24XX: Add NAND Flash driver
Tom Rini
- [U-Boot] [PATCH v2 02/11] S3C24XX: Add core support for Samsung's S3C24XX SoCs
Scott Wood
- [U-Boot] [PATCH v2 02/11] S3C24XX: Add core support for Samsung's S3C24XX SoCs
Marek Vasut
- [U-Boot] [PATCH v2 10/11] Add u-boot-ubl.bin target to the Makefile
Tom Rini
- [U-Boot] [PATCH v2 02/11] S3C24XX: Add core support for Samsung's S3C24XX SoCs
Scott Wood
- [U-Boot] [PATCH v2 09/11] S3C24XX: Add NAND Flash driver
Scott Wood
- [U-Boot] Don't get any interrupts once I boot into Linux
Benoît Thébaudeau
- [U-Boot] [PATCH v2 09/11] S3C24XX: Add NAND Flash driver
Tom Rini
- [U-Boot] [PATCH v2 09/11] S3C24XX: Add NAND Flash driver
Scott Wood
- [U-Boot] [PATCH v2 8/8] FAT: Make it possible to read from any file position
Tom Rini
- [U-Boot] [PATCHv3] ARM: Add Altera SOCFPGA Cyclone5
Dinh Nguyen
- [U-Boot] [PATCH v4 1/2] ARM: Add Altera SOCFPGA Cyclone5
dinguyen at altera.com
- [U-Boot] [PATCH v4 2/2] ARM: kirkwood/orion5x: Use reset_cpu definition in include/common.h
dinguyen at altera.com
- [U-Boot] u-boot support for reading USB sticks formatted as NTFS
Bill
- [U-Boot] Don't get any interrupts once I boot into Linux
Fabio Estevam
- [U-Boot] Don't get any interrupts once I boot into Linux
Benoît Thébaudeau
- [U-Boot] u-boot support for reading USB sticks formatted as NTFS
Tom Rini
- [U-Boot] [PATCH v2 8/8] FAT: Make it possible to read from any file position
Tom Rini
- [U-Boot] [PATCH v2 8/8] FAT: Make it possible to read from any file position
Benoît Thébaudeau
- [U-Boot] [PATCH] mx35pdk: README: Remove NAND references
Fabio Estevam
- [U-Boot] [PATCH v4 2/2] ARM: kirkwood/orion5x: Use reset_cpu definition in include/common.h
Prafulla Wadaskar
- [U-Boot] U-boot's stack space on a Sequoia board
Corey Ashford
- [U-Boot] AR8031 Ethernet on mx6
Fabio Estevam
- [U-Boot] AR8031 Ethernet on mx6
Dirk Behme
- [U-Boot] [PATCH 3/6] arm: exynos4: Fix exynos4_fb structure
Minkyu Kang
- [U-Boot] U-boot's stack space on a Sequoia board
Wolfgang Denk
- [U-Boot] [PATCH 6/6] arm: exynos4: universal_C210: add display support
Minkyu Kang
- [U-Boot] [PATCH] arm:exynos4:universal_c210: implement software SPI
Minkyu Kang
- [U-Boot] [PATCH 2/2] IPL: Remove remains of OneNAND IPL
Minkyu Kang
- [U-Boot] A little introduction
Tom Cubie
- [U-Boot] [PATCH] fdt: Check if the FDT address is configured
Jerry Van Baren
- [U-Boot] Pull request: u-boot-fdt
Jerry Van Baren
- [U-Boot] [PATCH 1/2] libfdt: Add support for appending the values to a existing property
Jerry Van Baren
- [U-Boot] [PATCH 1/2] libfdt: Add support for appending the values to a existing property
Tabi Timur-B04825
- [U-Boot] [PATCH 1/2] libfdt: Add support for appending the values to a existing property
Jerry Van Baren
- [U-Boot] Problem Booting RTEMS with u-boot on Phycore LPC3250
SAeeD
- [U-Boot] [PATCH 2/2] IPL: Remove remains of OneNAND IPL
Marek Vasut
- [U-Boot] [PATCH v2 01/11] ARM: fix relocation on ARM926EJS
Marek Vasut
- [U-Boot] [PATCH] mx28evk: extend default environment
Otavio Salvador
- [U-Boot] AR8031 Ethernet on mx6
Fabio Estevam
- [U-Boot] AR8031 Ethernet on mx6
Marek Vasut
- [U-Boot] Cache alignment warnings on Tegra (ARM)
Thierry Reding
- [U-Boot] Cache alignment warnings on Tegra (ARM)
Marek Vasut
- [U-Boot] Cache alignment warnings on Tegra (ARM)
Thierry Reding
- [U-Boot] AR8031 Ethernet on mx6
Eric Nelson
- [U-Boot] Cache alignment warnings on Tegra (ARM)
Thierry Reding
- [U-Boot] Cache alignment warnings on Tegra (ARM)
Marek Vasut
- [U-Boot] [PATCH v4 2/2] ARM: kirkwood/orion5x: Use reset_cpu definition in include/common.h
Pavel Machek
- [U-Boot] Limit of kernel size
J.Hwan Kim
- [U-Boot] Cache alignment warnings on Tegra (ARM)
Simon Glass
- [U-Boot] Limit of kernel size
Dan Malek
- [U-Boot] Limit of kernel size
Heiko Schocher
- [U-Boot] [PATCH] common, hush [BUG]: exit not work in hush shell
Heiko Schocher
- [U-Boot] Cache alignment warnings on Tegra (ARM)
Thierry Reding
- [U-Boot] [PATCH v2 11/11] S3C24XX: Add support to MINI2416 board
José Miguel Gonçalves
- [U-Boot] [PATCH v2 09/11] S3C24XX: Add NAND Flash driver
José Miguel Gonçalves
- [U-Boot] [PATCH v2 10/11] Add u-boot-ubl.bin target to the Makefile
José Miguel Gonçalves
- [U-Boot] Don't get any interrupts once I boot into Linux
Stefano Babic
- [U-Boot] [PATCH v2 01/11] ARM: fix relocation on ARM926EJS
José Miguel Gonçalves
- [U-Boot] [PATCH v2 01/11] ARM: fix relocation on ARM926EJS
Marek Vasut
- [U-Boot] [PATCH v2 01/11] ARM: fix relocation on ARM926EJS
José Miguel Gonçalves
- [U-Boot] [PATCH v4 1/2] Loop block device for sandbox
Pavel Herrmann
- [U-Boot] [PATCH] Fix checkpatch warnings about externs in *.c
Pavel Herrmann
- [U-Boot] [PATCH v5 1/2] Loop block device for sandbox
Pavel Herrmann
- [U-Boot] [PATCH] Fix checkpatch warnings about externs in *.c
Marek Vasut
- [U-Boot] [PATCH] Fix checkpatch warnings about externs in *.c
Pavel Herrmann
- [U-Boot] [PATCH] MX6: drop binary constants from iomux header
Stefano Babic
- [U-Boot] [PATCH] Fix checkpatch warnings about externs in *.c
Marek Vasut
- [U-Boot] Limit of kernel size
J.Hwan Kim
- [U-Boot] [PATCH v2 01/11] ARM: fix relocation on ARM926EJS
Marek Vasut
- [U-Boot] [PATCH 2/2] tegra: enable lp0 on paz00
Marc Dietrich
- [U-Boot] [PATCH v2 01/11] ARM: fix relocation on ARM926EJS
José Miguel Gonçalves
- [U-Boot] [PATCH 0/4] Fix gcc warnings on MIPS 64 bit
daniel.schwierzeck at gmail.com
- [U-Boot] [PATCH 1/4] lib: vsprintf.c: fix checkpath.pl warnings
daniel.schwierzeck at gmail.com
- [U-Boot] [PATCH 2/4] lib: vsprintf.c: replace NUM_TYPE with s64/u64 types
daniel.schwierzeck at gmail.com
- [U-Boot] [PATCH 3/4] common: cmd_elf.c: fix checkpath.pl warnings
daniel.schwierzeck at gmail.com
- [U-Boot] [PATCH 4/4] common: cmd_elf.c: use uintptr_t for casts from u32 to void*
daniel.schwierzeck at gmail.com
- [U-Boot] [PATCH v2 01/11] ARM: fix relocation on ARM926EJS
Marek Vasut
- [U-Boot] [PATCH] common/i2c: Add i2c write command
York Sun
- [U-Boot] [RFC PATCH v2 0/6] Port of MUSB driver from Linux
Ilya Yanok
- [U-Boot] [RFC PATCH v2 1/6] linux/usb/ch9.h: update with the version from Linux tree
Ilya Yanok
- [U-Boot] [RFC PATCH v2 2/6] usb: use linux/usb/ch9.h instead of usbdescriptors.h
Ilya Yanok
- [U-Boot] [RFC PATCH v2 3/6] musb-new: port of Linux musb driver
Ilya Yanok
- [U-Boot] [RFC PATCH v2 4/6] musb-new: dsps backend driver
Ilya Yanok
- [U-Boot] [RFC PATCH v2 5/6] am33xx: init OTG hardware and new musb gadget driver
Ilya Yanok
- [U-Boot] [RFC PATCH v2 6/6] am335x_evm: enable both musb gadget and host
Ilya Yanok
- [U-Boot] [PATCH 00/71] serial: Massive rework of the serial subsystem
Marek Vasut
- [U-Boot] [PATCH 01/71] serial: Coding style cleanup of struct serial_device
Marek Vasut
- [U-Boot] [PATCH 02/71] serial: Rename .init() and .uninit() in serial_device
Marek Vasut
- [U-Boot] [PATCH 03/71] serial: Properly spell out the structure member names of serial_driver
Marek Vasut
- [U-Boot] [PATCH 04/71] serial: pxa: Implement default_serial_console in serial_pxa.c
Marek Vasut
- [U-Boot] [PATCH 05/71] serial: pxa: Make use of default_serial_console in serial_pxa
Marek Vasut
- [U-Boot] [PATCH 06/71] serial: pxa: Make local functions static
Marek Vasut
- [U-Boot] [PATCH 07/71] serial: mpc512x: Properly define CONFIG_SYS_PSC3 in config files
Marek Vasut
- [U-Boot] [PATCH 08/71] serial: Implement serial_initfunc() macro
Marek Vasut
- [U-Boot] [PATCH 09/71] serial: mpc8xx: Move serial registration from serial_initialize()
Marek Vasut
- [U-Boot] [PATCH 10/71] serial: s3c24xx: Move serial registration from serial_initialize()
Marek Vasut
- [U-Boot] [PATCH 11/71] serial: pxa: Move serial registration from serial_initialize()
Marek Vasut
- [U-Boot] [PATCH 12/71] serial: s5p: Move serial registration from serial_initialize()
Marek Vasut
- [U-Boot] [PATCH 13/71] serial: microblaze: Move serial registration from serial_initialize()
Marek Vasut
- [U-Boot] [PATCH 14/71] serial: mpc512x: Move serial registration from serial_initialize()
Marek Vasut
- [U-Boot] [PATCH 15/71] serial: ns16550: Move serial registration from serial_initialize()
Marek Vasut
- [U-Boot] [PATCH 16/71] serial: bfin: Remove the bfin_serialN_device exports from serial.h
Marek Vasut
- [U-Boot] [PATCH 17/71] serial: bfin: Adjust serial_register_bfin_uart()
Marek Vasut
- [U-Boot] [PATCH 18/71] serial: zoom2: Remove zoom2 serial prototypes from serial.h
Marek Vasut
- [U-Boot] [PATCH 19/71] serial: bfin: Flip the jtag serial console to CONFIG_SERIAL_MULTI
Marek Vasut
- [U-Boot] [PATCH 20/71] serial: mips: Implement CONFIG_SERIAL_MULTI into au1x00 serial driver
Marek Vasut
- [U-Boot] [PATCH 21/71] serial: mips: Implement CONFIG_SERIAL_MULTI into asc serial driver
Marek Vasut
- [U-Boot] [PATCH 22/71] serial: mips: Implement CONFIG_SERIAL_MULTI into JZ serial driver
Marek Vasut
- [U-Boot] [PATCH 23/71] serial: powerpc: Implement CONFIG_SERIAL_MULTI into mpc5xx serial driver
Marek Vasut
- [U-Boot] [PATCH 24/71] serial: powerpc: Implement CONFIG_SERIAL_MULTI into mpc8220 serial driver
Marek Vasut
- [U-Boot] [PATCH 25/71] serial: powerpc: Implement CONFIG_SERIAL_MULTI into mpc8260 serial drivers
Marek Vasut
- [U-Boot] [PATCH 26/71] serial: powerpc: Implement CONFIG_SERIAL_MULTI into mpc85xx serial driver
Marek Vasut
- [U-Boot] [PATCH 27/71] serial: powerpc: Implement CONFIG_SERIAL_MULTI into iop480 serial driver
Marek Vasut
- [U-Boot] [PATCH 28/71] serial: sparc: Implement CONFIG_SERIAL_MULTI into leon2 serial driver
Marek Vasut
- [U-Boot] [PATCH 29/71] serial: sparc: Implement CONFIG_SERIAL_MULTI into leon3 serial driver
Marek Vasut
- [U-Boot] [PATCH 30/71] serial: powerpc: Implement CONFIG_SERIAL_MULTI into marvell serial driver
Marek Vasut
- [U-Boot] [PATCH 31/71] serial: powerpc: Implement CONFIG_SERIAL_MULTI into amirix serial driver
Marek Vasut
- [U-Boot] [PATCH 32/71] serial: powerpc: Implement CONFIG_SERIAL_MULTI into bmw serial driver
Marek Vasut
- [U-Boot] [PATCH 33/71] serial: powerpc: Implement CONFIG_SERIAL_MULTI into cogent serial driver
Marek Vasut
- [U-Boot] [PATCH 34/71] serial: powerpc: Implement CONFIG_SERIAL_MULTI into cpci750 serial driver
Marek Vasut
- [U-Boot] [PATCH 35/71] serial: powerpc: Implement CONFIG_SERIAL_MULTI into evb64260 serial driver
Marek Vasut
- [U-Boot] [PATCH 36/71] serial: powerpc: Implement CONFIG_SERIAL_MULTI into ml2 serial driver
Marek Vasut
- [U-Boot] [PATCH 37/71] serial: powerpc: Implement CONFIG_SERIAL_MULTI into sconsole serial driver
Marek Vasut
- [U-Boot] [PATCH 38/71] serial: powerpc: Implement CONFIG_SERIAL_MULTI into p3mx serial driver
Marek Vasut
- [U-Boot] [PATCH 39/71] serial: arm: Implement CONFIG_SERIAL_MULTI into altera_jtag serial driver
Marek Vasut
- [U-Boot] [PATCH 40/71] serial: arm: Implement CONFIG_SERIAL_MULTI into altera serial driver
Marek Vasut
- [U-Boot] [PATCH 41/71] serial: arm: Implement CONFIG_SERIAL_MULTI into atmel serial driver
Marek Vasut
- [U-Boot] [PATCH 42/71] serial: arm: Implement CONFIG_SERIAL_MULTI into lpc32xx serial driver
Marek Vasut
- [U-Boot] [PATCH 43/71] serial: mcf: Implement CONFIG_SERIAL_MULTI into MCF serial driver
Marek Vasut
- [U-Boot] [PATCH 44/71] serial: Implement CONFIG_SERIAL_MULTI into ns9750 serial driver
Marek Vasut
- [U-Boot] [PATCH 45/71] serial: oc: Implement CONFIG_SERIAL_MULTI into OpenCores serial driver
Marek Vasut
- [U-Boot] [PATCH 46/71] serial: arm: Implement CONFIG_SERIAL_MULTI into s3c4510b serial driver
Marek Vasut
- [U-Boot] [PATCH 47/71] serial: arm: Implement CONFIG_SERIAL_MULTI into s3c64xx serial driver
Marek Vasut
- [U-Boot] [PATCH 48/71] serial: sandbox: Implement CONFIG_SERIAL_MULTI into sandbox serial driver
Marek Vasut
- [U-Boot] [PATCH 49/71] serial: arm: Implement CONFIG_SERIAL_MULTI into clps7111 serial driver
Marek Vasut
- [U-Boot] [PATCH 50/71] serial: arm: Implement CONFIG_SERIAL_MULTI into imx serial driver
Marek Vasut
- [U-Boot] [PATCH 51/71] serial: arm: Implement CONFIG_SERIAL_MULTI into ixp serial driver
Marek Vasut
- [U-Boot] [PATCH 52/71] serial: arm: Implement CONFIG_SERIAL_MULTI into ks8695 serial driver
Marek Vasut
- [U-Boot] [PATCH 53/71] serial: arm: Implement CONFIG_SERIAL_MULTI into lh7a40x serial driver
Marek Vasut
- [U-Boot] [PATCH 54/71] serial: arm: Implement CONFIG_SERIAL_MULTI into lpc2292 serial driver
Marek Vasut
- [U-Boot] [PATCH 55/71] serial: Implement CONFIG_SERIAL_MULTI into max3100 serial driver
Marek Vasut
- [U-Boot] [PATCH 56/71] serial: arm: Implement CONFIG_SERIAL_MULTI into mxc serial driver
Marek Vasut
- [U-Boot] [PATCH 57/71] serial: arm: Implement CONFIG_SERIAL_MULTI into netarm serial driver
Marek Vasut
- [U-Boot] [PATCH 58/71] serial: arm: Implement CONFIG_SERIAL_MULTI into pl01x serial driver
Marek Vasut
- [U-Boot] [PATCH 59/71] serial: arm: Implement CONFIG_SERIAL_MULTI into s3c44b0 serial driver
Marek Vasut
- [U-Boot] [PATCH 60/71] serial: arm: Implement CONFIG_SERIAL_MULTI into sa1100 serial driver
Marek Vasut
- [U-Boot] [PATCH 61/71] serial: sh: Implement CONFIG_SERIAL_MULTI into sh serial driver
Marek Vasut
- [U-Boot] [PATCH 62/71] serial: spl: Implement empty functions for SPL
Marek Vasut
- [U-Boot] [PATCH 63/71] serial: mxs: spl: Remove empty serial_* functions from SPL code
Marek Vasut
- [U-Boot] [PATCH 64/71] serial: ns16550: Call usbtty_poll only in non-SPL build
Marek Vasut
- [U-Boot] [PATCH 65/71] serial: Use puts() and hang() instead of panic() in SPL
Marek Vasut
- [U-Boot] [PATCH 66/71] serial: Unconditionally enable CONFIG_SERIAL_MULTI
Marek Vasut
- [U-Boot] [PATCH 67/71] serial: Remove CONFIG_SERIAL_MULTI from config files
Marek Vasut
- [U-Boot] [PATCH 68/71] serial: Remove CONFIG_SERIAL_MULTI from serial drivers
Marek Vasut
- [U-Boot] [PATCH 69/71] serial: Remove CONFIG_SERIAL_MULTI from remaining sources
Marek Vasut
- [U-Boot] [PATCH 70/71] serial: Compile common/serial.c by default
Marek Vasut
- [U-Boot] [PATCH 71/71] serial: Enhance the manual relocation
Marek Vasut
- [U-Boot] [PATCH 3/6] arm: exynos4: Fix exynos4_fb structure
leedonghwa
- [U-Boot] Problem Booting RTEMS with u-boot on Phycore LPC3250
Wolfgang Denk
- [U-Boot] [PATCH v4 5/6] da850/omap-l138: davinci_emac: Suppress auto negotiation if needed
Prabhakar Lad
- [U-Boot] [PATCH] common, hush [BUG]: exit not work in hush shell
Wolfgang Denk
- [U-Boot] [PATCH v2 01/11] ARM: fix relocation on ARM926EJS
Christian Riesch
- [U-Boot] [PATCH v2 10/11] Add u-boot-ubl.bin target to the Makefile
Christian Riesch
- [U-Boot] [PATCH 41/71] serial: arm: Implement CONFIG_SERIAL_MULTI into atmel serial driver
Andreas Bießmann
- [U-Boot] [PATCH] phy: Add support for Marvell 88E1118R
Michal Simek
- [U-Boot] [PATCH v2 10/11] Add u-boot-ubl.bin target to the Makefile
José Miguel Gonçalves
- [U-Boot] [PATCH v2 01/11] ARM: fix relocation on ARM926EJS
José Miguel Gonçalves
- [U-Boot] AR8031 Ethernet on mx6
Dirk Behme
- [U-Boot] [PATCH v2 01/11] ARM: fix relocation on ARM926EJS
Christian Riesch
- [U-Boot] [PATCH v2 10/11] Add u-boot-ubl.bin target to the Makefile
Christian Riesch
- [U-Boot] [PATCH v2 01/11] ARM: fix relocation on ARM926EJS
José Miguel Gonçalves
- [U-Boot] [PATCH v2 10/11] Add u-boot-ubl.bin target to the Makefile
José Miguel Gonçalves
- [U-Boot] [PATCH 02/16] pmic:i2c: Add I2C byte order to PMIC framework
Stefano Babic
- [U-Boot] [PATCH 03/16] pmic:max8997: Switch the MAX8997 PMIC to be used with multibus I2C
Stefano Babic
- [U-Boot] [PATCH 08/16] pmic:muic: Support for MUIC built into MAX8997 device
Stefano Babic
- [U-Boot] [PATCH v5 4/5] OMAP: networking support for SPL
Ilya Yanok
- [U-Boot] [PATCH 41/71] serial: arm: Implement CONFIG_SERIAL_MULTI into atmel serial driver
Marek Vasut
- [U-Boot] [i2c] Pull request
Heiko Schocher
- [U-Boot] [PATCH 41/71] serial: arm: Implement CONFIG_SERIAL_MULTI into atmel serial driver
Andreas Bießmann
- [U-Boot] [PATCH 41/71] serial: arm: Implement CONFIG_SERIAL_MULTI into atmel serial driver
Marek Vasut
- [U-Boot] [PATCH] mx28evk: extend default environment
Stefano Babic
- [U-Boot] [PATCH v2 09/11] S3C24XX: Add NAND Flash driver
José Miguel Gonçalves
- [U-Boot] [PATCH] mx35pdk: README: Remove NAND references
Stefano Babic
- [U-Boot] [PATCH v2 1/2] mx6q: Factor out common DDR3 init code
Stefano Babic
- [U-Boot] [PATCH 6/6] arm: exynos4: universal_C210: add display support
Piotr Wilczek
- [U-Boot] AR8031 Ethernet on mx6
Fabio Estevam
- [U-Boot] [PATCH] arm:exynos4:universal_c210: implement software SPI
Piotr Wilczek
- [U-Boot] [GIT PULL] Pull request: u-boot-imx
Stefano Babic
- [U-Boot] [PATCH 50/71] serial: arm: Implement CONFIG_SERIAL_MULTI into imx serial driver
Stefano Babic
- [U-Boot] [PATCH 50/71] serial: arm: Implement CONFIG_SERIAL_MULTI into imx serial driver
Marek Vasut
- [U-Boot] Problem Booting RTEMS with u-boot on Phycore LPC3250
SAeeD
- [U-Boot] Weekly status
Tom Rini
- [U-Boot] [PATCH v2 11/11] S3C24XX: Add support to MINI2416 board
Tom Rini
- [U-Boot] [PATCH v2 10/11] Add u-boot-ubl.bin target to the Makefile
Tom Rini
- [U-Boot] [PATCH v2 11/11] S3C24XX: Add support to MINI2416 board
José Miguel Gonçalves
- [U-Boot] [PATCH v2 11/11] S3C24XX: Add support to MINI2416 board
Tom Rini
- [U-Boot] [PATCH 2/2] tegra: enable lp0 on paz00
Tom Warren
- [U-Boot] [PATCH v2 10/11] Add u-boot-ubl.bin target to the Makefile
Scott Wood
- [U-Boot] [PATCH v2 10/11] Add u-boot-ubl.bin target to the Makefile
Marek Vasut
- [U-Boot] [PATCH] mx6: Remove lowlevel_init.S
Fabio Estevam
- [U-Boot] [PATCH v2 10/11] Add u-boot-ubl.bin target to the Makefile
Tom Rini
- [U-Boot] [PATCH v2 10/11] Add u-boot-ubl.bin target to the Makefile
Tom Rini
- [U-Boot] [PATCH v2 09/11] S3C24XX: Add NAND Flash driver
Tom Rini
- [U-Boot] [PATCH 1/3] spi: add atmel at25df321 serial flash support
Andreas Bießmann
- [U-Boot] [PATCH 1/4] spiflash: at25: using common spi flash operation
Andreas Bießmann
- [U-Boot] [PATCH v2 09/11] S3C24XX: Add NAND Flash driver
Scott Wood
- [U-Boot] [PATCH v5 4/5] OMAP: networking support for SPL
Tom Rini
- [U-Boot] [PATCH] Atmel: sam9g10/9m10/9x5: Add support to boot DT kernel
Andreas Bießmann
- [U-Boot] =?true?q?=5BPULL=7D=20please=20pull=20u-boot-atmel/master=20into=20u-boot-arm/master?=
Andreas Bießmann
- [U-Boot] [PATCH v2 09/11] S3C24XX: Add NAND Flash driver
José Miguel Gonçalves
- [U-Boot] [PATCH v2 09/11] S3C24XX: Add NAND Flash driver
Tom Rini
- [U-Boot] [PATCH v2 09/11] S3C24XX: Add NAND Flash driver
Scott Wood
- [U-Boot] [PATCH v2 01/11] ARM: fix relocation on ARM926EJS
Tom Rini
- [U-Boot] [PATCH v2 01/11] ARM: fix relocation on ARM926EJS
Scott Wood
- [U-Boot] U-boot's stack space on a Sequoia board
Corey Ashford
- [U-Boot] [PATCH v2 01/11] ARM: fix relocation on ARM926EJS
Marek Vasut
- [U-Boot] [PATCH v2 01/11] ARM: fix relocation on ARM926EJS
José Miguel Gonçalves
- [U-Boot] [PATCH v2 01/11] ARM: fix relocation on ARM926EJS
Tom Rini
- [U-Boot] [PATCH v2 10/11] Add u-boot-ubl.bin target to the Makefile
Scott Wood
- [U-Boot] [PATCH v2 01/11] ARM: fix relocation on ARM926EJS
Tom Rini
- [U-Boot] [PATCH v2 01/11] ARM: fix relocation on ARM926EJS
Marek Vasut
- [U-Boot] Weekly status
Marek Vasut
- [U-Boot] [PULL] u-boot-usb/master
Marek Vasut
- [U-Boot] [PATCH v2 10/11] Add u-boot-ubl.bin target to the Makefile
Tom Rini
- [U-Boot] [PATCH v5 4/5] OMAP: networking support for SPL
Ilya Yanok
- [U-Boot] [PATCH v2 09/11] S3C24XX: Add NAND Flash driver
Tom Rini
- [U-Boot] [PATCH v3 3/7] gpt:doc: GPT (GUID Partition Table) documentation
Stephen Warren
- [U-Boot] [PATCH v2 01/11] ARM: fix relocation on ARM926EJS
Tom Rini
- [U-Boot] [PATCH v2 09/11] S3C24XX: Add NAND Flash driver
José Miguel Gonçalves
- [U-Boot] [PATCH v5 4/5] OMAP: networking support for SPL
Tom Rini
- [U-Boot] [PATCH v3 5/7] gpt: Support for GPT (GUID Partition Table) restoration
Stephen Warren
- [U-Boot] [PATCH v5 4/5] OMAP: networking support for SPL
Ilya Yanok
- [U-Boot] [PATCH v5 4/5] OMAP: networking support for SPL
Ilya Yanok
- [U-Boot] [PATCH v2 10/11] Add u-boot-ubl.bin target to the Makefile
Scott Wood
- [U-Boot] [PATCH v5 4/5] OMAP: networking support for SPL
Tom Rini
- [U-Boot] [PATCH v2 09/11] S3C24XX: Add NAND Flash driver
Tom Rini
- [U-Boot] [PATCH v2 09/11] S3C24XX: Add NAND Flash driver
José Miguel Gonçalves
- [U-Boot] [PATCH v5 4/5] OMAP: networking support for SPL
Ilya Yanok
- [U-Boot] U-boot's stack space on a Sequoia board
Wolfgang Denk
- [U-Boot] [PULL] u-boot-usb/master
Tom Rini
- [U-Boot] [PATCH v2 09/11] S3C24XX: Add NAND Flash driver
Tom Rini
- [U-Boot] [PATCH] mx51evk: Add CONFIG_REVISION_TAG
Benoît Thébaudeau
- [U-Boot] [PATCH] Fix checkpatch warnings about externs in *.c
Tom Rini
- [U-Boot] [PULL] u-boot-usb/master
Marek Vasut
- [U-Boot] [PATCH v2 10/11] Add u-boot-ubl.bin target to the Makefile
Wolfgang Denk
- [U-Boot] [PATCH 0/2] i.MX6: mx6qsabrelite: Add splash screen support
Eric Nelson
- [U-Boot] [PATCH 1/2] i.MX6: change register name for CCM_CHSCCDR to match ref. manual
Eric Nelson
- [U-Boot] [PATCH 2/2] i.MX6: mx6qsabrelite: Add splash screen support
Eric Nelson
- [U-Boot] [PULL] u-boot-usb/master
Tom Rini
- [U-Boot] [PATCH v6 0/4] OMAP: SPL networking support
Ilya Yanok
- [U-Boot] [PATCH v6 1/4] net/bootp: add VCI support for BOOTP also
Ilya Yanok
- [U-Boot] [PATCH v6 2/4] OMAP: spl: call timer_init() from SPL
Ilya Yanok
- [U-Boot] [PATCH v6 3/4] OMAP: networking support for SPL
Ilya Yanok
- [U-Boot] [PATCH v6 4/4] am335x_evm: enable networking in SPL
Ilya Yanok
- [U-Boot] [PATCH 2/2] i.MX6: mx6qsabrelite: Add splash screen support
Fabio Estevam
- [U-Boot] [PATCH v3 2/4] usb: ehci: rework to take advantage of new lowlevel interface
Marek Vasut
- [U-Boot] [PATCH 02/16] pmic:i2c: Add I2C byte order to PMIC framework
Lukasz Majewski
- [U-Boot] [PATCH 0/2] i.MX6: mx6qsabrelite: Add splash screen support
Anatolij Gustschin
- [U-Boot] [PATCH 03/16] pmic:max8997: Switch the MAX8997 PMIC to be used with multibus I2C
Lukasz Majewski
- [U-Boot] [PATCH 00/16] pmic: Redesign PMIC framework to support multiple instances of devices
Lukasz Majewski
- [U-Boot] [PATCH 15/16] arm:trats:pmic: Support for charging battery at Samsung's TRATS board
Lukasz Majewski
- [U-Boot] [PATCH 13/16] arm:trats:pmic: Enable fuel-gauge (MAX17042) at Samsung's TRATS board
Lukasz Majewski
- [U-Boot] [PATCH 10/16] pmic:max8997: Function for calculating LDO internal register value
Lukasz Majewski
- [U-Boot] [PATCH 09/16] pmic:fuel-gauge: Support for MAX17042 fuel-gauge
Lukasz Majewski
- [U-Boot] [PATCH 08/16] pmic:muic: Support for MUIC built into MAX8997 device
Lukasz Majewski
- [U-Boot] [PATCH] video/powerpc: don't touch DIU registers that we don't need
Timur Tabi
- [U-Boot] [PATCH] mtd: support ONFI multi lun NAND
Matthieu CASTET
- [U-Boot] [PATCH 15/16] arm:trats:pmic: Support for charging battery at Samsung's TRATS board
Tom Rini
- [U-Boot] using initrd with U-boot on the imx28evk
Marek Vasut
- [U-Boot] Cache alignment warnings on Tegra (ARM)
Simon Glass
- [U-Boot] using initrd with U-boot on the imx28evk
Fabio Estevam
- [U-Boot] [PATCH] common/i2c: Add i2c write command
Tom Rini
- [U-Boot] [PATCH] mtd: support ONFI multi lun NAND
Scott Wood
- [U-Boot] [PATCH 42/71] serial: arm: Implement CONFIG_SERIAL_MULTI into lpc32xx serial driver
Vladimir Zapolskiy
- [U-Boot] [PATCH v2 1/4] nand: Add support for unlock.invert
Scott Wood
- [U-Boot] [PATCH v2 2/4] nand: Change ulong to loff_t and size_t
Scott Wood
- [U-Boot] [PATCH v2 3/4] nand: consolidate duplicated constants
Scott Wood
- [U-Boot] [PATCH v2 4/4] nand: Make NAND lock status compatible with Micron
Scott Wood
- [U-Boot] [PATCH 00/71] serial: Massive rework of the serial subsystem
Tom Rini
- [U-Boot] [PATCH 00/71] serial: Massive rework of the serial subsystem
Marek Vasut
- [U-Boot] [PATCH V2 0/2] i.MX6: mx6qsabrelite: Add splash screen support
Eric Nelson
- [U-Boot] [PATCH V2 1/2] i.MX6: change register name for CCM_CHSCCDR to match ref. manual
Eric Nelson
- [U-Boot] [PATCH V2 2/2] i.MX6: mx6qsabrelite: Add splash screen support
Eric Nelson
- [U-Boot] [PATCH] common/i2c: Add i2c write command
sun york-R58495
- [U-Boot] [PATCH 0/5] mpc8308rdb: improved hardware support
Kim Phillips
- [U-Boot] [PATCH] common/i2c: Add i2c write command
Tom Rini
- [U-Boot] [GIT PULL] mpc83xx: mpc8308rdb enhancements
Kim Phillips
- [U-Boot] [PATCH V2 2/2] i.MX6: mx6qsabrelite: Add splash screen support
Fabio Estevam
- [U-Boot] mtd: nand: allow NAND_NO_SUBPAGE_WRITE to be set from driver
Scott Wood
- [U-Boot] mtd: nand: allow NAND_NO_SUBPAGE_WRITE to be set from driver
Marek Vasut
- [U-Boot] mtd: nand: allow NAND_NO_SUBPAGE_WRITE to be set from driver
Scott Wood
- [U-Boot] [PATCH V2 2/2] i.MX6: mx6qsabrelite: Add splash screen support
Eric Nelson
- [U-Boot] [PATCH v6 3/4] OMAP: networking support for SPL
Tom Rini
- [U-Boot] [PATCH v2 13/13] mxc nand: Add support for i.MX5
Scott Wood
- [U-Boot] [PATCH 06/13] mxc nand: Access all ecc_status_result fields
Scott Wood
- [U-Boot] [PATCH V2 2/2] i.MX6: mx6qsabrelite: Add splash screen support
Eric Nelson
- [U-Boot] [PATCH V2 2/2] i.MX6: mx6qsabrelite: Add splash screen support
Fabio Estevam
- [U-Boot] [PATCH 06/13] mxc nand: Access all ecc_status_result fields
Scott Wood
- [U-Boot] [PATCH v3 10/10] i2c: sh_i2c: use setbits/clrbits macro
Nobuhiro Iwamatsu
- [U-Boot] [PATCH 61/71] serial: sh: Implement CONFIG_SERIAL_MULTI into sh serial driver
Nobuhiro Iwamatsu
- [U-Boot] [PATCH v2 13/13] mxc nand: Add support for i.MX5
Scott Wood
- [U-Boot] [PATCH] sh: ap_sh4a_4a: Fixed initialization value of DDR memory
Nobuhiro Iwamatsu
- [U-Boot] [PATCH] net: sh_eth: Add support R8A7740 of rmobile (arm core)
Nobuhiro Iwamatsu
- [U-Boot] [GIT PULL] mpc83xx: mpc8308rdb enhancements
Tom Rini
- [U-Boot] [PATCH 00/13] mxc nand: Add support for i.MX5
Scott Wood
- [U-Boot] Pull request: nand flash
Scott Wood
- [U-Boot] [PATCH 12/71] serial: s5p: Move serial registration from serial_initialize()
Minkyu Kang
- [U-Boot] [PATCH 47/71] serial: arm: Implement CONFIG_SERIAL_MULTI into s3c64xx serial driver
Minkyu Kang
- [U-Boot] [PATCH] gpio:fix: Proper handling of GPIO subsystem parts at Samsung devices
Minkyu Kang
- [U-Boot] [PATCH] video: cfb_console: flush dcache for frame buffer in DRAM
Eric Nelson
- [U-Boot] [GIT PULL] mpc83xx: mpc8308rdb enhancements
Ira W. Snyder
- [U-Boot] [PATCH] mx51evk: Add CONFIG_REVISION_TAG
Fabio Estevam
- [U-Boot] [PATCH] board/freescale/common:QIXIS:Fix magic number usage
Prabhakar Kushwaha
- [U-Boot] [PATCH] common/i2c: Add i2c write command
York Sun
- [U-Boot] [PATCH 03/71] serial: Properly spell out the structure member names of serial_driver
Michal Simek
- [U-Boot] [PATCH 13/71] serial: microblaze: Move serial registration from serial_initialize()
Michal Simek
- [U-Boot] [PATCH] Exynos5250: Enable PXE Support
Chander Kashyap
- [U-Boot] [PATCHv4] [RFC] DM: early_malloc for DM added.
Tomas Hlavacek
- [U-Boot] USB ehci driver query
Puneet Sharma
- [U-Boot] [PATCH V2 2/2] i.MX6: mx6qsabrelite: Add splash screen support
Stefano Babic
- [U-Boot] [PATCH] mx6: Remove lowlevel_init.S
Dirk Behme
- [U-Boot] USB ehci driver query
Puneet Sharma
- [U-Boot] [PATCH v2 13/13] mxc nand: Add support for i.MX5
Benoît Thébaudeau
- [U-Boot] [PATCH v7 3/4] OMAP: networking support for SPL
Ilya Yanok
- [U-Boot] [PATCH v6 3/4] OMAP: networking support for SPL
Ilya Yanok
- [U-Boot] [PATCHv4] [RFC] DM: early_malloc for DM added.
Marek Vasut
- [U-Boot] [PATCH v2 11/11] S3C24XX: Add support to MINI2416 board
José Miguel Gonçalves
- [U-Boot] [PATCH] mx6: Remove lowlevel_init.S
Fabio Estevam
- [U-Boot] using initrd with U-boot on the imx28evk
Bill
- [U-Boot] [PATCH V2 2/2] i.MX6: mx6qsabrelite: Add splash screen support
Eric Nelson
- [U-Boot] [PATCH] mx51evk: Add CONFIG_REVISION_TAG
Fabio Estevam
- [U-Boot] using initrd with U-boot on the imx28evk
Marek Vasut
- [U-Boot] [PATCH] mx51evk: Add CONFIG_REVISION_TAG
Fabio Estevam
- [U-Boot] [PATCH] mx51evk: Add CONFIG_REVISION_TAG
Benoît Thébaudeau
- [U-Boot] [PATCH V2 2/2] i.MX6: mx6qsabrelite: Add splash screen support
Stefano Babic
- [U-Boot] [PATCH] mx51evk: Add CONFIG_REVISION_TAG
Benoît Thébaudeau
- [U-Boot] [PATCH] mx51evk: Add CONFIG_REVISION_TAG
Fabio Estevam
- [U-Boot] [PATCH V2 2/2] i.MX6: mx6qsabrelite: Add splash screen support
Eric Nelson
- [U-Boot] [PATCH] mx51evk: Add CONFIG_REVISION_TAG
Fabio Estevam
- [U-Boot] using initrd with U-boot on the imx28evk
Bill
- [U-Boot] [PATCH] mx51evk: Add CONFIG_REVISION_TAG
Fabio Estevam
- [U-Boot] [PATCH] am33xx: Fix fetching of mmc1 bootmode from bootrom for AM33XX
Joel A Fernandes
- [U-Boot] [PATCH] mx51evk: Add CONFIG_REVISION_TAG
Stefano Babic
- [U-Boot] [PATCH] mx51evk: Add CONFIG_REVISION_TAG
Stefano Babic
- [U-Boot] [PATCH V2 2/2] i.MX6: mx6qsabrelite: Add splash screen support
Stefano Babic
- [U-Boot] Please pull u-boot-mmc.git
Tom Rini
- [U-Boot] Please pull u-boot-ubi/master
Tom Rini
- [U-Boot] [PATCH v2] mx51evk: Add CONFIG_REVISION_TAG
Benoît Thébaudeau
- [U-Boot] Pull request - microblaze
Tom Rini
- [U-Boot] [PULL] Please pull u-boot-avr32/master
Tom Rini
- [U-Boot] Pull request: u-boot-mips/master
Tom Rini
- [U-Boot] Pull request: u-boot-fdt
Tom Rini
- [U-Boot] [i2c] Pull request
Tom Rini
- [U-Boot] Cache alignment warnings on Tegra (ARM)
Thierry Reding
- [U-Boot] [GIT PULL] mpc83xx: mpc8308rdb enhancements
Tom Rini
- [U-Boot] Weekly status
Tom Rini
- [U-Boot] [PATCH v2] mx51evk: Add CONFIG_REVISION_TAG
Fabio Estevam
- [U-Boot] [PATCH V2 2/2] i.MX6: mx6qsabrelite: Add splash screen support
Eric Nelson
- [U-Boot] [PATCH] mx51evk: Add CONFIG_REVISION_TAG
Benoît Thébaudeau
- [U-Boot] [PATCH] mx51evk: Add CONFIG_REVISION_TAG
Fabio Estevam
- [U-Boot] Pull request: nand flash
Tom Rini
- [U-Boot] [PATCH 00/71] serial: Massive rework of the serial subsystem
Tom Rini
- [U-Boot] [PATCH 62/71] serial: spl: Implement empty functions for SPL
Tom Rini
- [U-Boot] [RFC] mx6qsabresd: Add Ethernet support
Fabio Estevam
- [U-Boot] [PATCH 00/71] serial: Massive rework of the serial subsystem
Marek Vasut
- [U-Boot] [PATCH 62/71] serial: spl: Implement empty functions for SPL
Marek Vasut
- [U-Boot] using initrd with U-boot on the imx28evk
Wolfgang Denk
- [U-Boot] [PATCH 08/71] serial: Implement serial_initfunc() macro
Tom Rini
- [U-Boot] [PATCH v3 00/11] S3C24XX: Add support to MINI2416 board
José Miguel Gonçalves
- [U-Boot] [PATCH v3 01/11] Add configuration option to select printf() inclusion on SPL
José Miguel Gonçalves
- [U-Boot] [PATCH v3 02/11] S3C24XX: Add core support for Samsung's S3C24XX SoCs
José Miguel Gonçalves
- [U-Boot] [PATCH v3 03/11] serial: Add support to 4 ports in serial_s3c24x0
José Miguel Gonçalves
- [U-Boot] [PATCH v3 04/11] serial: Use a more precise baud rate generation for serial_s3c24x0
José Miguel Gonçalves
- [U-Boot] [PATCH v3 05/11] serial: Remove unnecessary delay in serial_s3c24x0
José Miguel Gonçalves
- [U-Boot] [PATCH v3 06/11] rtc: Improve rtc_get() on s3c24x0_rtc
José Miguel Gonçalves
- [U-Boot] [PATCH v3 07/11] rtc: Fix rtc_reset() on s3c24x0_rtc
José Miguel Gonçalves
- [U-Boot] [PATCH v3 08/11] rtc: Don't allow setting unsuported years on s3c24x0_rtc
José Miguel Gonçalves
- [U-Boot] [PATCH v3 09/11] S3C24XX: Add NAND Flash driver
José Miguel Gonçalves
- [U-Boot] [PATCH v3 10/11] Add u-boot-pad.bin target to the Makefile
José Miguel Gonçalves
- [U-Boot] [PATCH v3 11/11] S3C24XX: Add support to MINI2416 board
José Miguel Gonçalves
- [U-Boot] [PATCH 62/71] serial: spl: Implement empty functions for SPL
Scott Wood
- [U-Boot] [PATCH 62/71] serial: spl: Implement empty functions for SPL
Tom Rini
- [U-Boot] [PATCH 08/71] serial: Implement serial_initfunc() macro
Marek Vasut
- [U-Boot] [PATCH 62/71] serial: spl: Implement empty functions for SPL
Marek Vasut
- [U-Boot] [PATCH v3 09/11] S3C24XX: Add NAND Flash driver
Scott Wood
- [U-Boot] [PATCH 62/71] serial: spl: Implement empty functions for SPL
Marek Vasut
- [U-Boot] [PATCH] net: sh_eth: Add support R8A7740 of rmobile (arm core)
Joe Hershberger
- [U-Boot] [PATCH] ext4: cache-align buffers so the invalidation works
Stephen Warren
- [U-Boot] [PATCH 62/71] serial: spl: Implement empty functions for SPL
Tom Rini
- [U-Boot] [PATCH 1/2] patman: Use reverse order for changelog
Simon Glass
- [U-Boot] [PATCH v2 13/13] mxc nand: Add support for i.MX5
Tom Rini
- [U-Boot] [PATCH v3] FAT: Make it possible to read from any file position
Benoît Thébaudeau
- [U-Boot] [PATCH v3 09/11] S3C24XX: Add NAND Flash driver
José Miguel Gonçalves
- [U-Boot] Cache alignment warnings on Tegra (ARM)
Simon Glass
- [U-Boot] [PATCH 62/71] serial: spl: Implement empty functions for SPL
Marek Vasut
- [U-Boot] [PATCH 62/71] serial: spl: Implement empty functions for SPL
Scott Wood
- [U-Boot] [PATCH v3 09/11] S3C24XX: Add NAND Flash driver
Scott Wood
- [U-Boot] [PATCH 62/71] serial: spl: Implement empty functions for SPL
Marek Vasut
- [U-Boot] [PATCH 62/71] serial: spl: Implement empty functions for SPL
Tom Rini
- [U-Boot] Cache alignment warnings on Tegra (ARM)
Marek Vasut
- [U-Boot] [PATCH 62/71] serial: spl: Implement empty functions for SPL
Tom Rini
- [U-Boot] [PATCH v3 09/11] S3C24XX: Add NAND Flash driver
José Miguel Gonçalves
- [U-Boot] [PATCH 62/71] serial: spl: Implement empty functions for SPL
Marek Vasut
- [U-Boot] Cache alignment warnings on Tegra (ARM)
Thierry Reding
- [U-Boot] [PATCH v2 5/8] FAT: Fix file contents listed as directory
Tom Rini
- [U-Boot] [U-Boot, 1/3] dm: sparc: net: Fixup greth compile warnings
Tom Rini
- [U-Boot] [U-Boot, 2/3] dm: sparc: common: Fixup cmd_bdinfo warnings
Tom Rini
- [U-Boot] [U-Boot, 3/3] dm: sparc: Fixup the compile warnings in sparc code
Tom Rini
- [U-Boot] spl: remove forced linking of commands into SPL
Tom Rini
- [U-Boot] [U-Boot, 1/5] fw_env: Add env vars describing U-Boot target board
Tom Rini
- [U-Boot] [U-Boot,2/5] env_common: Add missing ethprime
Tom Rini
- [U-Boot] [U-Boot, 3/5] env import/export: Remove from help if disabled
Tom Rini
- [U-Boot] [U-Boot, v4, 1/7] env: cosmetic: drop assignment i = iomux_doenv()
Tom Rini
- [U-Boot] [U-Boot,1/2,V2] ARM: Remove apollon board
Tom Rini
- [U-Boot] [U-Boot,2/2] IPL: Remove remains of OneNAND IPL
Tom Rini
- [U-Boot] env_nand: fix incorrect size parameter to ALLOC_CACHE_ALIGN_BUFFER
Tom Rini
- [U-Boot] Subject: [PATCH] Fix for bug in memory sizing code
Tom Rini
- [U-Boot] env_nand: fix incorrect size parameter to ALLOC_CACHE_ALIGN_BUFFER
Tom Rini
- [U-Boot] [PATCH 62/71] serial: spl: Implement empty functions for SPL
Marek Vasut
- [U-Boot] Cache alignment warnings on Tegra (ARM)
Marek Vasut
- [U-Boot] [U-Boot,1/2,V2] ARM: Remove apollon board
Marek Vasut
- [U-Boot] [PATCH v2 1/4] nand: Add support for unlock.invert
Joe Hershberger
- [U-Boot] [PATCH 62/71] serial: spl: Implement empty functions for SPL
Scott Wood
- [U-Boot] [U-Boot, 1/3] dm: sparc: net: Fixup greth compile warnings
Marek Vasut
- [U-Boot] [PATCH 62/71] serial: spl: Implement empty functions for SPL
Tom Rini
- [U-Boot] [PATCH 62/71] serial: spl: Implement empty functions for SPL
Marek Vasut
- [U-Boot] [PATCH 62/71] serial: spl: Implement empty functions for SPL
Marek Vasut
- [U-Boot] [PATCH] AM335X: Set fdt_high for AM335X devices to enable booting with Device Tree
Vaibhav Hiremath
- [U-Boot] [PATCH] mx6qsabresd: Add 8-bit USDHC support
Fabio Estevam
- [U-Boot] [PATCH 1/9] Tegra: T30: Add include files
Simon Glass
- [U-Boot] Cache alignment warnings on Tegra (ARM)
Thierry Reding
- [U-Boot] Cache alignment warnings on Tegra (ARM)
Marek Vasut
- [U-Boot] [PATCH 2/9] Tegra: T30: Add AVP (arm720t) files
Simon Glass
- [U-Boot] [PATCH 4/9] Tegra: T30: Add common Tegra30 CPU files
Simon Glass
- [U-Boot] [PATCH 1/2] net: Allow netconsole settings to change after nc_start
Joe Hershberger
- [U-Boot] [PATCH 6/9] Tegra30: Add Cardhu board files
Simon Glass
- [U-Boot] [PATCH 7/9] Tegra30: Add config files (common and Cardhu)
Simon Glass
- [U-Boot] [PATCH] P4080/esdhc: make the P4080 ESDHC13 errata workaround conditional
Roy Zang
- [U-Boot] [PATCH 8/9] Tegra30: Add common pinmux config in board_early_init_f
Simon Glass
- [U-Boot] [PATCH 0/2] net: Netconsole port configuration and filtering
Joe Hershberger
- [U-Boot] [PATCH 1/2] net: Allow netconsole settings to change after nc_start
Joe Hershberger
- [U-Boot] [PATCH 2/2] net: Filter incoming netconsole packets by IP
Joe Hershberger
- [U-Boot] Cache alignment warnings on Tegra (ARM)
Thierry Reding
- [U-Boot] Cache alignment warnings on Tegra (ARM)
Simon Glass
- [U-Boot] [PATCH 62/71] serial: spl: Implement empty functions for SPL
Tom Rini
- [U-Boot] [PATCH v3 09/11] S3C24XX: Add NAND Flash driver
Scott Wood
- [U-Boot] [PATCH 1/9] Tegra: T30: Add include files
Tom Warren
- [U-Boot] [PATCH 62/71] serial: spl: Implement empty functions for SPL
Marek Vasut
- [U-Boot] [PATCH 2/9] Tegra: T30: Add AVP (arm720t) files
Tom Warren
- [U-Boot] Cache alignment warnings on Tegra (ARM)
Marek Vasut
- [U-Boot] Cache alignment warnings on Tegra (ARM)
Marek Vasut
- [U-Boot] [PATCH 7/9] Tegra30: Add config files (common and Cardhu)
Tom Warren
- [U-Boot] [GIT PULL] mpc83xx: mpc8308rdb enhancements
Kim Phillips
- [U-Boot] [PATCH 2/2] Add unlzo command
Joe Hershberger
- [U-Boot] [PATCH 8/9] Tegra30: Add common pinmux config in board_early_init_f
Tom Warren
- [U-Boot] [PATCH 62/71] serial: spl: Implement empty functions for SPL
Scott Wood
- [U-Boot] [PATCH 8/9] Tegra30: Add common pinmux config in board_early_init_f
Stephen Warren
- [U-Boot] [PATCH 62/71] serial: spl: Implement empty functions for SPL
Marek Vasut
- [U-Boot] [PATCH V3 0/8] disk: "part" command and dependencies
Stephen Warren
- [U-Boot] [PATCH V3 1/8] disk: parameterize get_device_and_partition's loop count
Stephen Warren
- [U-Boot] [PATCH V3 2/8] disk: fix get_device_and_partition() bootable search
Stephen Warren
- [U-Boot] [PATCH V3 3/8] disk: introduce get_device()
Stephen Warren
- [U-Boot] [PATCH V3 4/8] disk: get_device_and_partition() enhancements
Stephen Warren
- [U-Boot] [PATCH V3 5/8] disk: part_efi: range-check partition number
Stephen Warren
- [U-Boot] [PATCH V3 6/8] disk: part_efi: parse and store partition UUID
Stephen Warren
- [U-Boot] [PATCH V3 7/8] disk: part_msdos: parse and store partition UUID
Stephen Warren
- [U-Boot] [PATCH V3 8/8] cmd_part: add partition-related command
Stephen Warren
- [U-Boot] Cache alignment warnings on Tegra (ARM)
Simon Glass
- [U-Boot] Cache alignment warnings on Tegra (ARM)
Marek Vasut
- [U-Boot] [PATCHv4] [RFC] DM: early_malloc for DM added.
Graeme Russ
- [U-Boot] [GIT PULL] mpc83xx: mpc8308rdb enhancements
Tom Rini
- [U-Boot] [PATCHv4] [RFC] DM: early_malloc for DM added.
Graeme Russ
- [U-Boot] [PATCHv4] [RFC] DM: early_malloc for DM added.
Marek Vasut
- [U-Boot] [PATCH] README.commands: Document what UNDEF_SYM does
Tom Rini
- [U-Boot] [PATCHv4] [RFC] DM: early_malloc for DM added.
Graeme Russ
- [U-Boot] [PATCH 41/71] serial: arm: Implement CONFIG_SERIAL_MULTI into atmel serial driver
Andreas Bießmann
- [RFC PATCH] i.MX6: add meaningful constant names for CCGRx bitfields
Eric Nelson
- [U-Boot] [PATCHv4] [RFC] DM: early_malloc for DM added.
Marek Vasut
- [U-Boot] Cleanup of CCGR registers (was [PATCH V2 2/2] i.MX6: mx6qsabrelite: Add splash screen support)
Eric Nelson
- [U-Boot] (no subject)
Troy Kisky
- [U-Boot] [PATCH 01/11] imximage: make header variable length
Troy Kisky
- [U-Boot] [PATCH 02/11] imximage: check dcd_len as entries added
Troy Kisky
- [U-Boot] [PATCH 03/11] imximage: enable word writes for version2 header
Troy Kisky
- [U-Boot] [PATCH 04/11] imximage: cleanup parsing
Troy Kisky
- [U-Boot] [PATCH 05/11] imximage: add expression evaluation
Troy Kisky
- [U-Boot] [PATCH 06/11] imximage: add plugin commands
Troy Kisky
- [U-Boot] [PATCH 07/11] imximage.cfg: run files through C preprocessor
Troy Kisky
- [U-Boot] [PATCH 08/11] mx6: add plugin file for use with imximage.cfg
Troy Kisky
- [U-Boot] [PATCH 09/11] mx6qsabrelite: imximage.cfg: use symbols instead of hardcoded constants
Troy Kisky
- [U-Boot] [PATCH 10/11] mx6qsabrelite: imximage.cfg: allow plugin to work
Troy Kisky
- [U-Boot] [PATCH 11/11] RFC mx6qsabrelite: imximage.cfg: enable plugin mode
Troy Kisky
- [U-Boot] [RFC] mx6qsabresd: Add Ethernet support
Kim Phillips
- [U-Boot] [PATCH V3 2/8] disk: fix get_device_and_partition() bootable search
Rob Herring
- [U-Boot] [PATCH V3 3/8] disk: introduce get_device()
Rob Herring
- [U-Boot] [PATCH V3 3/8] disk: introduce get_device()
Rob Herring
- [U-Boot] [PATCH] i.MX6: get rid of redundant struct src_regs (dupe of struct src)
Eric Nelson
- [U-Boot] [PATCH 08/11] mx6: add plugin file for use with imximage.cfg
Troy Kisky
- [U-Boot] [PATCH] i.MX6: get rid of redundant struct src_regs (dupe of struct src)
Troy Kisky
- [U-Boot] [PATCH 11/11] RFC mx6qsabrelite: imximage.cfg: enable plugin mode
Troy Kisky
- [U-Boot] [PATCH] Exynos5250: Enable PXE Support
Minkyu Kang
- [U-Boot] [RFC] mx6qsabresd: Add Ethernet support
Fabio Estevam
- [U-Boot] [PATCH] mx6qsabresd: Add Ethernet support
Fabio Estevam
- [U-Boot] Cache alignment warnings on Tegra (ARM)
Thierry Reding
- [U-Boot] Cache alignment warnings on Tegra (ARM)
Thierry Reding
- [U-Boot] [PATCH 62/71] serial: spl: Implement empty functions for SPL
Stefan Roese
- [U-Boot] Cleanup of CCGR registers (was [PATCH V2 2/2] i.MX6: mx6qsabrelite: Add splash screen support)
Stefano Babic
- [U-Boot] [PATCH]powerpc/mpc8xxx: Fix USB device-tree fixup
Ramneek Mehresh
- [U-Boot] Info about cache test at uboot prompt.
naveen yadav
- [U-Boot] [PATCH v3 3/6] arm:exynos4:pinmux: Modify the gpio function for mmc
Jaehoon Chung
- [U-Boot] [PATCH v3 1/6] arm:exynos4:trats: Correct SDRAM configuration for trats
Jaehoon Chung
- [U-Boot] [PATCH 1/2] tegra: Update Avionic Design vendor prefix
Thierry Reding
- [U-Boot] [PATCH 2/2] tegra: Rename Medcom to Medcom-Wide
Thierry Reding
- [U-Boot] [PATCH v3 4/6] arm:exynos4:trats: Use pinmux for mmc configuration
Jaehoon Chung
- [U-Boot] [PATCH 1/4 v3] serial: Add Zynq serial driver
Michal Simek
- [U-Boot] [PATCH 1/4 v3] serial: Add Zynq serial driver
Marek Vasut
- [U-Boot] [PATCH 1/4 v3] serial: Add Zynq serial driver
Michal Simek
- [U-Boot] Removal of IOP480 support
Stefan Roese
- [U-Boot] [PATCH 27/71] serial: powerpc: Implement CONFIG_SERIAL_MULTI into iop480 serial driver
Stefan Roese
- [U-Boot] [PATCH 31/71] serial: powerpc: Implement CONFIG_SERIAL_MULTI into amirix serial driver
Stefan Roese
- [U-Boot] [PATCH 32/71] serial: powerpc: Implement CONFIG_SERIAL_MULTI into bmw serial driver
Stefan Roese
- [U-Boot] [PATCH 36/71] serial: powerpc: Implement CONFIG_SERIAL_MULTI into ml2 serial driver
Stefan Roese
- [U-Boot] [PATCH v4 00/11] S3C24XX: Add support to MINI2416 board
José Miguel Gonçalves
- [U-Boot] [PATCH v4 01/11] Add configuration option to select printf() inclusion on SPL
José Miguel Gonçalves
- [U-Boot] [PATCH v4 02/11] S3C24XX: Add core support for Samsung's S3C24XX SoCs
José Miguel Gonçalves
- [U-Boot] [PATCH v4 03/11] serial: Add support to 4 ports in serial_s3c24x0
José Miguel Gonçalves
- [U-Boot] [PATCH v4 04/11] serial: Use a more precise baud rate generation for serial_s3c24x0
José Miguel Gonçalves
- [U-Boot] [PATCH v4 05/11] serial: Remove unnecessary delay in serial_s3c24x0
José Miguel Gonçalves
- [U-Boot] [PATCH v4 06/11] rtc: Improve rtc_get() on s3c24x0_rtc
José Miguel Gonçalves
- [U-Boot] [PATCH v4 07/11] rtc: Fix rtc_reset() on s3c24x0_rtc
José Miguel Gonçalves
- [U-Boot] [PATCH v4 08/11] rtc: Don't allow setting unsuported years on s3c24x0_rtc
José Miguel Gonçalves
- [U-Boot] [PATCH v4 09/11] S3C24XX: Add NAND Flash driver
José Miguel Gonçalves
- [U-Boot] [PATCH v4 10/11] Add u-boot-pad.bin target to the Makefile
José Miguel Gonçalves
- [U-Boot] [PATCH v4 11/11] S3C24XX: Add support to MINI2416 board
José Miguel Gonçalves
- [U-Boot] [PATCH 31/71] serial: powerpc: Implement CONFIG_SERIAL_MULTI into amirix serial driver
Marek Vasut
- [U-Boot] [PATCH 32/71] serial: powerpc: Implement CONFIG_SERIAL_MULTI into bmw serial driver
Marek Vasut
- [U-Boot] [PATCH 32/71] serial: powerpc: Implement CONFIG_SERIAL_MULTI into bmw serial driver
Stefan Roese
- [U-Boot] [PATCH] ppc4xx: Remove IOP480 support
Stefan Roese
- [U-Boot] Resets on mx6qsabrelite
Fabio Estevam
- [U-Boot] [PATCH v2 0/5] Exynos: Support for display drivers
Piotr Wilczek
- [U-Boot] [PATCH v2 1/5] misc:max8998 Add LDO macros
Piotr Wilczek
- [U-Boot] [PATCH v2 2/5] drivers: video: Add ld9040 video driver
Piotr Wilczek
- [U-Boot] [PATCH v2 3/5] arm: exynos4: cpu: Add definition for display
Piotr Wilczek
- [U-Boot] [PATCH v2 4/5] drivers: video: fix image position
Piotr Wilczek
- [U-Boot] [PATCH v2 5/5] arm: exynos4: universal_C210: add display support
Piotr Wilczek
- [U-Boot] [PATCH] ppc4xx: Remove ML2 board support
Stefan Roese
- [U-Boot] [PATCH] ppc4xx: Remove AP1000 board support
Stefan Roese
- [U-Boot] [PATCH] mpc82xx: Remove BMW board port
Stefan Roese
- [U-Boot] [PATCH] ppc4xx: Remove IOP480 support
Matthias Fuchs
- [U-Boot] Resets on mx6qsabrelite
Robert Nelson
- [U-Boot] Resets on mx6qsabrelite
Fabio Estevam
- [U-Boot] [PATCH] FAT: split block device interactions from filesystem logic
Pavel Herrmann
- [U-Boot] [PATCH v2 1/5] pci: fix errant data types and corresponding access functions
Kumar Gala
- [U-Boot] [PATCH] pci: fix some warnings related to assumptions about
Kumar Gala
- [U-Boot] [PATCH 1/3] mx53loco: Change default environment to cope with OE changes
Otavio Salvador
- [U-Boot] [PATCH 2/3] mx6qsabrelite: Change default environment to cope with OE changes
Otavio Salvador
- [U-Boot] [PATCH 3/3] mx6qsabresd: Change default environment to cope with OE changes
Otavio Salvador
- [U-Boot] arch/powerpc/lib/board.c:get_effective_memsize() for 4GB+ systems
Robert Thorhuus
- [U-Boot] [PATCH] ZFS: fix some warnings, cleanup
Pavel Herrmann
- [U-Boot] mkimage on Cygwin
Yuriy Dragunov
- [U-Boot] [PATCH v4 10/11] Add u-boot-pad.bin target to the Makefile
Scott Wood
- [U-Boot] [PATCH v4 09/11] S3C24XX: Add NAND Flash driver
Scott Wood
- [U-Boot] [PATCH v4 09/11] S3C24XX: Add NAND Flash driver
José Miguel Gonçalves
- [U-Boot] [PATCH v4 10/11] Add u-boot-pad.bin target to the Makefile
José Miguel Gonçalves
- [U-Boot] [PATCH v4 10/11] Add u-boot-pad.bin target to the Makefile
Scott Wood
- [U-Boot] [PATCH v4 10/11] Add u-boot-pad.bin target to the Makefile
Stephen Warren
- [U-Boot] [PATCH 2/2] tegra: Rename Medcom to Medcom-Wide
Stephen Warren
- [U-Boot] [PATCH V3 3/8] disk: introduce get_device()
Stephen Warren
- [U-Boot] [PATCH 1/4 v3] serial: Add Zynq serial driver
Tom Rini
- [U-Boot] [PATCH v4 10/11] Add u-boot-pad.bin target to the Makefile
José Miguel Gonçalves
- [U-Boot] [PATCH 32/71] serial: powerpc: Implement CONFIG_SERIAL_MULTI into bmw serial driver
Tom Rini
- [U-Boot] [PATCH 2/3] mx6qsabrelite: Change default environment to cope with OE changes
Robert Nelson
- [U-Boot] [PATCH 2/3] mx6qsabrelite: Change default environment to cope with OE changes
Otavio Salvador
- [U-Boot] [PATCH 2/3] mx6qsabrelite: Change default environment to cope with OE changes
Robert Nelson
- [U-Boot] Resets on mx6qsabrelite
Tom Rini
- [U-Boot] [PATCH V3 3/8] disk: introduce get_device()
Tom Rini
- [U-Boot] [PATCH] i.MX6: provide functional names for CCGRx bit fields
Eric Nelson
- [U-Boot] [PATCH v4 10/11] Add u-boot-pad.bin target to the Makefile
Tom Rini
- [U-Boot] [PATCH 2/3] mx6qsabrelite: Change default environment to cope with OE changes
Otavio Salvador
- [U-Boot] [PATCHv4] [RFC] DM: early_malloc for DM added.
Tom Rini
- [U-Boot] [PATCH 3/8] i.MX6: Add ANATOP_PFD_480 bitfield constants
Eric Nelson
- [U-Boot] [PATCH] i.MX6: define struct iomuxc and IOMUX_GPR2 register bitfields
Eric Nelson
- [U-Boot] [PATCH 6/8] i.MX6: define bitfields for CHSCCDR register
Eric Nelson
- [U-Boot] [PATCH v4 10/11] Add u-boot-pad.bin target to the Makefile
Scott Wood
- [U-Boot] [PATCH v4 10/11] Add u-boot-pad.bin target to the Makefile
José Miguel Gonçalves
- [U-Boot] [PATCH V3 1/1] i.MX6: mx6qsabrelite: Add splash screen support
Eric Nelson
- [U-Boot] [PATCH 62/71] serial: spl: Implement empty functions for SPL
Scott Wood
- [U-Boot] [PATCH v4 11/11] S3C24XX: Add support to MINI2416 board
Tom Rini
- [U-Boot] Resets on mx6qsabrelite
Marek Vasut
- [U-Boot] [PATCH 32/71] serial: powerpc: Implement CONFIG_SERIAL_MULTI into bmw serial driver
Marek Vasut
- [U-Boot] [PATCH 0/6] iPAQ h2200 support
Łukasz Dałek
- [U-Boot] [PATCH 1/6] h2200: Add support for iPAQ h2200
Łukasz Dałek
- [U-Boot] [PATCH 2/6] pxa25x: Add USB Ethernet driver
Łukasz Dałek
- [U-Boot] [PATCH 3/6] pxa: Add some stuff to examine cpu model and rev
Łukasz Dałek
- [U-Boot] [PATCH 4/6] usbether: Fixed bug when using with PXA25X chips
Łukasz Dałek
- [U-Boot] [PATCH 5/6] usbether: Define CONFIG_USB_ETH_{CDC,SUBSET}
Łukasz Dałek
- [U-Boot] [PATCH 6/6] usbether: Removed DEV_CONFIG_{CDC,SUBSET}
Łukasz Dałek
- [U-Boot] [PATCH] i.MX6: provide functional names for CCGRx bit fields
Eric Nelson
- [U-Boot] Resets on mx6qsabrelite
Fabio Estevam
- [U-Boot] [PATCH v4 10/11] Add u-boot-pad.bin target to the Makefile
Tom Rini
- [U-Boot] Resets on mx6qsabrelite
Tom Rini
- [U-Boot] [PATCH v4 11/11] S3C24XX: Add support to MINI2416 board
José Miguel Gonçalves
- [U-Boot] [PATCH v4 2/2] ARM: kirkwood/orion5x: Use reset_cpu definition in include/common.h
Prafulla Wadaskar
- [U-Boot] [PATCH] mx6qsabresd: Add Ethernet support
Kim Phillips
- [U-Boot] [PATCH V3 1/1] i.MX6: mx6qsabrelite: Add splash screen support
Eric Nelson
- [U-Boot] [PATCH 1/6] h2200: Add support for iPAQ h2200
Marek Vasut
- [U-Boot] [PATCH 2/6] pxa25x: Add USB Ethernet driver
Marek Vasut
- [U-Boot] [PATCH 3/6] pxa: Add some stuff to examine cpu model and rev
Marek Vasut
- [U-Boot] [PATCH] README.commands: Document what UNDEF_SYM does
Jeroen Hofstee
- [U-Boot] [PATCH] README.commands: Document what UNDEF_SYM does
Tom Rini
- [U-Boot] [PATCH 1/2] tegra: Update Avionic Design vendor prefix
Stephen Warren
- [U-Boot] [PATCH 2/6] pxa25x: Add USB Ethernet driver
Marek Vasut
- [U-Boot] [PATCH 1/6] h2200: Add support for iPAQ h2200
Marek Vasut
- [U-Boot] [PATCH 1/6] h2200: Add support for iPAQ h2200
Łukasz Dałek
- [U-Boot] [PATCH 1/6] h2200: Add support for iPAQ h2200
Marek Vasut
- [U-Boot] Hi , Request Port U-Boot
Farhad Arghavan
- [U-Boot] [PATCH 1/6] h2200: Add support for iPAQ h2200
Łukasz Dałek
- [U-Boot] [PATCH v2 1/3] mx53loco: Change default environment to cope with OE changes
Otavio Salvador
- [U-Boot] [PATCH v2 2/3] mx6qsabrelite: Change default environment to cope with OE changes
Otavio Salvador
- [U-Boot] [PATCH v2 3/3] mx6qsabresd: Change default environment to cope with OE changes
Otavio Salvador
- [U-Boot] [PATCH 32/71] serial: powerpc: Implement CONFIG_SERIAL_MULTI into bmw serial driver
Tom Rini
- [U-Boot] [PATCH v4 10/11] Add u-boot-pad.bin target to the Makefile
Scott Wood
- [U-Boot] [PATCH 1/6] h2200: Add support for iPAQ h2200
Marek Vasut
- [U-Boot] [PATCH 32/71] serial: powerpc: Implement CONFIG_SERIAL_MULTI into bmw serial driver
Marek Vasut
- [U-Boot] [PATCH 32/71] serial: powerpc: Implement CONFIG_SERIAL_MULTI into bmw serial driver
Graeme Russ
- [U-Boot] [PATCH] ppc4xx: Remove IOP480 support
Marek Vasut
- [U-Boot] [PATCH 1/6] h2200: Add support for iPAQ h2200
Łukasz Dałek
- [U-Boot] [PATCH] mpc82xx: Remove BMW board port
Marek Vasut
- [U-Boot] [PATCH] ppc4xx: Remove AP1000 board support
Marek Vasut
- [U-Boot] [PATCH] ppc4xx: Remove ML2 board support
Marek Vasut
- [U-Boot] [PATCH 1/6] h2200: Add support for iPAQ h2200
Marek Vasut
- [U-Boot] [PATCH 32/71] serial: powerpc: Implement CONFIG_SERIAL_MULTI into bmw serial driver
Marek Vasut
- [U-Boot] [PATCH 32/71] serial: powerpc: Implement CONFIG_SERIAL_MULTI into bmw serial driver
Scott Wood
- [U-Boot] [PATCH 32/71] serial: powerpc: Implement CONFIG_SERIAL_MULTI into bmw serial driver
Graeme Russ
- [U-Boot] [PATCH 32/71] serial: powerpc: Implement CONFIG_SERIAL_MULTI into bmw serial driver
Marek Vasut
- [U-Boot] [PATCH 32/71] serial: powerpc: Implement CONFIG_SERIAL_MULTI into bmw serial driver
Graeme Russ
- [U-Boot] [PATCH 1/6] h2200: Add support for iPAQ h2200
Łukasz Dałek
- [U-Boot] [PATCH 32/71] serial: powerpc: Implement CONFIG_SERIAL_MULTI into bmw serial driver
Marek Vasut
- [U-Boot] [PATCH 32/71] serial: powerpc: Implement CONFIG_SERIAL_MULTI into bmw serial driver
Marek Vasut
- [U-Boot] [PATCH 1/6] h2200: Add support for iPAQ h2200
Marek Vasut
- [U-Boot] [PATCH 32/71] serial: powerpc: Implement CONFIG_SERIAL_MULTI into bmw serial driver
Scott Wood
- [U-Boot] [PATCH 0/6] iPAQ h2200 support
Marek Vasut
- [U-Boot] [PATCH 32/71] serial: powerpc: Implement CONFIG_SERIAL_MULTI into bmw serial driver
Marek Vasut
- [U-Boot] [PATCH 32/71] serial: powerpc: Implement CONFIG_SERIAL_MULTI into bmw serial driver
Tom Rini
- [U-Boot] [PATCH 1/6] h2200: Add support for iPAQ h2200
Łukasz Dałek
- [U-Boot] [PATCH 1/6] h2200: Add support for iPAQ h2200
Marek Vasut
- [U-Boot] [PATCH v4 10/11] Add u-boot-pad.bin target to the Makefile
Tom Rini
- [U-Boot] [PATCH 1/6] h2200: Add support for iPAQ h2200
Łukasz Dałek
- [U-Boot] [PATCH v4 10/11] Add u-boot-pad.bin target to the Makefile
Scott Wood
- [U-Boot] [PATCH 2/3] mx6qsabrelite: Change default environment to cope with OE changes
Eric Nelson
- [U-Boot] [PATCH v4 10/11] Add u-boot-pad.bin target to the Makefile
Tom Rini
- [U-Boot] [PATCH 1/6] h2200: Add support for iPAQ h2200
Marek Vasut
- [U-Boot] [PATCH 2/3] mx6qsabrelite: Change default environment to cope with OE changes
Otavio Salvador
- [U-Boot] [PATCH 1/6] h2200: Add support for iPAQ h2200
Łukasz Dałek
- [U-Boot] [PATCH 1/6] h2200: Add support for iPAQ h2200
Marek Vasut
- [U-Boot] [PATCH v4 10/11] Add u-boot-pad.bin target to the Makefile
José Miguel Gonçalves
- [U-Boot] [PATCH 2/3] mx6qsabrelite: Change default environment to cope with OE changes
Eric Nelson
- [U-Boot] [PATCH 2/3] mx6qsabrelite: Change default environment to cope with OE changes
Otavio Salvador
- [U-Boot] [PATCH v4 10/11] Add u-boot-pad.bin target to the Makefile
Tom Rini
- [U-Boot] [PATCH 2/3] mx6qsabrelite: Change default environment to cope with OE changes
Eric Nelson
- [U-Boot] [PATCH 2/3] mx6qsabrelite: Change default environment to cope with OE changes
Otavio Salvador
- [U-Boot] [ARM] resuming activity
Albert ARIBAUD
- [U-Boot] [PATCH 1/6] h2200: Add support for iPAQ h2200
Joe Hershberger
- [U-Boot] [PATCH 0/6] iPAQ h2200 support
Andreas Bießmann
- [U-Boot] [PATCH 3/8] i.MX6: Add ANATOP_PFD_480 bitfield constants
Stefano Babic
- [U-Boot] [PATCH] i.MX6: define struct iomuxc and IOMUX_GPR2 register bitfields
Stefano Babic
- [U-Boot] [PATCH v2 1/3] mx53loco: Change default environment to cope with OE changes
Stefano Babic
- [U-Boot] QE firmware/microcode handling
Gerlando Falauto
- [U-Boot] [PATCH v2 0/5] Exynos: Support for display drivers
Jaehoon Chung
- [U-Boot] [PATCH v2 2/5] drivers: video: Add ld9040 video driver
Jaehoon Chung
- [U-Boot] [PATCH v4 0/6] Code cleaup for trats and universal
Piotr Wilczek
- [U-Boot] [PATCH v4 1/6] arm:exynos4:trats: Correct SDRAM configuration for trats
Piotr Wilczek
- [U-Boot] [PATCH v4 2/6] arm:exynos4:trats: Fix SDRAM size
Piotr Wilczek
- [U-Boot] [PATCH v4 3/6] arm:exynos4:pinmux: Modify the gpio function for mmc
Piotr Wilczek
- [U-Boot] [PATCH v4 4/6] arm:exynos4:trats: Use pinmux for mmc configuration
Piotr Wilczek
- [U-Boot] [PATCH v4 5/6] arm:exynos4:universal: Use pinmux for mmc configuration
Piotr Wilczek
- [U-Boot] [PATCH v4 6/6] arm:exynos4:universal: Eliminated low level init
Piotr Wilczek
- [U-Boot] [PATCH v2 0/5] Exynos: Support for display drivers
Piotr Wilczek
- [U-Boot] [PATCH v2] implement software SPI
Piotr Wilczek
- [U-Boot] [PATCH v2] arm:exynos4:universal_c210: implement software SPI
Piotr Wilczek
- [U-Boot] [PATCH 1/6] h2200: Add support for iPAQ h2200
Marek Vasut
- [U-Boot] Please pull u-boot-coldfire/master
Jin Zhengxiong-R64188
- [U-Boot] QE firmware/microcode handling
Wolfgang Denk
- [U-Boot] [PATCH v2] implement software SPI
Wolfgang Denk
- [U-Boot] QE firmware/microcode handling
Timur Tabi
- [U-Boot] Fwd: Re: [PATCH] mx6: Remove lowlevel_init.S
Ashok Kumar Reddy
- [U-Boot] [PATCH v4 10/11] Add u-boot-pad.bin target to the Makefile
Tom Warren
- [U-Boot] [PATCH v2] README.commands: Document what UNDEF_SYM does
Tom Rini
- [U-Boot] [PATCH 1/2] tegra: Update Avionic Design vendor prefix
Tom Warren
- [U-Boot] [PATCH v4 10/11] Add u-boot-pad.bin target to the Makefile
Tom Rini
- [U-Boot] [PATCH v4 10/11] Add u-boot-pad.bin target to the Makefile
Tom Warren
- [U-Boot] Please pull u-boot-coldfire/master
Tom Rini
- [U-Boot] Request for Kirkwood new Marvell MMC Driver mainline
DrEagle
- [U-Boot] arch/powerpc/lib/board.c:get_effective_memsize() for 4GB+ systems
Kumar Gala
- [U-Boot] [PATCH V3 1/1] i.MX6: mx6qsabrelite: Add splash screen support
Eric Nelson
- [U-Boot] [PATCH v4 10/11] Add u-boot-pad.bin target to the Makefile
Scott Wood
- [U-Boot] QE firmware/microcode handling
Scott Wood
- [U-Boot] [PATCH V5 1/2] ext4fs ls load support
Tom Rini
- [U-Boot] ext4 support is now merged
Tom Rini
- [U-Boot] [PATCH] ext4: cache-align buffers so the invalidation works
Tom Rini
- [U-Boot] [PATCH] ARM: tegra: define CONFIG_SYS_BOOTMAPSZ
Stephen Warren
- [U-Boot] [PATCH v7 3/4] OMAP: networking support for SPL
Joe Hershberger
- [U-Boot] [PATCH 00/11] Add DM blockdev subsystem
Pavel Herrmann
- [U-Boot] [PATCH 01/11] DM: add block device core
Pavel Herrmann
- [U-Boot] [PATCH 02/11] DM: add support for scanning DOS partitions to blockdev core
Pavel Herrmann
- [U-Boot] [PATCH 03/11] DM: add block controller core
Pavel Herrmann
- [U-Boot] [PATCH 04/11] DM: add sata_legacy driver for blockctrl
Pavel Herrmann
- [U-Boot] [PATCH 05/11] DM: add ata and partition blockdev drivers
Pavel Herrmann
- [U-Boot] [PATCH 06/11] DM: add cmd_block command
Pavel Herrmann
- [U-Boot] [PATCH 07/11] DM: use new blockdev API in FAT
Pavel Herrmann
- [U-Boot] [PATCH 08/11] DM: use new blockdev API in ext2
Pavel Herrmann
- [U-Boot] [PATCH 09/11] DM: use new blockdev API in reiserfs
Pavel Herrmann
- [U-Boot] [PATCH 10/11] DM: use new blockdev API in ZFS
Pavel Herrmann
- [U-Boot] [PATCH 11/11] DM: switch sandbox to DM blockdev
Pavel Herrmann
- [U-Boot] [PATCH 01/11] DM: add block device core
Marek Vasut
- [U-Boot] [PATCH 02/11] DM: add support for scanning DOS partitions to blockdev core
Marek Vasut
- [U-Boot] [PATCH 03/11] DM: add block controller core
Marek Vasut
- [U-Boot] arch/powerpc/lib/board.c:get_effective_memsize() for 4GB+ systems
Robert Thorhuus
- [U-Boot] [U-Boot-DM] [PATCH 01/11] DM: add block device core
Vikram Narayanan
- [U-Boot] Request for Kirkwood new Marvell MMC Driver mainline
Andreas Bießmann
- [U-Boot] QE firmware/microcode handling
Timur Tabi
- [U-Boot] [PULL] u-boot-usb/master
Marek Vasut
- [U-Boot] Please pull u-boot-tegra/master into ARM/master
Albert ARIBAUD
- [U-Boot] [PATCH] ARM: tegra: use standard variables to define load addresses
Stephen Warren
- [U-Boot] arch/powerpc/lib/board.c:get_effective_memsize() for 4GB+ systems
Tabi Timur-B04825
- [U-Boot] [GIT PULL] Pull request: u-boot-imx
Albert ARIBAUD
- [U-Boot] [PATCH] ARM: tegra: use standard variables to define load addresses
Simon Glass
- [U-Boot] Please pull u-boot-ti/master
Tom Rini
- [U-Boot] [PATCH v4 10/11] Add u-boot-pad.bin target to the Makefile
José Miguel Gonçalves
- [U-Boot] [PATCH v4 3/6] arm:exynos4:pinmux: Modify the gpio function for mmc
Jaehoon Chung
- [U-Boot] QE firmware/microcode handling
McClintock Matthew-B29882
- [U-Boot] [PATCH v4 10/11] Add u-boot-pad.bin target to the Makefile
Wolfgang Denk
- [U-Boot] [PATCH 1/3] mmc: sdhci: increase the timeout value for data transfer
Jaehoon Chung
- [U-Boot] [PATCH 2/3] mmc: sdhci: add the DMA select for SDMA
Jaehoon Chung
- [U-Boot] [PATCH 3/3] mmc: sdhci: Add a quirk to add delay during completion of sdhci_send_cmd
Jaehoon Chung
- [U-Boot] [PATCH v4 3/6] arm:exynos4:pinmux: Modify the gpio function for mmc
Jaehoon Chung
- [U-Boot] [U-Boot-DM] [PATCH 01/11] DM: add block device core
Pavel Herrmann
- [U-Boot] [PATCH 01/11] DM: add block device core
Pavel Herrmann
- [U-Boot] [PATCH 03/11] DM: add block controller core
Pavel Herrmann
- [U-Boot] [PATCH 02/11] DM: add support for scanning DOS partitions to blockdev core
Pavel Herrmann
- [U-Boot] [PATCH v2] implement software SPI
Piotr Wilczek
- [U-Boot] [PATCH v4 10/11] Add u-boot-pad.bin target to the Makefile
José Miguel Gonçalves
- [U-Boot] [PATCH] SBx81CFC960: embed Fman microcode in the bootloader
judge.packham at gmail.com
- [U-Boot] [PATCH 1/3] mmc: sdhci: increase the timeout value for data transfer
Rommel Custodio
- [U-Boot] [PATCH 0/1] Add Marvell SDIO/MMC driver for Kirkwood SoC
DrEagle
- [U-Boot] [PATCH 1/1] Add Marvell SDIO/MMC driver for Kirkwood SoC
DrEagle
- [U-Boot] [PATCH 0/4] Marvell SDIO/MMC driver for Sheevaplug
DrEagle
- [U-Boot] [PATCH 1/4] Add Marvell SDIO/MMC driver for Kirkwood SoC
DrEagle
- [U-Boot] [PATCH 2/4] Add SDIO/MMC support for kirkwood SoC
DrEagle
- [U-Boot] [PATCH 3/4] Add SDIO/MMC support for Sheevaplug board
DrEagle
- [U-Boot] [PATCH 4/4] Fix env address for Sheevaplug board
DrEagle
- [U-Boot] arch/powerpc/lib/board.c:get_effective_memsize() for 4GB+ systems
Robert Thorhuus
- [U-Boot] Subject: [PATCH] Fix for bug in memory sizing code
Gerlando Falauto
- [U-Boot] [PATCH] SBx81CFC960: embed Fman microcode in the bootloader
Tabi Timur-B04825
- [U-Boot] arch/powerpc/lib/board.c:get_effective_memsize() for 4GB+ systems
Tabi Timur-B04825
- [U-Boot] arch/powerpc/lib/board.c:get_effective_memsize() for 4GB+ systems
Robert Thorhuus
- [U-Boot] [PATCH 01/11] DM: add block device core
Marek Vasut
- [U-Boot] [U-Boot-DM] [PATCH 01/11] DM: add block device core
Marek Vasut
- [U-Boot] [PATCH 02/11] DM: add support for scanning DOS partitions to blockdev core
Marek Vasut
- [U-Boot] arch/powerpc/lib/board.c:get_effective_memsize() for 4GB+ systems
Kumar Gala
- [U-Boot] [PATCH 03/11] DM: add block controller core
Marek Vasut
- [U-Boot] [PATCH V3 3/8] disk: introduce get_device()
Rob Herring
- [U-Boot] [PATCH] mx28evk: Add missing 'setexpr' command
Otavio Salvador
- [U-Boot] [PATCH v2 1/3] mx53loco: Change default environment to cope with OE changes
Otavio Salvador
- [U-Boot] [PATCH 03/11] DM: add block controller core
Pavel Herrmann
- [U-Boot] [PATCH 02/11] DM: add support for scanning DOS partitions to blockdev core
Pavel Herrmann
- [U-Boot] arch/powerpc/lib/board.c:get_effective_memsize() for 4GB+ systems
Robert Thorhuus
- [U-Boot] [PATCH 01/11] DM: add block device core
Pavel Herrmann
- [U-Boot] arch/powerpc/lib/board.c:get_effective_memsize() for 4GB+ systems
Timur Tabi
- [U-Boot] arch/powerpc/lib/board.c:get_effective_memsize() for 4GB+ systems
Timur Tabi
- [U-Boot] [PATCH 03/11] DM: add block controller core
Pavel Herrmann
- [U-Boot] arch/powerpc/lib/board.c:get_effective_memsize() for 4GB+ systems
Robert Thorhuus
- [U-Boot] [PATCH 01/11] DM: add block device core
Marek Vasut
- [U-Boot] [PATCH 02/11] DM: add support for scanning DOS partitions to blockdev core
Marek Vasut
- [U-Boot] arch/powerpc/lib/board.c:get_effective_memsize() for 4GB+ systems
Robert Thorhuus
- [U-Boot] [PATCH 03/11] DM: add block controller core
Marek Vasut
- [U-Boot] [PATCH] mx6q: Add basic support for mx6qsabreauto
Fabio Estevam
- [U-Boot] [PATCH 03/11] DM: add block controller core
Marek Vasut
- [U-Boot] [PATCH] net/phy: support the mv88e6352 switch
Valentin Longchamp
- [U-Boot] [PATCH v2 1/9] combine block device load commands into common function
Rob Herring
- [U-Boot] [PATCH v2 3/9] disk/part: introduce get_device_and_partition
Rob Herring
- [U-Boot] arch/powerpc/lib/board.c:get_effective_memsize() for 4GB+ systems
Timur Tabi
- [U-Boot] [PATCH 01/11] DM: add block device core
Pavel Herrmann
- [U-Boot] [PATCH 03/11] DM: add block controller core
Pavel Herrmann
- [U-Boot] [PATCH 03/11] DM: add block controller core
Pavel Herrmann
- [U-Boot] Subject: [PATCH] Fix for bug in memory sizing code
Tom Rini
- [U-Boot] [PATCH 01/11] DM: add block device core
Marek Vasut
- [U-Boot] [PATCH 03/11] DM: add block controller core
Marek Vasut
- [U-Boot] [PATCH 03/11] DM: add block controller core
Pavel Herrmann
- [U-Boot] [PATCH 01/11] DM: add block device core
Pavel Herrmann
- [U-Boot] [PATCH v4 10/11] Add u-boot-pad.bin target to the Makefile
Wolfgang Denk
- [U-Boot] [PATCH 01/11] DM: add block device core
Marek Vasut
- [U-Boot] [PATCH] SBx81CFC960: embed Fman microcode in the bootloader
Wolfgang Denk
- [U-Boot] [PATCH 03/11] DM: add block controller core
Marek Vasut
- [U-Boot] [PATCH v4 10/11] Add u-boot-pad.bin target to the Makefile
Marek Vasut
- [U-Boot] [PATCH V3 3/8] disk: introduce get_device()
Stephen Warren
- [U-Boot] [PATCH v4 10/11] Add u-boot-pad.bin target to the Makefile
Tom Rini
- [U-Boot] [PATCH v4 10/11] Add u-boot-pad.bin target to the Makefile
José Miguel Gonçalves
- [U-Boot] [PATCH] SBx81CFC960: embed Fman microcode in the bootloader
Timur Tabi
- [U-Boot] [PATCH v4 10/11] Add u-boot-pad.bin target to the Makefile
Langer Thomas (LQDE RD ST PON SW)
- [U-Boot] [PATCH v4 10/11] Add u-boot-pad.bin target to the Makefile
Tom Rini
- [U-Boot] Disabling video in bootm (cleanup_before_linux)
Eric Nelson
- [U-Boot] [PATCH 01/11] DM: add block device core
Pavel Herrmann
- [U-Boot] Disabling video in bootm (cleanup_before_linux)
Anatolij Gustschin
- [U-Boot] [PATCH 03/11] DM: add block controller core
Pavel Herrmann
- [U-Boot] [PATCH V2] i.MX6: provide functional names for CCM_CCGR0-CCGR6 bit fields
Eric Nelson
- [U-Boot] Disabling video in bootm (cleanup_before_linux)
Eric Nelson
- [U-Boot] [PULL] u-boot-usb/master
Tom Rini
- [U-Boot] [PATCH 01/11] DM: add block device core
Marek Vasut
- [U-Boot] [PATCH 03/11] DM: add block controller core
Marek Vasut
- [U-Boot] [PULL] u-boot-usb/master
Marek Vasut
- [U-Boot] [PULL] u-boot-usb/master
Tom Rini
- [U-Boot] [PATCH v4 10/11] Add u-boot-pad.bin target to the Makefile
Scott Wood
- [U-Boot] [PATCH v4 10/11] Add u-boot-pad.bin target to the Makefile
Marek Vasut
- [U-Boot] [PATCH v5 00/11] S3C24XX: Add support to MINI2416 board
José Miguel Gonçalves
- [U-Boot] [PATCH v5 01/11] Add configuration option to select printf() inclusion on SPL
José Miguel Gonçalves
- [U-Boot] [PATCH v5 02/11] S3C24XX: Add core support for Samsung's S3C24XX SoCs
José Miguel Gonçalves
- [U-Boot] [PATCH v5 03/11] serial: Add support to 4 ports in serial_s3c24x0
José Miguel Gonçalves
- [U-Boot] [PATCH v5 04/11] serial: Use a more precise baud rate generation for serial_s3c24x0
José Miguel Gonçalves
- [U-Boot] [PATCH v5 05/11] serial: Remove unnecessary delay in serial_s3c24x0
José Miguel Gonçalves
- [U-Boot] [PATCH v5 06/11] rtc: Improve rtc_get() on s3c24x0_rtc
José Miguel Gonçalves
- [U-Boot] [PATCH v5 07/11] rtc: Fix rtc_reset() on s3c24x0_rtc
José Miguel Gonçalves
- [U-Boot] [PATCH v5 08/11] rtc: Don't allow setting unsuported years on s3c24x0_rtc
José Miguel Gonçalves
- [U-Boot] [PATCH v5 09/11] S3C24XX: Add NAND Flash driver
José Miguel Gonçalves
- [U-Boot] [PATCH v5 10/11] Add u-boot-with-spl.bin target to the Makefile
José Miguel Gonçalves
- [U-Boot] [PATCH v5 11/11] S3C24XX: Add support to MINI2416 board
José Miguel Gonçalves
- [U-Boot] [PATCH 01/11] DM: add block device core
Pavel Herrmann
- [U-Boot] [PATCH v4 10/11] Add u-boot-pad.bin target to the Makefile
Scott Wood
- [U-Boot] [PATCH] net/phy: support the mv88e6352 switch
Joe Hershberger
- [U-Boot] [PATCH 03/11] DM: add block controller core
Pavel Herrmann
- [U-Boot] [PATCH 01/11] DM: add block device core
Marek Vasut
- [U-Boot] [PATCH 03/11] DM: add block controller core
Marek Vasut
- [U-Boot] [PATCH v4 10/11] Add u-boot-pad.bin target to the Makefile
Marek Vasut
- [U-Boot] [PATCH 01/11] DM: add block device core
Pavel Herrmann
- [U-Boot] [PATCH v2 01/19] Add gpio_request() to asm-generic header
Anatolij Gustschin
- [U-Boot] [PATCH v4 10/11] Add u-boot-pad.bin target to the Makefile
Scott Wood
- [U-Boot] [PATCH v2 02/19] fdt: Add debugging to fdtdec_get_int/addr()
Anatolij Gustschin
- [U-Boot] [PATCH V4 1/6] disk: introduce get_device()
Stephen Warren
- [U-Boot] [PATCH V4 2/6] disk: get_device_and_partition() "auto" partition and cleanup
Stephen Warren
- [U-Boot] [PATCH V4 3/6] disk: part_efi: range-check partition number
Stephen Warren
- [U-Boot] [PATCH V4 4/6] disk: part_efi: parse and store partition UUID
Stephen Warren
- [U-Boot] [PATCH V4 5/6] disk: part_msdos: parse and store partition UUID
Stephen Warren
- [U-Boot] [PATCH V4 6/6] cmd_part: add partition-related command
Stephen Warren
- [U-Boot] [PATCH v2 02/19] fdt: Add debugging to fdtdec_get_int/addr()
Anatolij Gustschin
- [U-Boot] [PATCH] mx28evk: Remove fecmxc_mii_postcall()
Fabio Estevam
- [U-Boot] [PATCH v3 01/18] fdt: Tidy debugging, add to fdtdec_get_int/addr()
Anatolij Gustschin
- [U-Boot] [PATCH v3 02/18] fdt: Add header guard to fdtdec.h
Anatolij Gustschin
- [U-Boot] [PULL] u-boot-usb/master
Albert ARIBAUD
- [U-Boot] [PATCH 0/2] i.MX: ipufb: shut down IPU frame buffer before booting O/S
Eric Nelson
- [U-Boot] [PATCH 1/2] i.MX: mxc_ipuv3_fb: add ipuv3_fb_shutdown() routine to stop IPU before bootm
Eric Nelson
- [U-Boot] [PATCH 2/2] i.MX: shut down video before launch of O/S
Eric Nelson
- [U-Boot] [PATCH 0/2] Move Tegra20 files to common subdirs, prep for T30
Tom Warren
- [U-Boot] [PATCH 1/2] Tegra20: Move some code files to common directories for upcoming Tegra30 patches.
Tom Warren
- [U-Boot] [PATCH 2/2] Tegra20: Move some include files to arch-tegra for sharing with Tegra30
Tom Warren
- [U-Boot] [PATCH] i.MX6: set drive strength for parallel RGB pads
Eric Nelson
- [U-Boot] [PATCH 1/2] i.MX: mxc_ipuv3_fb: add ipuv3_fb_shutdown() routine to stop IPU before bootm
Eric Nelson
- [U-Boot] [PATCH 2/2] i.MX: shut down video before launch of O/S
Eric Nelson
- [U-Boot] [PATCH 1/2] i.MX: mxc_ipuv3_fb: add ipuv3_fb_shutdown() routine to stop IPU before bootm
Eric Nelson
- [U-Boot] [PATCH 2/2] i.MX: shut down video before launch of O/S
Eric Nelson
- [U-Boot] Please pull u-boot-ti/master
Albert ARIBAUD
- [U-Boot] [PATCH 01/11] DM: add block device core
Marek Vasut
- [U-Boot] [PATCH] mx28evk: Remove fecmxc_mii_postcall()
Marek Vasut
- [U-Boot] Please pull u-boot-ti/master
Tom Rini
- [U-Boot] Pull request: u-boot-arm/master
Albert ARIBAUD
- [U-Boot] [PATCH] i.MX6: define IOMUX_GPR3 register bitfields
Eric Nelson
- [U-Boot] Please pull u-boot-ti/master (updated)
Tom Rini
- [U-Boot] [PATCH v4 0/6] tegra: Add NAND flash support
Tom Warren
- [U-Boot] [PATCH V2] common/lcd: add protection from null bmp pointer
Anatolij Gustschin
- [U-Boot] [PATCH] video/powerpc: don't touch DIU registers that we don't need
Anatolij Gustschin
- [U-Boot] [PATCH v4 0/6] tegra: Add NAND flash support
Stephen Warren
- [U-Boot] [RFC PATCH 0/5] Add environment call-back capability
Joe Hershberger
- [U-Boot] [RFC PATCH 1/5] env: Add support for callbacks to environment vars
Joe Hershberger
- [U-Boot] [RFC PATCH 2/5] env: Add a loadaddr env handler
Joe Hershberger
- [U-Boot] [RFC PATCH 3/5] env: Add a bootfile env handler
Joe Hershberger
- [U-Boot] [RFC PATCH 4/5] env: Add a baudrate env handler
Joe Hershberger
- [U-Boot] [RFC PATCH 5/5] env: Add a console env handler
Joe Hershberger
- [U-Boot] [PATCH] disk: make get_partition_info() always available to disk.c
Stephen Warren
- [U-Boot] Pull request: u-boot-video/master
Anatolij Gustschin
- [U-Boot] [PATCH] disk: make get_partition_info() always available to disk.c
Stephen Warren
- [U-Boot] [PATCH] add check infrastructure, default sparse
Kim Phillips
- [U-Boot] [PATCH] pci: fix some warnings related to assumptions about
Anatolij Gustschin
- [U-Boot] [PATCH 2/2] i.MX: shut down video before launch of O/S
Fabio Estevam
- [U-Boot] [PATCH V2] disk: make get_partition_info() always available to disk.c
Stephen Warren
- [U-Boot] [PATCH V2] disk: make get_partition_info() always available to disk.c
Tom Rini
- [U-Boot] [PATCH V2] disk: make get_partition_info() always available to disk.c
Stephen Warren
- [U-Boot] [PATCH V4] i.MX6: mx6qsabrelite: Add splash screen support
Eric Nelson
- [U-Boot] [PATCH 2/2] i.MX: shut down video before launch of O/S
Eric Nelson
- [U-Boot] Pull request: u-boot-staging
Anatolij Gustschin
- [U-Boot] Pull request: u-boot-video/master
Tom Rini
- [U-Boot] [ELCE] Nov. 5.-7. meeting
Marek Vasut
- [U-Boot] [PATCH 01/11] DM: add block device core
Pavel Herrmann
- [U-Boot] [RFC PATCH 00/17] Convert p1_p2_rdb_pc to new spl
Scott Wood
- [U-Boot] [RFC PATCH 01/17] Add u-boot-pad.bin target to the Makefile
Scott Wood
- [U-Boot] [RFC PATCH 02/17] spl: rename u-boot-pad.bin to u-boot-with-spl.bin
Scott Wood
- [U-Boot] [RFC PATCH 03/17] powerpc: remove .fixup test
Scott Wood
- [U-Boot] [RFC PATCH 04/17] powerpc/mpc85xx: fix TLB alignment
Scott Wood
- [U-Boot] [RFC PATCH 05/17] powerpc/mpc8xxx: move LAW code into arch/powerpc/cpu/mpc8xxx
Scott Wood
- [U-Boot] [RFC PATCH 06/17] spl/mpc85xx: move udelay to cpu code
Scott Wood
- [U-Boot] [RFC PATCH 07/17] spl: include resetvec and lib8xxx
Scott Wood
- [U-Boot] [RFC PATCH 08/17] spl/powerpc: introduce CONFIG_SPL_INIT_MINIMAL
Scott Wood
- [U-Boot] [RFC PATCH 09/17] spl/85xx: new SPL support
Scott Wood
- [U-Boot] [RFC PATCH 10/17] powerpc/p1_p2_rdb_pc: new SPL support
Scott Wood
- [U-Boot] [RFC PATCH 11/17] spl/nand: introduce CONFIG_SPL_NAND_MINIMAL
Scott Wood
- [U-Boot] [RFC PATCH 12/17] spl/nand: config symbol documentation
Scott Wood
- [U-Boot] [RFC PATCH 13/17] spl/nand: Add minimal-spl driver for Freescale eLBC NAND
Scott Wood
- [U-Boot] [RFC PATCH 14/17] spl: introduce CONFIG_SPL_TARGET
Scott Wood
- [U-Boot] [RFC PATCH 15/17] p1_p2_rdb_pc: convert from nand_spl to new spl
Scott Wood
- [U-Boot] [RFC PATCH 16/17] powerpc/mpc85xx/p2020rdb-pc: fix SPL DDR config
Scott Wood
- [U-Boot] [RFC PATCH 17/17] ns16550: wait for TENT before initializing
Scott Wood
- [U-Boot] [PATCH 01/11] DM: add block device core
Marek Vasut
- [U-Boot] [RFC PATCH 14/17] spl: introduce CONFIG_SPL_TARGET
Tom Rini
- [U-Boot] [RFC PATCH 00/17] Convert p1_p2_rdb_pc to new spl
Tom Rini
- [U-Boot] [PATCH] i.MX6: define IOMUX_GPR3 register bitfields
Troy Kisky
- [U-Boot] Pull request: u-boot-arm/master
Tom Rini
- [U-Boot] Pull request: u-boot-staging
Tom Rini
- [U-Boot] Pull request: u-boot-staging
Tom Rini
- [U-Boot] [PATCH v5] [RFC] early_malloc for DM added.
Tomas Hlavacek
- [U-Boot] v2012.10-rc1 is now released
Tom Rini
- [U-Boot] Custodians, Maintainers and old platforms
Tom Rini
- [U-Boot] [PATCH v5] [RFC] early_malloc for DM added.
Marek Vasut
- [U-Boot] [PATCHv4] [RFC] DM: early_malloc for DM added.
Tomas Hlavacek
- [U-Boot] [RFC PATCH v2 4/6] musb-new: dsps backend driver
Marek Vasut
- [U-Boot] [RFC PATCH v2 5/6] am33xx: init OTG hardware and new musb gadget driver
Marek Vasut
- [U-Boot] [RFC PATCH v2 0/6] Port of MUSB driver from Linux
Marek Vasut
- [U-Boot] [PATCH] edminiv2: increase malloc len to 256K
Albert ARIBAUD
- [U-Boot] [PATCH] i.MX6: define IOMUX_GPR3 register bitfields
Eric Nelson
- [U-Boot] Custodians, Maintainers and old platforms
Albert ARIBAUD
- [U-Boot] [PULL} please pull u-boot-atmel/master into u-boot-arm/master
Andreas Bießmann
- [U-Boot] [PATCH V2 00/21] Add mx6solo/mx6duallite support
Troy Kisky
- [U-Boot] [PATCH V2 01/21] imximage: make header variable length
Troy Kisky
- [U-Boot] [PATCH V2 02/21] imximage: check dcd_len as entries added
Troy Kisky
- [U-Boot] [PATCH V2 03/21] imximage: enable word writes for version2 header
Troy Kisky
- [U-Boot] [PATCH V2 04/21] imximage: cleanup parsing
Troy Kisky
- [U-Boot] [PATCH V2 05/21] imximage: add expression evaluation
Troy Kisky
- [U-Boot] [PATCH V2 06/21] imximage: add plugin commands
Troy Kisky
- [U-Boot] [PATCH V2 07/21] imximage.cfg: run files through C preprocessor
Troy Kisky
- [U-Boot] [PATCH V2 08/21] mx6: add plugin file for use with imximage.cfg
Troy Kisky
- [U-Boot] [PATCH V2 09/21] mx6q_4x_mt41j128.cfg: use symbols instead of hardcoded constants
Troy Kisky
- [U-Boot] [PATCH V2 10/21] mx6q_4x_mt41j128.cfg: allow plugin to work
Troy Kisky
- [U-Boot] [PATCH V2 11/21] mx6q_4x_mt41j128.cfg: enable plugin mode
Troy Kisky
- [U-Boot] [PATCH V2 12/21] mx6q_4x_mt41j128.cfg: add comments
Troy Kisky
- [U-Boot] [PATCH V2 13/21] mx6q_4x_mt41j128.cfg: use ddr3 mode for reset
Troy Kisky
- [U-Boot] [PATCH V2 14/21] mx6q_4x_mt41j128.cfg: skip initiailizing non-existent memory
Troy Kisky
- [U-Boot] [PATCH V2 15/21] mx6q_4x_mt41j128.cfg: reorder for more efficient storage
Troy Kisky
- [U-Boot] [PATCH V2 16/21] mx6q_4x_mt41j128.cfg: force ZQ calibration
Troy Kisky
- [U-Boot] [PATCH V2 17/21] mx6: soc: add get_cpu_type
Troy Kisky
- [U-Boot] [PATCH V2 18/21] arch-mx6: add mx6dl_pins.h
Troy Kisky
- [U-Boot] [PATCH V2 19/21] mx6qsabrelite: add support for mx6 solo/duallite
Troy Kisky
- [U-Boot] [PATCH V2 20/21] mx6q_4x_mt41j128.cfg: add mx6 solo/duallite support
Troy Kisky
- [U-Boot] [PATCH V2 21/21] mx6qsabrelite: change CONFIG_SYS_PROMPT
Troy Kisky
- [U-Boot] [PATCH V2 17/21] mx6: soc: add get_cpu_type
Fabio Estevam
- [U-Boot] =?true?q?=5BPULL=5D=20please=20pull=20u-boot-atmel/master=20into=20u-boot-arm/master?=
Andreas Bießmann
- [U-Boot] [PULL] please pull u-boot-atmel/master into u-boot-arm/master
Andreas Bießmann
- [U-Boot] [PATCH V2 08/21] mx6: add plugin file for use with imximage.cfg
Vikram Narayanan
- [U-Boot] [PATCH V2 18/21] arch-mx6: add mx6dl_pins.h
Vikram Narayanan
- [U-Boot] [PATCH V2 19/21] mx6qsabrelite: add support for mx6 solo/duallite
Vikram Narayanan
- [U-Boot] [PATCH V2 00/21] Add mx6solo/mx6duallite support
Dirk Behme
- [U-Boot] [PATCH v2 0/5] Marvell SDIO/MMC driver for Sheevaplug
DrEagle
- [U-Boot] [PATCH v2 1/5] Add Marvell SDIO/MMC driver for Kirkwood SoC
DrEagle
- [U-Boot] [PATCH v2 2/5] Add SDIO/MMC support for kirkwood SoC
DrEagle
- [U-Boot] [PATCH v2 3/5] Add SDIO/MMC support for Sheevaplug board
DrEagle
- [U-Boot] [PATCH v2 4/5] Fix env address for Sheevaplug board
DrEagle
- [U-Boot] [PATCH v2 5/5] Fix timeout in Marvell SDIO MMC driver
DrEagle
- [U-Boot] [PATCH v2 0/5] Marvell SDIO/MMC driver for Sheevaplug
DrEagle
- [U-Boot] [PATCH v5] [RFC] early_malloc for DM added.
Tomas Hlavacek
- [U-Boot] [RFC PATCH v2 0/6] Port of MUSB driver from Linux
Ilya Yanok
- [U-Boot] [RFC PATCH v2 5/6] am33xx: init OTG hardware and new musb gadget driver
Ilya Yanok
- [U-Boot] [RFC PATCH v2 4/6] musb-new: dsps backend driver
Ilya Yanok
- [U-Boot] [PATCH] ARM: lacie_kw: add support for WIRELESS_SPACE
Albert ARIBAUD
- [U-Boot] [PATCH 01/11] DM: add block device core
Pavel Herrmann
- [U-Boot] [PATCH] SBx81CFC960: embed Fman microcode in the bootloader
Chris Packham
- [U-Boot] [PATCH v5] [RFC] early_malloc for DM added.
Marek Vasut
- [U-Boot] [PATCH 01/11] DM: add block device core
Marek Vasut
- [U-Boot] [RFC PATCH v2 4/6] musb-new: dsps backend driver
Marek Vasut
- [U-Boot] Disabling video in bootm (cleanup_before_linux)
Otavio Salvador
- [U-Boot] [PATCH 1/2] i.MX: mxc_ipuv3_fb: add ipuv3_fb_shutdown() routine to stop IPU before bootm
Otavio Salvador
- [U-Boot] [ELCE] Nov. 5.-7. meeting
Otavio Salvador
- [U-Boot] [PATCH] pci: fix some warnings related to assumptions about
Kumar Gala
- [U-Boot] [PATCH 01/11] DM: add block device core
Pavel Herrmann
- [U-Boot] Please pull u-boot-mpc85xx (for v2012.10)
Kumar Gala
- [U-Boot] [PATCH 1/2] i.MX: mxc_ipuv3_fb: add ipuv3_fb_shutdown() routine to stop IPU before bootm
Fabio Estevam
- [U-Boot] [PATCH 1/2] i.MX: mxc_ipuv3_fb: add ipuv3_fb_shutdown() routine to stop IPU before bootm
Otavio Salvador
- [U-Boot] RFC - PatchTrack Specification (revised)
Marek Vasut
- [U-Boot] [PATCH V4] i.MX6: mx6qsabrelite: Add splash screen support
Fabio Estevam
- [U-Boot] Disabling video in bootm (cleanup_before_linux)
Eric Nelson
- [U-Boot] Disabling video in bootm (cleanup_before_linux)
Otavio Salvador
- [U-Boot] [PATCH v2] mx6: Remove lowlevel_init.S
Fabio Estevam
- [U-Boot] [PATCH V4] i.MX6: mx6qsabrelite: Add splash screen support
Eric Nelson
- [U-Boot] [PATCH V2 00/21] Add mx6solo/mx6duallite support
Troy Kisky
- [U-Boot] [PATCH] common/lcd: fix build breakage for at91sam9x5ek and trats boards
Anatolij Gustschin
- [U-Boot] [PATCH 1/6] h2200: Add support for iPAQ h2200
Łukasz Dałek
- [U-Boot] [PATCH V4] i.MX6: mx6qsabrelite: Add splash screen support
Fabio Estevam
- [U-Boot] [PATCH 1/6] h2200: Add support for iPAQ h2200
Marek Vasut
- [U-Boot] [PATCH V2 17/21] mx6: soc: add get_cpu_type
Troy Kisky
- [U-Boot] [PATCH 1/6] h2200: Add support for iPAQ h2200
Łukasz Dałek
- [U-Boot] [PATCH V2 18/21] arch-mx6: add mx6dl_pins.h
Troy Kisky
- [U-Boot] [PATCH V4] i.MX6: mx6qsabrelite: Add splash screen support
Eric Nelson
- [U-Boot] [PATCH V2 19/21] mx6qsabrelite: add support for mx6 solo/duallite
Troy Kisky
- [U-Boot] [PATCH V2 15/21] mx6q_4x_mt41j128.cfg: reorder for more efficient storage
Fabio Estevam
- [U-Boot] [PATCH V2 15/21] mx6q_4x_mt41j128.cfg: reorder for more efficient storage
Troy Kisky
- [U-Boot] [PATCH] ARM: lacie_kw: add support for WIRELESS_SPACE
Tom Rini
- [U-Boot] [RFC PATCH v2 0/6] Port of MUSB driver from Linux
Tom Rini
- [U-Boot] [PATCH] pci: fix some warnings related to assumptions about
Tom Rini
- [U-Boot] [PATCH 1/6] h2200: Add support for iPAQ h2200
Marek Vasut
- [U-Boot] [PATCH 1/6] h2200: Add support for iPAQ h2200
Łukasz Dałek
- [U-Boot] [PATCH 1/6] h2200: Add support for iPAQ h2200
Marek Vasut
- [U-Boot] [PATCH 1/6] h2200: Add support for iPAQ h2200
Łukasz Dałek
- [U-Boot] [PATCH 1/6] h2200: Add support for iPAQ h2200
Marek Vasut
- [U-Boot] [PATCH 1/6] h2200: Add support for iPAQ h2200
Łukasz Dałek
- [U-Boot] [PATCH v2 8/8] FAT: Make it possible to read from any file position
Benoît Thébaudeau
- [U-Boot] [PATCH 1/3] mx25: add CPU revision 1.2
Eric Bénard
- [U-Boot] [PATCH 2/3] mx25: fix compilation when CONFIG_FSL_ESDHC is enabled
Eric Bénard
- [U-Boot] [PATCH 3/3] add Eukrea's CPUIMX25
Eric Bénard
- [U-Boot] [PATCH 1/3] mx25: add CPU revision 1.2
Otavio Salvador
- [U-Boot] [PATCH 2/3] mx25: fix compilation when CONFIG_FSL_ESDHC is enabled
Otavio Salvador
- [U-Boot] [PATCH 3/3] add Eukrea's CPUIMX25
Otavio Salvador
- [U-Boot] [PATCH 2/3] mx25: fix compilation when CONFIG_FSL_ESDHC is enabled
Benoît Thébaudeau
- [U-Boot] [PATCH 3/3] add Eukrea's CPUIMX25
Eric Bénard
- [U-Boot] [PATCH 3/3] add Eukrea's CPUIMX25
Eric Bénard
- [U-Boot] [PATCH v6] [RFC] early_malloc for DM added.
Tomas Hlavacek
- [U-Boot] [PATCH] cfb_console: flush FB cache at end of public functions
Eric Nelson
- [U-Boot] [PATCH] edminiv2: increase malloc len to 256K
Prafulla Wadaskar
- [U-Boot] [PATCH V2 08/21] mx6: add plugin file for use with imximage.cfg
Stefano Babic
- [U-Boot] [PATCH V2 01/21] imximage: make header variable length
Stefano Babic
- [U-Boot] [PATCH V2 02/21] imximage: check dcd_len as entries added
Stefano Babic
- [U-Boot] [PATCH V2 04/21] imximage: cleanup parsing
Stefano Babic
- [U-Boot] [PATCH 1/2] mx25: add CPU revision 1.2
Eric Bénard
- [U-Boot] [PATCH v2 1/2] mx25: add CPU revision 1.2
Eric Bénard
- [U-Boot] [PATCH v2 2/2] add Eukrea's CPUIMX25
Eric Bénard
- [U-Boot] [PATCH 1/2] mx25: add CPU revision 1.2
Eric Bénard
- [U-Boot] [PATCH v6] [RFC] early_malloc for DM added.
Graeme Russ
- [U-Boot] [PATCH v2 0/6] Add h2200 support and pxa25x ethernet gadget
Lukasz Dalek
- [U-Boot] [PATCH v2 1/6] h2200: Add support for iPAQ h2200 palmtop
Lukasz Dalek
- [U-Boot] [PATCH v2 2/6] pxa25x: Add support for USB ethernet gadget
Lukasz Dalek
- [U-Boot] [PATCH v2 3/6] pxa: Add some stuff to examine cpu model and rev
Lukasz Dalek
- [U-Boot] [PATCH v2 4/6] usbether: Fixed bug when using with PXA25X chips
Lukasz Dalek
- [U-Boot] [PATCH v2 5/6] usbether: Define CONFIG_USB_ETH_{CDC, SUBSET}
Lukasz Dalek
- [U-Boot] [PATCH v2 6/6] usbether: Removed DEV_CONFIG_{CDC,SUBSET}
Lukasz Dalek
- [U-Boot] [PATCH] env: remove duplicated env_get_char_spec()
Igor Grinberg
- [U-Boot] [PATCH V2 05/21] imximage: add expression evaluation
Stefano Babic
- [U-Boot] [PATCH V2 17/21] mx6: soc: add get_cpu_type
Stefano Babic
- [U-Boot] Please pull u-boot-mpc85xx (for v2012.10)
Andy Fleming
- [U-Boot] [PATCH] env: checkpatch clean env_fat
Igor Grinberg
- [U-Boot] [PATCH] FAT: split block device interactions from filesystem logic
Pavel Herrmann
- [U-Boot] [PATCH v6] [RFC] early_malloc for DM added.
Tomas Hlavacek
- [U-Boot] [PATCH] ZFS: fix some warnings, cleanup
Pavel Herrmann
- [U-Boot] [PATCH V2 06/21] imximage: add plugin commands
Stefano Babic
- [U-Boot] [PATCH v7] [RFC] early_malloc for DM added.
Tomas Hlavacek
- [U-Boot] [PATCH] ZFS: fix some warnings, cleanup
Marek Vasut
- [U-Boot] [PATCH 1/4] COMMON: Add __stringify() function
Marek Vasut
- [U-Boot] [PATCH 2/4] COMMON: Use __stringify() instead of xstr()
Marek Vasut
- [U-Boot] [PATCH 3/4] COMMON: Use __stringify() instead of MK_STR()
Marek Vasut
- [U-Boot] [PATCH 4/4] COMMON: Use __stringify() instead of rest of implementations
Marek Vasut
- [U-Boot] [PATCH v2 1/6] h2200: Add support for iPAQ h2200 palmtop
Marek Vasut
- [U-Boot] [PATCH v2 2/6] pxa25x: Add support for USB ethernet gadget
Marek Vasut
- [U-Boot] [PATCH 1/2] i.MX: mxc_ipuv3_fb: add ipuv3_fb_shutdown() routine to stop IPU before bootm
Stefano Babic
- [U-Boot] [PATCH 1/3] mx25: add CPU revision 1.2
Stefano Babic
- [U-Boot] [PATCH v8] [RFC] early_malloc for DM added.
Tomas Hlavacek
- [U-Boot] [PATCH V2 08/21] mx6: add plugin file for use with imximage.cfg
Eric Nelson
- [U-Boot] [PATCH v4 10/11] Add u-boot-pad.bin target to the Makefile
Wolfgang Denk
- [U-Boot] [PATCH v8] [RFC] early_malloc for DM added.
Wolfgang Denk
- [U-Boot] [PATCH 1/2] i.MX: mxc_ipuv3_fb: add ipuv3_fb_shutdown() routine to stop IPU before bootm
Dirk Behme
- [U-Boot] [PATCH 1/2] i.MX: mxc_ipuv3_fb: add ipuv3_fb_shutdown() routine to stop IPU before bootm
Eric Nelson
- [U-Boot] [PATCH v8] [RFC] early_malloc for DM added.
Tomas Hlavacek
- [U-Boot] [PATCH 1/2] i.MX: mxc_ipuv3_fb: add ipuv3_fb_shutdown() routine to stop IPU before bootm
Fabio Estevam
- [U-Boot] [PATCH 1/4] COMMON: Add __stringify() function
Albert ARIBAUD
- [U-Boot] [PATCH V2 08/21] mx6: add plugin file for use with imximage.cfg
Stefano Babic
- [U-Boot] [PATCH 1/2] i.MX: mxc_ipuv3_fb: add ipuv3_fb_shutdown() routine to stop IPU before bootm
Stefano Babic
- [U-Boot] [PATCH V2 0/2] i.MX: ipufb: shut down IPU frame buffer before booting
Eric Nelson
- [U-Boot] [PATCH V2 1/2] i.MX: mxc_ipuv3_fb: add ipuv3_fb_shutdown() routine to stop IPU frame buffer
Eric Nelson
- [U-Boot] [PATCH V2 2/2] i.MX: shut down video before launch of O/S
Eric Nelson
- [U-Boot] [PATCH v2 2/2] add Eukrea's CPUIMX25
Vikram Narayanan
- [U-Boot] [PATCH] FAT: split block device interactions from filesystem logic
Benoît Thébaudeau
- [U-Boot] [PATCH v2 2/2] add Eukrea's CPUIMX25
Stefano Babic
- [U-Boot] [PATCH] mx6qsabresd: Add Ethernet support
Stefano Babic
- [U-Boot] [PATCH] mx6qsabresd: Add 8-bit USDHC support
Stefano Babic
- [U-Boot] [PATCH v2] mx51evk: Add CONFIG_REVISION_TAG
Stefano Babic
- [U-Boot] [PATCH] KARO TX25: Fix NAND Flash R/W cycle times
Stefano Babic
- [U-Boot] Displays on i.MX (was Re: [PATCH 1/2])
Eric Nelson
- [U-Boot] [PATCH 1/2] i.MX: mxc_ipuv3_fb: add ipuv3_fb_shutdown() routine to stop IPU before bootm
Sascha Hauer
- [U-Boot] [PATCH v2 2/6] pxa25x: Add support for USB ethernet gadget
Łukasz Dałek
- [U-Boot] [PATCH 1/4] COMMON: Add __stringify() function
Marek Vasut
- [U-Boot] [PATCH v2 2/6] pxa25x: Add support for USB ethernet gadget
Marek Vasut
- [U-Boot] [PATCH v2 2/6] pxa25x: Add support for USB ethernet gadget
Łukasz Dałek
- [U-Boot] [PATCH v2 2/2] add Eukrea's CPUIMX25
Eric Bénard
- [U-Boot] [NEXT PATCH v1 2/7] NAND: added NAND type to nand_ids
Eric Bénard
- [U-Boot] [PATCH v2 1/6] h2200: Add support for iPAQ h2200 palmtop
Łukasz Dałek
- [U-Boot] [NEXT PATCH v1 4/7] MX35: Add soc_boot_mode and soc_boot_device to MX35
Eric Bénard
- [U-Boot] [PATCH v2 1/6] h2200: Add support for iPAQ h2200 palmtop
Marek Vasut
- [U-Boot] [PATCH v2 2/6] pxa25x: Add support for USB ethernet gadget
Marek Vasut
- [U-Boot] [PATCH v2 1/6] h2200: Add support for iPAQ h2200 palmtop
Łukasz Dałek
- [U-Boot] [PATCH v2 2/6] pxa25x: Add support for USB ethernet gadget
Łukasz Dałek
- [U-Boot] iMx31 Litekit U-boot not working
Vipin Gahlaut
- [U-Boot] [PATCH v2 1/6] h2200: Add support for iPAQ h2200 palmtop
Marek Vasut
- [U-Boot] [PATCH v2 2/6] pxa25x: Add support for USB ethernet gadget
Marek Vasut
- [U-Boot] Performance of the ARM's PL310 L2 cache.
Marek Vasut
- [U-Boot] [PATCH] i2c_probe: update for use in scripting
Eric Nelson
- [U-Boot] [PATCH v2 1/6] h2200: Add support for iPAQ h2200 palmtop
Łukasz Dałek
- [U-Boot] [PATCH v2 2/2] add Eukrea's CPUIMX25
Eric Bénard
- [U-Boot] [PATCH v2 1/6] h2200: Add support for iPAQ h2200 palmtop
Marek Vasut
- [U-Boot] [PATCH v2 1/6] h2200: Add support for iPAQ h2200 palmtop
Łukasz Dałek
- [U-Boot] [PATCH v2 1/6] h2200: Add support for iPAQ h2200 palmtop
Marek Vasut
- [U-Boot] [PATCH v2 1/6] h2200: Add support for iPAQ h2200 palmtop
Łukasz Dałek
- [U-Boot] [PATCH v2 1/6] h2200: Add support for iPAQ h2200 palmtop
Marek Vasut
- [U-Boot] [PATCH 1/4] COMMON: Add __stringify() function
Albert ARIBAUD
- [U-Boot] [PATCH v2 1/6] h2200: Add support for iPAQ h2200 palmtop
Łukasz Dałek
- [U-Boot] [PATCH 1/4] COMMON: Add __stringify() function
Marek Vasut
- [U-Boot] How to manage RMOBILE patches?
Nobuhiro Iwamatsu
- [U-Boot] [PATCH V4] i.MX6: mx6qsabrelite: Add splash screen support
Eric Nelson
- [U-Boot] [PATCH 0/3] i.MX6: implement hdmidet command
Eric Nelson
- [U-Boot] [PATCH 1/3] i.MX6: add HDMI transmitter register declarations from kernel WIP.
Eric Nelson
- [U-Boot] [PATCH 2/3] i.MX6: Add hdmidet command to detect attached HDMI monitor
Eric Nelson
- [U-Boot] [PATCH 3/3] i.MX6: mx6qsabrelite: Include hdmidet command.
Eric Nelson
- [U-Boot] [PATCH v2 1/6] h2200: Add support for iPAQ h2200 palmtop
Marek Vasut
- [U-Boot] [PATCH 6/6] fdt: Add a Linux tool for reading values from FDT files
Marek Vasut
- [U-Boot] [PATCH v8] [RFC] early_malloc for DM added.
Marek Vasut
- [U-Boot] [PATCH v2 1/6] h2200: Add support for iPAQ h2200 palmtop
Łukasz Dałek
- [U-Boot] [PATCH v2 1/6] h2200: Add support for iPAQ h2200 palmtop
Marek Vasut
- [U-Boot] [PATCH V2 08/21] mx6: add plugin file for use with imximage.cfg
Eric Nelson
- [U-Boot] [PATCH v2 1/6] h2200: Add support for iPAQ h2200 palmtop
Łukasz Dałek
- [U-Boot] [PATCH v8] [RFC] early_malloc for DM added.
Graeme Russ
- [U-Boot] [PATCH v8] [RFC] early_malloc for DM added.
Tomas Hlavacek
- [U-Boot] [PATCH v8] [RFC] early_malloc for DM added.
Graeme Russ
- [U-Boot] [RFC] [PATCH 0/3] Linker-generated arrays
Marek Vasut
- [U-Boot] [PATCH 1/3] common: Add symbol handling for generic lists into Makefile
Marek Vasut
- [U-Boot] [PATCH 2/3] common: Implement support for linker-generated arrays
Marek Vasut
- [U-Boot] [PATCH 3/3] common: Add .u_boot_list into all linker files
Marek Vasut
- [U-Boot] [PATCH v2 1/6] h2200: Add support for iPAQ h2200 palmtop
Marek Vasut
- [U-Boot] [PATCH 1/3] mmc: sdhci: increase the timeout value for data transfer
Jaehoon Chung
- [U-Boot] [PATCH 1/3] mmc: sdhci: increase the timeout value for data transfer
Rommel Custodio
- [U-Boot] [PATCH] Fix ml507 Xilinx uartlite driver hang
Rommel Custodio
- [U-Boot] [PATCH 1/3] mmc: sdhci: increase the timeout value for data transfer
Jaehoon Chung
- [U-Boot] [PATCH 0/5] EXYNOS4: Enable I2C support
Piotr Wilczek
- [U-Boot] [PATCH 1/5] EXYNOS: CLK: Add i2c clock
Piotr Wilczek
- [U-Boot] [PATCH 2/5] EXYNOS: Add Exynos4 I2C spacing
Piotr Wilczek
- [U-Boot] [PATCH 3/5] EXYNOS: PINMUX: Add pinmux support for i2c
Piotr Wilczek
- [U-Boot] [PATCH 4/5] DRIVERS: I2C: Modify I2C driver for EXYNOS4
Piotr Wilczek
- [U-Boot] [PATCH 5/5] DRIVERS: MISC: PMIC: Modify pmic driver to support multibus I2C
Piotr Wilczek
- [U-Boot] [PATCH V2 08/21] mx6: add plugin file for use with imximage.cfg
Stefano Babic
- [U-Boot] [PATCH v2 0/5] Marvell SDIO/MMC driver for Sheevaplug
Prafulla Wadaskar
- [U-Boot] [NEXT PATCH v1 2/7] NAND: added NAND type to nand_ids
Stefano Babic
- [U-Boot] [NEXT PATCH v1 4/7] MX35: Add soc_boot_mode and soc_boot_device to MX35
Stefano Babic
- [U-Boot] [PATCH v2 1/5] Add Marvell SDIO/MMC driver for Kirkwood SoC
Prafulla Wadaskar
- [U-Boot] [PATCH v2 2/5] Add SDIO/MMC support for kirkwood SoC
Prafulla Wadaskar
- [U-Boot] [PATCH v2 5/5] Fix timeout in Marvell SDIO MMC driver
Prafulla Wadaskar
- [U-Boot] [PATCH v2 3/5] Add SDIO/MMC support for Sheevaplug board
Prafulla Wadaskar
- [U-Boot] [PATCH] mx28evk: Remove fecmxc_mii_postcall()
Stefano Babic
- [U-Boot] [PATCH v2 4/5] Fix env address for Sheevaplug board
Prafulla Wadaskar
- [U-Boot] [PATCH v2 0/5] Marvell SDIO/MMC driver for Sheevaplug
Prafulla Wadaskar
- [U-Boot] [PATCH v2 0/5] Marvell SDIO/MMC driver for Sheevaplug
Prafulla Wadaskar
- [U-Boot] [PATCH V2 2/2] i.MX: shut down video before launch of O/S
Stefano Babic
- [U-Boot] [PATCH V2 1/2] i.MX: mxc_ipuv3_fb: add ipuv3_fb_shutdown() routine to stop IPU frame buffer
Stefano Babic
- [U-Boot] [PATCH] mx28evk: Add missing 'setexpr' command
Stefano Babic
- [U-Boot] I2C on iMX25
Matthias Weißer
- [U-Boot] [ELCE] Nov. 5.-7. meeting
Wolfgang Denk
- [U-Boot] I2C on iMX25
Stefano Babic
- [U-Boot] [ELCE] Nov. 5.-7. meeting
Stefan Roese
- [U-Boot] I2C on iMX25
Matthias Weißer
- [U-Boot] I2C on iMX25
Benoît Thébaudeau
- [U-Boot] I2C on iMX25
Matthias Weißer
- [U-Boot] v2012.10-rc1 is now released
Stefan Roese
- [U-Boot] I2C on iMX25
Stefano Babic
- [U-Boot] [PATCH v3 0/2] Exynos4: add software SPI support on Universal C210 board
Piotr Wilczek
- [U-Boot] [PATCH v3 1/2] drivers: spi: modify soft spi driver
Piotr Wilczek
- [U-Boot] [PATCH v3 2/2] exynos4: universal_C210: use software SPI
Piotr Wilczek
- [U-Boot] [PATCH 01/11] DM: add block device core
Pavel Herrmann
- [U-Boot] [ELCE] Nov. 5.-7. meeting
Roberto Nibali
- [U-Boot] I2C on iMX25
Benoît Thébaudeau
- [U-Boot] v2012.10-rc1 is now released
Stefano Babic
- [U-Boot] [PATCH] imx: Use MXC_I2C_CLK in imx i2c driver
Matthias Weisser
- [U-Boot] [PATCH] common/lcd: fix build breakage for at91sam9x5ek and trats boards
Nikita Kiryanov
- [U-Boot] [PATCH] imx: Use MXC_I2C_CLK in imx i2c driver
Stefano Babic
- [U-Boot] [PATCH v3 0/5] Exynos: Support for display drivers
Piotr Wilczek
- [U-Boot] [PATCH v3 1/5] misc: max8998: Add LDO macros
Piotr Wilczek
- [U-Boot] [PATCH v3 2/5] drivers: video: Add ld9040 video driver
Piotr Wilczek
- [U-Boot] [PATCH v3 3/5] arm: exynos4: cpu: Add definition for display
Piotr Wilczek
- [U-Boot] [PATCH v3 4/5] drivers: video: fix image position
Piotr Wilczek
- [U-Boot] [PATCH v3 5/5] arm: exynos4: universal_C210: add display support
Piotr Wilczek
- [U-Boot] [PATCH] imx: Use MXC_I2C_CLK in imx i2c driver
Benoît Thébaudeau
- [U-Boot] [ELCE] Nov. 5.-7. meeting
Marek Vasut
- [U-Boot] [ELCE] Nov. 5.-7. meeting
Wolfgang Denk
- [U-Boot] [ELCE] Nov. 5.-7. meeting
Stefan Roese
- [U-Boot] [PATCH V2 08/21] mx6: add plugin file for use with imximage.cfg
Eric Nelson
- [U-Boot] [PATCH v8] [RFC] early_malloc for DM added.
Tomas Hlavacek
- [U-Boot] [PATCH v8] [RFC] early_malloc for DM added.
Marek Vasut
- [U-Boot] [PATCH] SBx81CFC960: embed Fman microcode in the bootloader
Timur Tabi
- [U-Boot] [PATCH V4] i.MX6: mx6qsabrelite: Add splash screen support
Stefano Babic
- [U-Boot] [ELCE] Nov. 5.-7. meeting
Marek Vasut
- [U-Boot] [PATCH] mx6q: Add basic support for mx6qsabreauto
Stefano Babic
- [U-Boot] [PATCH V4] i.MX6: mx6qsabrelite: Add splash screen support
Eric Nelson
- [U-Boot] [PATCH V2 08/21] mx6: add plugin file for use with imximage.cfg
Stefano Babic
- [U-Boot] [PATCH V4] i.MX6: mx6qsabrelite: Add splash screen support
Stefano Babic
- [U-Boot] [RFC PATCH 03/17] powerpc: remove .fixup test
Peter Tyser
- [U-Boot] [PATCH 1/3] common: Add symbol handling for generic lists into Makefile
Joe Hershberger
- [U-Boot] v2012.10-rc1 is now released
Tom Rini
- [U-Boot] v2012.10-rc1 is now released
Tom Rini
- [U-Boot] [PATCH V4] i.MX6: mx6qsabrelite: Add splash screen support
Stefano Babic
- [U-Boot] v2012.10-rc1 is now released
Stefan Roese
- [U-Boot] [PATCH 1/3] common: Add symbol handling for generic lists into Makefile
Marek Vasut
- [U-Boot] [ELCE] Nov. 5.-7. meeting
Tom Rini
- [U-Boot] [PATCH 2/3] common: Implement support for linker-generated arrays
Joe Hershberger
- [U-Boot] [PATCH 3/3] common: Add .u_boot_list into all linker files
Joe Hershberger
- [U-Boot] [PATCH 2/3] common: Implement support for linker-generated arrays
Marek Vasut
- [U-Boot] [PATCH 3/3] common: Add .u_boot_list into all linker files
Marek Vasut
- [U-Boot] [PATCH 1/3] common: Add symbol handling for generic lists into Makefile
Joe Hershberger
- [U-Boot] [PATCH 3/3] common: Add .u_boot_list into all linker files
Tom Rini
- [U-Boot] [PATCH 1/3] common: Add symbol handling for generic lists into Makefile
Marek Vasut
- [U-Boot] [PATCH 3/3] common: Add .u_boot_list into all linker files
Marek Vasut
- [U-Boot] [PATCH 3/3] common: Add .u_boot_list into all linker files
Tom Rini
- [U-Boot] [PATCH 3/3] common: Add .u_boot_list into all linker files
Joe Hershberger
- [U-Boot] [PATCH 3/3] common: Add .u_boot_list into all linker files
Marek Vasut
- [U-Boot] [RFC] [PATCH 0/3] Linker-generated arrays
Tom Rini
- [U-Boot] [RFC] [PATCH 0/3] Linker-generated arrays
Marek Vasut
- [U-Boot] [PATCH 1/3] common: Add symbol handling for generic lists into Makefile
Joe Hershberger
- [U-Boot] [PATCH 1/2] Tegra20: Move some code files to common directories for upcoming Tegra30 patches.
Stephen Warren
- [U-Boot] [PATCH 2/2] Tegra20: Move some include files to arch-tegra for sharing with Tegra30
Stephen Warren
- [U-Boot] [PATCH 3/3] common: Add .u_boot_list into all linker files
Tom Rini
- [U-Boot] [PATCH v2 1/2] configs: mx6: Add a common config file
Fabio Estevam
- [U-Boot] [PATCH v2 2/2] mx6q: Add basic support for mx6qsabreauto
Fabio Estevam
- [U-Boot] [RFC PATCH 03/17] powerpc: remove .fixup test
Scott Wood
- [U-Boot] [RFC PATCH 00/17] Convert p1_p2_rdb_pc to new spl
Scott Wood
- [U-Boot] [RFC PATCH 14/17] spl: introduce CONFIG_SPL_TARGET
Scott Wood
- [U-Boot] [RFC PATCH 14/17] spl: introduce CONFIG_SPL_TARGET
Tom Rini
- [U-Boot] [RFC PATCH 00/17] Convert p1_p2_rdb_pc to new spl
Tom Rini
- [U-Boot] [RFC PATCH 00/17] Convert p1_p2_rdb_pc to new spl
Scott Wood
- [U-Boot] [PATCH 1/2] Tegra20: Move some code files to common directories for upcoming Tegra30 patches.
Tom Warren
- [U-Boot] [PATCH 2/2] Tegra20: Move some include files to arch-tegra for sharing with Tegra30
Tom Warren
- [U-Boot] [PATCH 1/3] mmc: sdhci: increase the timeout value for data transfer
Mela Custodio
- [U-Boot] [PATCH 1/2] Tegra20: Move some code files to common directories for upcoming Tegra30 patches.
Stephen Warren
- [U-Boot] [PATCH] Fix ml507 Xilinx uartlite driver hang
Mela Custodio
- [U-Boot] [RFC PATCH 14/17] spl: introduce CONFIG_SPL_TARGET
Scott Wood
- [U-Boot] [PATCH V2 01/21] imximage: make header variable length
Troy Kisky
- [U-Boot] [PATCH V2 08/21] mx6: add plugin file for use with imximage.cfg
Troy Kisky
- [U-Boot] [PATCH V2 02/21] imximage: check dcd_len as entries added
Troy Kisky
- [U-Boot] [PATCH V2 04/21] imximage: cleanup parsing
Troy Kisky
- [U-Boot] [PATCH v4 0/4] USB multi controller
Lucas Stach
- [U-Boot] [PATCH v4 1/4] usb: lowlevel interface change to support multiple controllers
Lucas Stach
- [U-Boot] [PATCH v4 2/4] usb: ehci: rework to take advantage of new lowlevel interface
Lucas Stach
- [U-Boot] [PATCH v4 3/4] usb: add support for multiple usb controllers
Lucas Stach
- [U-Boot] [PATCH v4 4/4] tegra20: port to new ehci interface
Lucas Stach
- [U-Boot] [PATCH V2 05/21] imximage: add expression evaluation
Troy Kisky
- [U-Boot] [PATCH V2 06/21] imximage: add plugin commands
Troy Kisky
- [U-Boot] [PATCH v8] [RFC] early_malloc for DM added.
Tom Rini
- [U-Boot] [PATCH] common/lcd: fix build breakage for at91sam9x5ek and trats boards
Anatolij Gustschin
- [U-Boot] [PATCH V2 08/21] mx6: add plugin file for use with imximage.cfg
Troy Kisky
- [U-Boot] [PATCH v2] ml507: Fix Xilinx uartlite driver hang
Rommel Custodio
- [U-Boot] [RFC PATCH 03/17] powerpc: remove .fixup test
Tom Rini
- [U-Boot] [RFC PATCH 08/17] spl/powerpc: introduce CONFIG_SPL_INIT_MINIMAL
Tom Rini
- [U-Boot] [RFC PATCH 09/17] spl/85xx: new SPL support
Tom Rini
- [U-Boot] [RFC PATCH 08/17] spl/powerpc: introduce CONFIG_SPL_INIT_MINIMAL
Scott Wood
- [U-Boot] [RFC PATCH 09/17] spl/85xx: new SPL support
Scott Wood
- [U-Boot] [RFC PATCH 11/17] spl/nand: introduce CONFIG_SPL_NAND_MINIMAL
Tom Rini
- [U-Boot] [RFC PATCH 11/17] spl/nand: introduce CONFIG_SPL_NAND_MINIMAL
Scott Wood
- [U-Boot] Resets on mx6qsabrelite
Fabio Estevam
- [U-Boot] [RFC PATCH 08/17] spl/powerpc: introduce CONFIG_SPL_INIT_MINIMAL
Tom Rini
- [U-Boot] [RFC PATCH 09/17] spl/85xx: new SPL support
Tom Rini
- [U-Boot] [RFC PATCH 09/17] spl/85xx: new SPL support
Scott Wood
- [U-Boot] [RFC PATCH 11/17] spl/nand: introduce CONFIG_SPL_NAND_MINIMAL
Tom Rini
- [U-Boot] [RFC PATCH 09/17] spl/85xx: new SPL support
Tom Rini
- [U-Boot] [RFC PATCH 08/17] spl/powerpc: introduce CONFIG_SPL_INIT_MINIMAL
Scott Wood
- [U-Boot] Resets on mx6qsabrelite
Eric Nelson
- [U-Boot] Resets on mx6qsabrelite
Tom Rini
- [U-Boot] [PATCH v7 0/29] ARM: SPL: Make more generic, merge DaVinci and OMAP
Tom Rini
- [U-Boot] [PATCH v7 01/29] Makefile: Move SPL files to clobber, remove from clean
Tom Rini
- [U-Boot] [PATCH v7 02/29] spl_mmc: Make FAT checks / calls guarded with CONFIG_SPL_FAT_SUPPORT
Tom Rini
- [U-Boot] [PATCH v7 03/29] omap-common: SPL: Add CONFIG_SPL_DISPLAY_PRINT / spl_display_print()
Tom Rini
- [U-Boot] [PATCH v7 04/29] omap-common: Fix typo in save_boot_params() in lowlevel_init.S
Tom Rini
- [U-Boot] [PATCH v7 05/29] omap-common: SPL: Fix whitespace in omap-common/u-boot-spl.lds.
Tom Rini
- [U-Boot] [PATCH v7 06/29] ARM: SPL: Rename omap_boot_device to spl_boot_device
Tom Rini
- [U-Boot] [PATCH v7 07/29] ARM: SPL: Rename omap_boot_mode to spl_boot_mode()
Tom Rini
- [U-Boot] [PATCH v7 08/29] ARM: SPL: Remove NAND_MODE_HW_ECC from spl_nand.c
Tom Rini
- [U-Boot] [PATCH v7 09/29] ARM: SPL: Only call mem_malloc_init if configured
Tom Rini
- [U-Boot] [PATCH v7 10/29] ARM: SPL: Add <asm/spl.h> and <asm/arch/spl.h>
Tom Rini
- [U-Boot] [PATCH v7 11/29] ARM: SPL: Make spl_mmc.c more generic
Tom Rini
- [U-Boot] [PATCH v7 12/29] ARM: SPL: Clean up spl.c / spl_nand.c slightly
Tom Rini
- [U-Boot] [PATCH v7 13/29] ARM: SPL: Start hooking in the current SPI SPL support
Tom Rini
- [U-Boot] [PATCH v7 14/29] ARM: SPL: Move gpmc_init() to spl_board_init()
Tom Rini
- [U-Boot] [PATCH v7 15/29] SPL: Move the omap SPL framework to common/spl
Tom Rini
- [U-Boot] [PATCH v7 16/29] SPL: Create arch/arm/lib/spl.c for board_init_f and jump_to_image_linux
Tom Rini
- [U-Boot] [PATCH v7 17/29] SPL: do not use fix value for u-boot size
Tom Rini
- [U-Boot] [PATCH v7 18/29] SPL: Use image_get_xxx() functions to access header values
Tom Rini
- [U-Boot] [PATCH v7 19/29] SPL: NAND: Move arch/arm/cpu/armv7/omap-common/spl_nand.c to common/spl
Tom Rini
- [U-Boot] [PATCH v7 20/29] ARM: SPL: Convert davinci to CONFIG_SPL_FRAMEWORK
Tom Rini
- [U-Boot] [PATCH v7 21/29] hawkboard: Update config file to work with common spl framework
Tom Rini
- [U-Boot] [PATCH v7 22/29] da850: Add README.da850
Tom Rini
- [U-Boot] [PATCH v7 23/29] SPL: Add NOR flash booting support
Tom Rini
- [U-Boot] [PATCH v7 24/29] SPL: Add option to skip copying of the mkimage header
Tom Rini
- [U-Boot] [PATCH v7 25/29] SPL: SPI: Enhance spi_spl_load to match the other load functions
Tom Rini
- [U-Boot] [PATCH v7 26/29] SPL: Enable use of custom defined U-Boot entry point
Tom Rini
- [U-Boot] [PATCH v7 27/29] SPL: Make un-supported boot device puts a debug instead
Tom Rini
- [U-Boot] [PATCH v7 28/29] SPL: Rework how we inform about un-headered images
Tom Rini
- [U-Boot] [PATCH v7 29/29] SPL: Add support for loading image from ram in SPL.
Tom Rini
- [U-Boot] [PATCH v8] [RFC] early_malloc for DM added.
Graeme Russ
- [U-Boot] Resets on mx6qsabrelite
Eric Nelson
- [U-Boot] Resets on mx6qsabrelite
Marek Vasut
- [U-Boot] Resets on mx6qsabrelite
Marek Vasut
- [U-Boot] Resets on mx6qsabrelite
Marek Vasut
- [U-Boot] Resets on mx6qsabrelite
Fabio Estevam
- [U-Boot] [PATCH 1/3] mmc: sdhci: increase the timeout value for data transfer
Jaehoon Chung
- [U-Boot] Resets on mx6qsabrelite
Sinan Akman
- [U-Boot] Resets on mx6qsabrelite
Marek Vasut
- [U-Boot] Resets on mx6qsabrelite
Sinan Akman
- [U-Boot] Resets on mx6qsabrelite
Marek Vasut
- [U-Boot] [PATCH v4] PXE: FDT: Add support for fdt in PXE
Chander Kashyap
- [U-Boot] Configure a Numonyx Axcell M29EW on a MPC8323 board
SETTE AGOSTINO - technolabs
- [U-Boot] SPI for MPC8323
SETTE AGOSTINO - technolabs
- [U-Boot] [PULL] please pull u-boot-atmel/master into u-boot-arm/master
Andreas Bießmann
- [U-Boot] [PATCH v8] [RFC] early_malloc for DM added.
Tomas Hlavacek
- [U-Boot] [PATCH v8] [RFC] early_malloc for DM added.
Graeme Russ
- [U-Boot] [PATCH V2 01/21] imximage: make header variable length
Stefano Babic
- [U-Boot] [PATCH V2 02/21] imximage: check dcd_len as entries added
Stefano Babic
- [U-Boot] [PATCH V2 08/21] mx6: add plugin file for use with imximage.cfg
Stefano Babic
- [U-Boot] [PATCH V2 08/21] mx6: add plugin file for use with imximage.cfg
Stefano Babic
- [U-Boot] v2012.10-rc1 is now released
Pavel Machek
- [U-Boot] [PATCHv2] ARM: Add Altera SOCFPGA Cyclone5
Pavel Machek
- [U-Boot] [PATCH v4 2/2] ARM: kirkwood/orion5x: Use reset_cpu definition in include/common.h
Pavel Machek
- [U-Boot] [PATCH] i.MX6: get rid of redundant struct src_regs (dupe of struct src)
Stefano Babic
- [U-Boot] [PATCH v2 2/2] mx6q: Add basic support for mx6qsabreauto
Stefano Babic
- [U-Boot] [PATCH v2 1/2] configs: mx6: Add a common config file
Stefano Babic
- [U-Boot] [PATCH v2 1/2] mx25: add CPU revision 1.2
Stefano Babic
- [U-Boot] [PATCH] imx: Use MXC_I2C_CLK in imx i2c driver
Stefano Babic
- [U-Boot] [PATCH v2] mx6: Remove lowlevel_init.S
Stefano Babic
- [U-Boot] [PATCHv2] ARM: Add Altera SOCFPGA Cyclone5
Marek Vasut
- [U-Boot] Custodians, Maintainers and old platforms
Tom Rini
- [U-Boot] [RFC] [PATCH 0/3 v2] Linker-generated arrays
Marek Vasut
- [U-Boot] [PATCH 1/3 V2] common: Add symbol handling for generic lists into Makefile
Marek Vasut
- [U-Boot] [PATCH 2/3 V2] common: Implement support for linker-generated arrays
Marek Vasut
- [U-Boot] [PATCH 3/3 V2] common: Add .u_boot_list into all linker files
Marek Vasut
- [U-Boot] Resets on mx6qsabrelite
Tom Rini
- [U-Boot] Resets on mx6qsabrelite
Marek Vasut
- [U-Boot] [PATCH 3/3 V2] common: Add .u_boot_list into all linker files
Otavio Salvador
- [U-Boot] [PATCH] am33xx: Enable DDR3 for DDR3 version of beaglebone
Joel A Fernandes
- [U-Boot] [PATCH 3/3 V2] common: Add .u_boot_list into all linker files
Marek Vasut
- [U-Boot] Please pull u-boot-ti/master (updated)
Tom Rini
- [U-Boot] [PATCH] mx6qsabreauto: Add Ethernet support
Fabio Estevam
- [U-Boot] ARMv7 and unaligned access issues
Tom Rini
- [U-Boot] [PATCH resend 0/3] Pending Tegra2 patches
Lucas Stach
- [U-Boot] [PATCH resend 1/3] tegra20: complete periph_id enum
Lucas Stach
- [U-Boot] [PATCH resend 2/3] tegra20: add clock_set_pllout function
Lucas Stach
- [U-Boot] [PATCH resend 3/3] tegra20: rework UART GPIO handling
Lucas Stach
- [U-Boot] [PATCH] common/i2c: Add i2c write command
York Sun
- [U-Boot] [PATCH] ARM: arm1176: Define arch_cpu_init() at the SoC level
Anatolij Gustschin
- [U-Boot] [PATCH 1/3 V2] common: Add symbol handling for generic lists into Makefile
Wolfgang Denk
- [U-Boot] Pull request: u-boot-video/master
Anatolij Gustschin
- [U-Boot] [PATCH 2/3 V2] common: Implement support for linker-generated arrays
Wolfgang Denk
- [U-Boot] [PATCH 3/3 V2] common: Add .u_boot_list into all linker files
Wolfgang Denk
- [U-Boot] [PATCH] common/i2c: Add i2c write command
Tom Rini
- [U-Boot] [PATCH 1/3 V2] common: Add symbol handling for generic lists into Makefile
Marek Vasut
- [U-Boot] [PATCH 2/3 V2] common: Implement support for linker-generated arrays
Marek Vasut
- [U-Boot] [PATCH 3/3 V2] common: Add .u_boot_list into all linker files
Marek Vasut
- [U-Boot] [PATCH v2] MAKEALL: fix per arch board lists
Tom Rini
- [U-Boot] [PATCH] ARM: arm1176: Define arch_cpu_init() at the SoC level
Tom Rini
- [U-Boot] KernelDoc
Marek Vasut
- [U-Boot] [PATCH v4 0/4] USB multi controller
Marek Vasut
- [U-Boot] Please pull u-boot-mpc85xx (for v2012.10)
Tom Rini
- [U-Boot] [PATCH 0/4] USB multi controller
Lucas Stach
- [U-Boot] [PATCH 1/4] usb: lowlevel interface change to support multiple controllers
Lucas Stach
- [U-Boot] [PATCH 2/4] usb: ehci: rework to take advantage of new lowlevel interface
Lucas Stach
- [U-Boot] [PATCH 3/4] usb: add support for multiple usb controllers
Lucas Stach
- [U-Boot] [PATCH 4/4] tegra20: port to new ehci interface
Lucas Stach
- [U-Boot] Pull request: u-boot-video/master
Anatolij Gustschin
- [U-Boot] [PATCH v3 0/2] Tegra 2 USB ULPI series
Lucas Stach
- [U-Boot] [PATCH v3 1/2] usb: ulpi: add indicator configuration function
Lucas Stach
- [U-Boot] [PATCH v3 2/2] tegra20: add USB ULPI init code
Lucas Stach
- [U-Boot] [PATCH v8] [RFC] early_malloc for DM added.
Graeme Russ
- [U-Boot] [U-Boot, V2] disk: make get_partition_info() always available to disk.c
Tom Rini
- [U-Boot] [U-Boot,V4,1/6] disk: introduce get_device()
Tom Rini
- [U-Boot] [PATCH v2 1/9] combine block device load commands into common function
Tom Rini
- [U-Boot] [PATCH] tegra: enable CONFIG_CMD_PART
Stephen Warren
- [U-Boot] v2012.10-rc1 is now released
Tom Rini
- [U-Boot] Pull request: u-boot-video/master
Tom Rini
- [U-Boot] [PATCH v2 4/5] Fix env address for Sheevaplug board
DrEagle
- [U-Boot] [PATCH resend 1/3] tegra20: complete periph_id enum
Lucas Stach
- [U-Boot] [PATCH v3 2/3] tegra20: add clock_set_pllout function
Lucas Stach
- [U-Boot] [PATCH v2 3/3] tegra20: rework UART GPIO handling
Lucas Stach
- [U-Boot] [PATCH 0/6] add zip command support for uboot
Lei Wen
- [U-Boot] KernelDoc
Prabhakar Lad
- [U-Boot] [PATCH 2/3 V2] common: Implement support for linker-generated arrays
Wolfgang Denk
- [U-Boot] KernelDoc
Wolfgang Denk
- [U-Boot] KernelDoc
Wolfgang Denk
- [U-Boot] KernelDoc
Prabhakar Lad
- [U-Boot] [PATCH v2 4/5] Fix env address for Sheevaplug board
Prafulla Wadaskar
- [U-Boot] [PATCH v4 2/2] ARM: kirkwood/orion5x: Use reset_cpu definition in include/common.h
Prafulla Wadaskar
- [U-Boot] [PATCH v1 0/4] introducing vect1: mpc8309 keymile board
Gerlando Falauto
- [U-Boot] [PATCH v1 1/4] cosmetic: suvd3: align #defines
Gerlando Falauto
- [U-Boot] [PATCH v1 2/4] mpc83xx: add support for mpc8309
Gerlando Falauto
- [U-Boot] [PATCH v1 3/4] km83xx: add common support for km8309 boards
Gerlando Falauto
- [U-Boot] [PATCH v1 4/4] km83xx: add kmvect1 board
Gerlando Falauto
- [U-Boot] [PATCH v3 0/8] SPL: Port SPL framework to powerpc
Stefan Roese
- [U-Boot] [PATCH v3 1/8] powerpc: Extract EPAPR_MAGIC constants into processor.h
Stefan Roese
- [U-Boot] [PATCH v3 2/8] SPL: Port SPL framework to powerpc
Stefan Roese
- [U-Boot] [PATCH v3 3/8] env: Extract getenv_f() into separate source file
Stefan Roese
- [U-Boot] [PATCH v3 4/8] mpc5200: Add SPL support
Stefan Roese
- [U-Boot] [PATCH v3 5/8] mpc5200: Add a3m071 board support
Stefan Roese
- [U-Boot] [PATCH v3 6/8] fdt: cmd_fdt: Call fdt_chosen() from "fdt boardsetup"
Stefan Roese
- [U-Boot] [PATCH v3 7/8] Makefile: Add possibility to set entry-point for u-boot.img
Stefan Roese
- [U-Boot] [PATCH v3 8/8] Makefile: Add target for combined spl/u-boot.bin & u-boot.img
Stefan Roese
- [U-Boot] KernelDoc
Wolfgang Denk
- [U-Boot] [PATCH v8] [RFC] early_malloc for DM added.
Tomas Hlavacek
- [U-Boot] problem
林子丁
- [U-Boot] bootm command in U-boot
Manukumar
- [U-Boot] [PATCH v3 3/8] env: Extract getenv_f() into separate source file
Stefan Roese
- [U-Boot] [PATCH v4 3/8] env: Enable getenv_f() for SPL_BUILD
Stefan Roese
- [U-Boot] Problems with a P2020 board
Joakim Tjernlund
- [U-Boot] [PATCH v3 6/8] fdt: cmd_fdt: Call fdt_chosen() from "fdt boardsetup"
Kumar Gala
- [U-Boot] Problems with a P2020 board
Kumar Gala
- [U-Boot] Problems with a P2020 board
Kumar Gala
- [U-Boot] [PATCH v3] h2200: Add support for iPAQ h2200 palmtop
Lukasz Dalek
- [U-Boot] [PATCH] usb.h: Add udc_disconnect prototype to usb.h
Lukasz Dalek
- [U-Boot] bootm command in U-boot
Wolfgang Denk
- [U-Boot] [PATCH v3 6/8] fdt: cmd_fdt: Call fdt_chosen() from "fdt boardsetup"
Stefan Roese
- [U-Boot] Problems with a P2020 board
Joakim Tjernlund
- [U-Boot] Configure a Numonyx Axcell M29EW on a MPC8323 board
Stefano Babic
- [U-Boot] R: Configure a Numonyx Axcell M29EW on a MPC8323 board
SETTE AGOSTINO - technolabs
- [U-Boot] KernelDoc
Marek Vasut
- [U-Boot] [PATCH v3] h2200: Add support for iPAQ h2200 palmtop
Marek Vasut
- [U-Boot] [PATCH] usb.h: Add udc_disconnect prototype to usb.h
Marek Vasut
- [U-Boot] [PATCH 0/6] add zip command support for uboot
Marek Vasut
- [U-Boot] [PATCH v3] h2200: Add support for iPAQ h2200 palmtop
Łukasz Dałek
- [U-Boot] [PATCH v3] h2200: Add support for iPAQ h2200 palmtop
Marek Vasut
- [U-Boot] [PATCH 0/6] add zip command support for uboot
Tom Rini
- [U-Boot] [PATCH 2/3 V2] common: Implement support for linker-generated arrays
Marek Vasut
- [U-Boot] [PATCH] am335x-evm config: decrease bootdelay to 1s and mount rootfs RO
Koen Kooi
- [U-Boot] [PATCH V1 1/3] phy: add phy_connect_by_mask
Joe Hershberger
- [U-Boot] [PATCH] am33xx: Enable DDR3 for DDR3 version of beaglebone
Jason Kridner
- [U-Boot] [PATCH V1 1/3] phy: add phy_connect_by_mask
Troy Kisky
- [PATCH] ARM: arm1176: Define arch_cpu_init() for s3c64xx
Ashok Kumar Reddy
- [U-Boot] [PATCH] ARM: arm1176: Define arch_cpu_init() for s3c64xx
Ashok Kumar Reddy
- [U-Boot] KernelDoc
Joe Hershberger
- [U-Boot] KernelDoc
Marek Vasut
- [U-Boot] KernelDoc
Tom Rini
- [U-Boot] KernelDoc
Marek Vasut
- [U-Boot] [RFC PATCH 1/5] env: Add support for callbacks to environment vars
Wolfgang Denk
- [U-Boot] KernelDoc
Wolfgang Denk
- [U-Boot] KernelDoc
Wolfgang Denk
- [U-Boot] KernelDoc
Marek Vasut
- [U-Boot] KernelDoc
Tom Rini
- [U-Boot] KernelDoc
Marek Vasut
- [U-Boot] KernelDoc
Tom Rini
- [U-Boot] [PATCH 0/6] am335x_evm: Enable UART{1,2,4,5}
Andrew Bradford
- [U-Boot] [PATCH 1/6] am33xx: Enable UART{1,2,4,5} clocks
Andrew Bradford
- [U-Boot] [PATCH 2/6] am33xx: Enable UART{1,2,4,5} pin-mux
Andrew Bradford
- [U-Boot] [PATCH 3/6] serial: Enable up to 6 eserial devices
Andrew Bradford
- [U-Boot] [PATCH 4/6] console & omap-common/spl: Enable use of eserial
Andrew Bradford
- [U-Boot] [PATCH 5/6] am33xx: Enable eserial device usage for ns16550
Andrew Bradford
- [U-Boot] [PATCH 6/6] am335x_evm: Enable use of UART{1,2,4,5}
Andrew Bradford
- [U-Boot] KernelDoc
Wolfgang Denk
- [U-Boot] KernelDoc
Wolfgang Denk
- [U-Boot] [PATCH v3] h2200: Add support for iPAQ h2200 palmtop
Łukasz Dałek
- [U-Boot] [PATCH] FSL SPI read fix.
Dale Smith
- [U-Boot] KernelDoc
Tom Rini
- [U-Boot] [PATCH] mx6qsabreauto: Use ttymxc3 as console
Otavio Salvador
- [U-Boot] [PATCH 0/1] Delete sbc8650 / sbc8540 support.
Paul Gortmaker
- [U-Boot] [PATCH] powerpc: delete Wind River SBC8560/8540 support
Paul Gortmaker
- [U-Boot] [PATCH] fsl espi: Fix reading from device
Dale P. Smith
- [U-Boot] [PATCH v8] [RFC] early_malloc for DM added.
Graeme Russ
- [U-Boot] [PATCH v3] h2200: Add support for iPAQ h2200 palmtop
Marek Vasut
- [U-Boot] KernelDoc
Marek Vasut
- [U-Boot] KernelDoc
Marek Vasut
- [U-Boot] KernelDoc
Marek Vasut
- [U-Boot] [PATCH v3] h2200: Add support for iPAQ h2200 palmtop
Łukasz Dałek
- [U-Boot] [PATCH] usb.h: Add udc_disconnect prototype to usb.h
Łukasz Dałek
- [U-Boot] [PATCH] usb.h: Add udc_disconnect prototype to usb.h
Marek Vasut
- [U-Boot] [PATCH v3] h2200: Add support for iPAQ h2200 palmtop
Marek Vasut
- [U-Boot] [PATCH] usb.h: Add udc_disconnect prototype to usb.h
Łukasz Dałek
- [U-Boot] [PATCH v3] h2200: Add support for iPAQ h2200 palmtop
Łukasz Dałek
- [U-Boot] [PATCH] usb.h: Add udc_disconnect prototype to usb.h
Marek Vasut
- [U-Boot] [PATCH v3] h2200: Add support for iPAQ h2200 palmtop
Marek Vasut
- [U-Boot] [PATCH v3] h2200: Add support for iPAQ h2200 palmtop
Łukasz Dałek
- [U-Boot] [PATCH v3 3/5] arm: exynos4: cpu: Add definition for display
Minkyu Kang
- [U-Boot] [PATCH] usb.h: Add udc_disconnect prototype to usb.h
Łukasz Dałek
- [U-Boot] [PATCH] usb.h: Add udc_disconnect prototype to usb.h
Marek Vasut
- [U-Boot] [PATCH v3] h2200: Add support for iPAQ h2200 palmtop
Marek Vasut
- [U-Boot] [PATCH] usb.h: Add udc_disconnect prototype to usb.h
Łukasz Dałek
- [U-Boot] [PATCH v3] h2200: Add support for iPAQ h2200 palmtop
Łukasz Dałek
- [U-Boot] [PATCH v3] h2200: Add support for iPAQ h2200 palmtop
Marek Vasut
- [U-Boot] [PATCH v1 2/4] mpc83xx: add support for mpc8309
Kim Phillips
- [U-Boot] [PATCH 0/6] add zip command support for uboot
Lei Wen
- [U-Boot] [PATCH 0/6] add zip command support for uboot
Lei Wen
- [U-Boot] [PATCH] common/i2c: Add i2c write command
Heiko Schocher
- [U-Boot] [PATCH v3 3/5] arm: exynos4: cpu: Add definition for display
Piotr Wilczek
- [U-Boot] KernelDoc
Stefan Roese
- [U-Boot] [PATCH v3 2/5] drivers: video: Add ld9040 video driver
Minkyu Kang
- [U-Boot] [PATCH] snowball: Clear UART RX FIFO
Ramesh CHANDRASEKARAN
- [U-Boot] [PATCH v1 2/4] mpc83xx: add support for mpc8309
Gerlando Falauto
- [U-Boot] [PATCH v3 2/5] drivers: video: Add ld9040 video driver
Piotr Wilczek
- [U-Boot] [PATCH] mx6qsabreauto: Use ttymxc3 as console
Stefano Babic
- [U-Boot] [PATCH] TQM8xx: adjust linker script to grown code size
Wolfgang Denk
- [U-Boot] [PATCH 1/6] am33xx: Enable UART{1,2,4,5} clocks
Matt Porter
- [U-Boot] [PATCH 2/6] am33xx: Enable UART{1,2,4,5} pin-mux
Matt Porter
- [U-Boot] [PATCH 6/6] am335x_evm: Enable use of UART{1,2,4,5}
Matt Porter
- [U-Boot] [PATCH] TQM8xx: adjust linker script to grown code size
Marek Vasut
- [U-Boot] [PATCH v3 07/18] tegra: Add support for PWM
Simon Glass
- [U-Boot] [PATCH v3 06/18] tegra: fdt: Add LCD definitions for Tegra
Simon Glass
- [U-Boot] [PATCH 1/4 V2] COMMON: Add __stringify() function
Marek Vasut
- [U-Boot] [PATCH 0/6] add zip command support for uboot
Tom Rini
- [U-Boot] [PATCH v3 06/18] tegra: fdt: Add LCD definitions for Tegra
Stephen Warren
- [U-Boot] [PATCH 1/6] am33xx: Enable UART{1,2,4,5} clocks
Marek Vasut
- [U-Boot] [U-Boot, v3] FAT: Make it possible to read from any file position
Tom Rini
- [U-Boot] malloc: remove extern declarations of malloc_bin_reloc() in board.c files
Tom Rini
- [U-Boot] [U-Boot,1/2] patman: Use reverse order for changelog
Tom Rini
- [U-Boot] env: remove duplicated env_get_char_spec()
Tom Rini
- [U-Boot] env: checkpatch clean env_fat
Tom Rini
- [U-Boot] [U-Boot, 1/4] lib: vsprintf.c: fix checkpath.pl warnings
Tom Rini
- [U-Boot] [U-Boot, 2/4] lib: vsprintf.c: replace NUM_TYPE with s64/u64 types
Tom Rini
- [U-Boot] [U-Boot, 3/4] common: cmd_elf.c: fix checkpath.pl warnings
Tom Rini
- [U-Boot] [U-Boot, 4/4] common: cmd_elf.c: use uintptr_t for casts from u32 to void*
Tom Rini
- [U-Boot] [PATCH 1/6] am33xx: Enable UART{1,2,4,5} clocks
Tom Rini
- [U-Boot] [PATCH 4/6] console & omap-common/spl: Enable use of eserial
Marek Vasut
- [U-Boot] [PATCH resend 1/3] tegra20: complete periph_id enum
Tom Warren
- [U-Boot] [PATCH] tegra: enable CONFIG_CMD_PART
Tom Warren
- [U-Boot] [PATCH 1/6] am33xx: Enable UART{1,2,4,5} clocks
Marek Vasut
- [U-Boot] [PATCH 1/6] am33xx: Enable UART{1,2,4,5} clocks
Tom Rini
- [U-Boot] [PATCH 1/6] am33xx: Enable UART{1,2,4,5} clocks
Marek Vasut
- [U-Boot] [PATCH 1/6] am33xx: Enable UART{1,2,4,5} clocks
Tom Rini
- [U-Boot] [PATCH v4 0/6] tegra: Add NAND flash support
Simon Glass
- [U-Boot] KernelDoc
Tom Rini
- [U-Boot] [PATCH 1/6] am33xx: Enable UART{1,2,4,5} clocks
Marek Vasut
- [U-Boot] [PATCH v3 09/18] tegra: Add LCD driver
Simon Glass
- [U-Boot] KernelDoc
Fabio Estevam
- [U-Boot] Pull request: u-boot-net.git master
Joe Hershberger
- [U-Boot] [PATCH v3 08/18] tegra: Add SOC support for display/lcd
Simon Glass
- [U-Boot] [PATCH 1/6] am33xx: Enable UART{1,2,4,5} clocks
Tom Rini
- [U-Boot] [PATCH v3 11/18] arm: Add control over cachability of memory regions
Simon Glass
- [U-Boot] [PATCH v7 20/29] ARM: SPL: Convert davinci to CONFIG_SPL_FRAMEWORK
Tom Rini
- [U-Boot] RMII ethernet problems on i.MX6 Solo
Carolyn Smith
- [U-Boot] RMII ethernet problems on i.MX6 Solo
Troy Kisky
- [U-Boot] RMII ethernet problems on i.MX6 Solo
Fabio Estevam
- [U-Boot] [PATCH v2 11/19] tegra: Add LCD support to Nvidia boards
Simon Glass
- [U-Boot] [PATCH v3 12/18] lcd: Add CONFIG_LCD_ALIGNMENT to select frame buffer alignment
Simon Glass
- [U-Boot] [PATCH v3 17/18] lcd: Add CONSOLE_SCROLL_LINES option to speed console
Simon Glass
- [U-Boot] [PATCH v3 06/18] tegra: fdt: Add LCD definitions for Tegra
Simon Glass
- [U-Boot] [PATCH] usb: ehci: don't print debug output
Lucas Stach
- [U-Boot] [PATCH v7 0/29] ARM: SPL: Make more generic, merge DaVinci and OMAP
Tom Rini
- [U-Boot] Pull request: u-boot-net.git master
Tom Rini
- [U-Boot] [PATCH v2 01/14] mx5/6: Define default SoC input clock frequencies
Benoît Thébaudeau
- [U-Boot] [PATCH v2 02/14] mx5 clocks: Cleanup
Benoît Thébaudeau
- [U-Boot] [PATCH v2 03/14] mx5: Use explicit clock gate names
Benoît Thébaudeau
- [U-Boot] [PATCH v2 04/14] mx5: Fix clock gate values
Benoît Thébaudeau
- [U-Boot] [PATCH v2 05/14] mx51: Fix USB PHY clocks
Benoît Thébaudeau
- [U-Boot] [PATCH v2 06/14] mx5 clocks: Add and use CCSR definitions
Benoît Thébaudeau
- [U-Boot] [PATCH v2 07/14] mx5 clocks: Fix get_lp_apm()
Benoît Thébaudeau
- [U-Boot] [PATCH v2 08/14] mx5 clocks: Fix get_periph_clk()
Benoît Thébaudeau
- [U-Boot] [PATCH v2 09/14] mx5 clocks: Fix get_ipg_per_clk()
Benoît Thébaudeau
- [U-Boot] [PATCH v2 10/14] mx5 clocks: Fix get_uart_clk()
Benoît Thébaudeau
- [U-Boot] [PATCH v2 11/14] mx5 clocks: Simplify imx_get_cspiclk()
Benoît Thébaudeau
- [U-Boot] [PATCH v2 12/14] mx5 clocks: Fix MXC_FEC_CLK
Benoît Thébaudeau
- [U-Boot] [PATCH v2 13/14] mx51: Fix I2C clock ID check
Benoît Thébaudeau
- [U-Boot] [PATCH v2 14/14] mx5/6 clocks: Fix SDHC clocks
Benoît Thébaudeau
- [U-Boot] [PATCH v2] mx35: Fix eSDHC clocks
Benoît Thébaudeau
- [U-Boot] [PATCH 1/7] mx25: Fix decode_pll
Benoît Thébaudeau
- [U-Boot] [PATCH v3 06/18] tegra: fdt: Add LCD definitions for Tegra
Simon Glass
- [U-Boot] [PATCH 2/7] mx25: Clean up clock calculations
Benoît Thébaudeau
- [U-Boot] [PATCH 3/7] mx25: Define more standard clocks
Benoît Thébaudeau
- [U-Boot] [PATCH 4/7] mx25 clocks: Fix MXC_FEC_CLK
Benoît Thébaudeau
- [U-Boot] [PATCH 5/7] mx25: Clean up clocks API
Benoît Thébaudeau
- [U-Boot] [PATCH 6/7] mx25: Define cpu_eth_init() only if needed
Benoît Thébaudeau
- [U-Boot] [PATCH 7/7] mx25: Fix eSDHC support
Benoît Thébaudeau
- [U-Boot] [PATCH v3 6/8] fdt: cmd_fdt: Call fdt_chosen() from "fdt boardsetup"
Kumar Gala
- [U-Boot] [PATCH] mxc: Fix SDHC multi-instance clock
Benoît Thébaudeau
- [U-Boot] [PATCH v3 6/8] fdt: cmd_fdt: Call fdt_chosen() from "fdt boardsetup"
McClintock Matthew-B29882
- [U-Boot] [PATCH v2 05/14] mx51: Fix USB PHY clocks
Marek Vasut
- [U-Boot] [PATCH 6/7] mx25: Define cpu_eth_init() only if needed
Fabio Estevam
- [U-Boot] [PATCH 1/2] Tegra20: Move some code files to common directories for upcoming Tegra30 patches.
Simon Glass
- [U-Boot] [PATCH 2/2] Tegra20: Move some include files to arch-tegra for sharing with Tegra30
Simon Glass
- [U-Boot] [PATCH v2 01/19] Add gpio_request() to asm-generic header
Simon Glass
- [U-Boot] RMII ethernet problems on i.MX6 Solo
Carolyn Smith
- [U-Boot] [PATCH] nand: Extending the nand_ecclayout struct based on Linux 3.5
Charles Hardin
- [U-Boot] [PATCH 6/7] mx25: Define cpu_eth_init() only if needed
Benoît Thébaudeau
- [U-Boot] [PATCH] nand: add ID for Micron MT29F8G08A
Lucas Stach
- [U-Boot] [PATCH 1/2] tegra: clean up board include hell
Lucas Stach
- [U-Boot] [PATCH 2/2] tegra: nand: add board pinmux
Lucas Stach
- [U-Boot] [PATCH] tegra: add Colibri T20 board support
Lucas Stach
- [U-Boot] [PATCH] nand: add ID for Micron MT29F8G08A
Scott Wood
- [U-Boot] [PATCH] nand: add ID for Micron MT29F8G08A
Lucas Stach
- [U-Boot] [PATCH] nand: add ID for Micron MT29F8G08A
Scott Wood
- [U-Boot] [PATCH] nand: add ID for Micron MT29F8G08A
Lucas Stach
- [U-Boot] [PATCH v3] usb: ehci: don't print debug output
Lucas Stach
- [U-Boot] [PATCH] nand: add ID for Micron MT29F8G08A
Scott Wood
- [U-Boot] [PATCH 1/2] tegra: clean up board include hell
Stephen Warren
- [U-Boot] [PATCH 2/2] tegra: nand: add board pinmux
Stephen Warren
- [U-Boot] [PATCH 1/2] tegra: clean up board include hell
Lucas Stach
- [U-Boot] [RFC PATCH v2 0/5] Add environment call-back capability
Joe Hershberger
- [U-Boot] [RFC PATCH v2 1/5] env: Add support for callbacks to environment vars
Joe Hershberger
- [U-Boot] [RFC PATCH v2 2/5] env: Add a loadaddr env handler
Joe Hershberger
- [U-Boot] [RFC PATCH v2 3/5] env: Add a bootfile env handler
Joe Hershberger
- [U-Boot] [RFC PATCH v2 4/5] env: Add a baudrate env handler
Joe Hershberger
- [U-Boot] [RFC PATCH v2 5/5] env: Add a console env handler
Joe Hershberger
- [U-Boot] [PATCH] tegra: add Colibri T20 board support
Stephen Warren
- [U-Boot] [PATCH 1/2] tegra: clean up board include hell
Simon Glass
- [U-Boot] [PATCH] tegra: add Colibri T20 board support
Lucas Stach
- [U-Boot] [PATCH] tegra: add funcmux entry for NAND attached to KBC
Lucas Stach
- [U-Boot] [PATCH 2/2] tegra: nand: add board pinmux
Simon Glass
- [U-Boot] [PATCH] tegra: add Colibri T20 board support
Stephen Warren
- [U-Boot] [PATCH] tegra: add Colibri T20 board support
Lucas Stach
- [U-Boot] [PATCH] tegra: add funcmux entry for NAND attached to KBC
Stephen Warren
- [U-Boot] [PATCH v1 2/4] mpc83xx: add support for mpc8309
Kim Phillips
- [U-Boot] [PATCH v3 06/18] tegra: fdt: Add LCD definitions for Tegra
Stephen Warren
- [U-Boot] [PATCH 1/2] tegra: clean up board include hell
Stephen Warren
- [U-Boot] [PATCH v3 06/18] tegra: fdt: Add LCD definitions for Tegra
Simon Glass
- [U-Boot] [PATCH 1/2] tegra: clean up board include hell
Simon Glass
- [U-Boot] [PATCH] add check infrastructure, default sparse
Tom Rini
- [U-Boot] KernelDoc
Graeme Russ
- [U-Boot] New patch tracking tool - where to now?
Graeme Russ
- [U-Boot] KernelDoc
Scott Wood
- [U-Boot] KernelDoc
Marek Vasut
- [U-Boot] KernelDoc
Marek Vasut
- [U-Boot] [PATCH v4 0/16] tegra: Add display driver and LCD support for Seaboard
Simon Glass
- [U-Boot] [PATCH v4 01/16] tegra: Use const for pinmux_config_pingroup/table()
Simon Glass
- [U-Boot] [PATCH v4 02/16] tegra: Add display support to funcmux
Simon Glass
- [U-Boot] [PATCH v4 03/16] tegra: fdt: Add pwm binding and node
Simon Glass
- [U-Boot] [PATCH v4 04/16] tegra: fdt: Add LCD definitions for Tegra
Simon Glass
- [U-Boot] [PATCH v4 05/16] tegra: Add support for PWM
Simon Glass
- [U-Boot] [PATCH v4 06/16] tegra: Add SOC support for display/lcd
Simon Glass
- [U-Boot] [PATCH v4 07/16] tegra: Add LCD driver
Simon Glass
- [U-Boot] [PATCH v4 08/16] tegra: Add LCD support to Nvidia boards
Simon Glass
- [U-Boot] [PATCH v4 09/16] arm: Add control over cachability of memory regions
Simon Glass
- [U-Boot] [PATCH v4 10/16] lcd: Add CONFIG_LCD_ALIGNMENT to select frame buffer alignment
Simon Glass
- [U-Boot] [PATCH v4 11/16] lcd: Add support for flushing LCD fb from dcache after update
Simon Glass
- [U-Boot] [PATCH v4 12/16] tegra: Align LCD frame buffer to section boundary
Simon Glass
- [U-Boot] [PATCH v4 13/16] tegra: Support control of cache settings for LCD
Simon Glass
- [U-Boot] [PATCH v4 14/16] tegra: fdt: Add LCD definitions for Seaboard
Simon Glass
- [U-Boot] [PATCH v4 15/16] lcd: Add CONSOLE_SCROLL_LINES option to speed console
Simon Glass
- [U-Boot] [PATCH v4 16/16] tegra: Enable display/lcd support on Seaboard
Simon Glass
- [U-Boot] [PATCH] MAKEALL: add a -C/--check option to enable build checking
Kim Phillips
- [U-Boot] [PATCH] patman: Support Series-name tag to name a series
Simon Glass
- [U-Boot] [PATCH 0/4] Keyboard input improvements
Simon Glass
- [U-Boot] [PATCH 1/4] input: Correct key_matrix fdt decoding
Simon Glass
- [U-Boot] [PATCH 2/4] input: Separate out keyboard repeat/delay from init
Simon Glass
- [U-Boot] [PATCH 3/4] input: Allow key ghosting filter to be disabled
Simon Glass
- [U-Boot] [PATCH 4/4] input: Add debugging for key matrix key codes
Simon Glass
- [U-Boot] [PATCH] patman: Handle checkpatch.pl not providing file/line info
Simon Glass
- [U-Boot] [PATCH] arm: fdt: Relocate fdt along with other data
Simon Glass
- [U-Boot] Custodians, Maintainers and old platforms
R, Sricharan
- [U-Boot] [PATCH] tools: Add cleanpatch
Fabio Estevam
- [U-Boot] [PATCH] tools: Add cleanpatch
Marek Vasut
- [U-Boot] [PATCH v3 06/18] tegra: fdt: Add LCD definitions for Tegra
Thierry Reding
- [U-Boot] [RFC PATCH v2 1/5] env: Add support for callbacks to environment vars
Marek Vasut
- [U-Boot] [PATCH v4 2/2] ARM: kirkwood/orion5x: Use reset_cpu definition in include/common.h
Prafulla Wadaskar
- [U-Boot] [PATCH] edminiv2: increase malloc len to 256K
Prafulla Wadaskar
- [U-Boot] [PATCH 2/2] km_kirkwood: enable MV88E6352_SWITCH support for kmnusa
Prafulla Wadaskar
- [U-Boot] [PATCH v2 1/2] arm/km: add mv88e6352 configuration for kmnusa
Prafulla Wadaskar
- [U-Boot] Problems with a P2020 board
Mark Marshall
- [U-Boot] [PATCH 1/2] Tegra20: Move some code files to common directories for upcoming Tegra30 patches.
Igor Grinberg
- [U-Boot] [PATCH 2/2] Tegra20: Move some include files to arch-tegra for sharing with Tegra30
Igor Grinberg
- [U-Boot] [PATCH v2 05/14] mx51: Fix USB PHY clocks
Igor Grinberg
- [U-Boot] Pull request: u-boot-video/master
Igor Grinberg
- [U-Boot] Pull request: u-boot-video/master
Igor Grinberg
- [U-Boot] [PATCH v3 1/2] usb: ulpi: add indicator configuration function
Igor Grinberg
- [U-Boot] Pull request: u-boot-video/master
Anatolij Gustschin
- [U-Boot] [PATCH v3 2/2] tegra20: add USB ULPI init code
Igor Grinberg
- [U-Boot] [PATCH v2] mx6: Remove lowlevel_init.S
Stefano Babic
- [U-Boot] [PATCH v4 0/6] Code cleaup for trats and universal
Minkyu Kang
- [U-Boot] [PATCH v2 01/14] mx5/6: Define default SoC input clock frequencies
Stefano Babic
- [U-Boot] [PATCH v2 02/14] mx5 clocks: Cleanup
Stefano Babic
- [U-Boot] Pull request: u-boot-video/master
Igor Grinberg
- [U-Boot] [PATCH v2 03/14] mx5: Use explicit clock gate names
Stefano Babic
- [U-Boot] [PATCH 6/7] mx25: Define cpu_eth_init() only if needed
Stefano Babic
- [U-Boot] [PATCH 1/2] remove unnecessary code in ata_piix
Pavel Herrmann
- [U-Boot] [PATCH v2 2/2] Fix checkpatch warnings about externs in *.c
Pavel Herrmann
- [U-Boot] [PATCH] omap4_panda: remove CONFIG_PANDA, not used
Peter Meerwald
- [U-Boot] [PATCH v6 1/2] Loop block device for sandbox
Pavel Herrmann
- [U-Boot] [PATCH v2 09/14] mx5 clocks: Fix get_ipg_per_clk()
Stefano Babic
- [U-Boot] [PATCH v4 2/2] ARM: kirkwood/orion5x: Use reset_cpu definition in include/common.h
Pavel Machek
- [U-Boot] [PATCH] omap4_panda: remove CONFIG_PANDA, not used
R, Sricharan
- [U-Boot] [PATCH] pmc405de and zeus: remove the env_ptr externs
Igor Grinberg
- [U-Boot] [PATCH] pmc405de and zeus: remove the env_ptr externs
Stefan Roese
- [U-Boot] [PATCH v2 05/14] mx51: Fix USB PHY clocks
Benoît Thébaudeau
- [U-Boot] [PATCH 5/7] mx25: Clean up clocks API
Stefano Babic
- [U-Boot] [PATCH 4/7] mx25 clocks: Fix MXC_FEC_CLK
Stefano Babic
- [U-Boot] [PATCH v4 0/4] Exynos: Support for display drivers
Piotr Wilczek
- [U-Boot] [PATCH v4 1/4] misc:max8998 Add LDO macros
Piotr Wilczek
- [U-Boot] [PATCH v4 2/4] drivers: video: Add ld9040 video driver
Piotr Wilczek
- [U-Boot] [PATCH v4 3/4] drivers: video: fix image position
Piotr Wilczek
- [U-Boot] [PATCH v4 4/4] exynos4: universal_C210: add display support
Piotr Wilczek
- [U-Boot] [PATCH v2 09/14] mx5 clocks: Fix get_ipg_per_clk()
Benoît Thébaudeau
- [U-Boot] [PATCH v2 05/14] mx51: Fix USB PHY clocks
Stefano Babic
- [U-Boot] [PATCH v2 09/14] mx5 clocks: Fix get_ipg_per_clk()
Stefano Babic
- [U-Boot] [U-Boot, v3] FAT: Make it possible to read from any file position
Benoît Thébaudeau
- [U-Boot] [PATCH] tools: Add cleanpatch
Otavio Salvador
- [U-Boot] [PATCH v2 09/14] mx5 clocks: Fix get_ipg_per_clk()
Benoît Thébaudeau
- [U-Boot] [PATCH v2 05/14] mx51: Fix USB PHY clocks
Benoît Thébaudeau
- [U-Boot] [PATCH] mxc: Fix SDHC multi-instance clock
Benoît Thébaudeau
- [U-Boot] [PATCH] tools: Add cleanpatch
Fabio Estevam
- [U-Boot] [PATCH v2] mx6: Remove lowlevel_init.S
Fabio Estevam
- [U-Boot] [PATCH] tools: Add cleanpatch
Otavio Salvador
- [U-Boot] [PATCH v2] mx6: Remove lowlevel_init.S
Benoît Thébaudeau
- [U-Boot] [PATCH v2] tools: Add cleanpatch
Fabio Estevam
- [U-Boot] [PATCH v2] mx6: Remove lowlevel_init.S
Benoît Thébaudeau
- [U-Boot] [PATCH v1 2/4] mpc83xx: add support for mpc8309
Gerlando Falauto
- [U-Boot] [PATCH V2 0/6] add zip command support for uboot
Lei Wen
- [U-Boot] [PATCH V2 1/6] lib: zlib: import deflate source file from 1.2.5
Lei Wen
- [U-Boot] [PATCH V2 2/6] lib: zlib: import trees file from 1.2.5
Lei Wen
- [U-Boot] [PATCH V2 3/6] lib: zlib: include deflate into zlib build
Lei Wen
- [U-Boot] [PATCH V2 4/6] lib: zlib: remove the limitation for cannot using 0 as start
Lei Wen
- [U-Boot] [PATCH V2 5/6] lib: add gzip lib function callback
Lei Wen
- [U-Boot] [PATCH V2 6/6] common: add zip command support
Lei Wen
- [U-Boot] [PATCH 0/6] add zip command support for uboot
Lei Wen
- [U-Boot] [PATCH v3 1/2] usb: ulpi: add indicator configuration function
Lucas Stach
- [U-Boot] [PATCH v4 15/16] lcd: Add CONSOLE_SCROLL_LINES option to speed console
Lucas Stach
- [U-Boot] [PATCH v2] mx6: Remove lowlevel_init.S
Stefano Babic
- [U-Boot] [PATCH] printenv show garbage on out-of-memory conditions
Maxime Larocque
- [U-Boot] [PATCH v2 09/14] mx5 clocks: Fix get_ipg_per_clk()
Stefano Babic
- [U-Boot] [PATCH v2 05/14] mx51: Fix USB PHY clocks
Stefano Babic
- [U-Boot] [PATCH] nand: add ID for Micron MT29F8G08A
Lucas Stach
- [U-Boot] RMII ethernet problems on i.MX6 Solo
Carolyn Smith
- [U-Boot] [PATCH] arm: fdt: Relocate fdt along with other data
Stephen Warren
- [U-Boot] RMII ethernet problems on i.MX6 Solo
Fabio Estevam
- [U-Boot] [PATCH] disk: allow - or empty string to fall back to $bootdevice
Stephen Warren
- [U-Boot] [U-Boot, v3] FAT: Make it possible to read from any file position
Stephen Warren
- [U-Boot] [GIT PULL] Pull request: u-boot-imx
Stefano Babic
- [U-Boot] [PATCH] api: net: fix length check in eth_receive()
Joe Hershberger
- [U-Boot] [PATCH] net: bugfix: NetSetTimeout assumes CONFIG_SYS_HZ=1000
Joe Hershberger
- [U-Boot] [U-Boot-DM] [PATCH 09/10] dm: net: Move IXP NPE to drivers/net/
Joe Hershberger
- [U-Boot] [PATCH v1 2/4] mpc83xx: add support for mpc8309
Kim Phillips
- [U-Boot] [PATCH 4/5] net: emaclite: Support OF initialization
Joe Hershberger
- [U-Boot] [U-Boot-DM] [PATCH] dm: net: Fixup the armada100 FEC driver
Joe Hershberger
- [U-Boot] [PATCH] net: sh_eth: Add support R8A7740 of rmobile (arm core)
Joe Hershberger
- [U-Boot] [PATCH] tegra: nand: make ONFI detection work
Lucas Stach
- [U-Boot] [PATCHv2 1/5] net: introduce transparent driver private in ueth_data
Joe Hershberger
- [U-Boot] [PATCHv2 2/5] net: asix: split out basic reset function
Joe Hershberger
- [U-Boot] [PATCHv2 3/5] net: asix: add write_hwaddr function
Joe Hershberger
- [U-Boot] [PATCHv2 4/5] net: asix: add read_mac function
Joe Hershberger
- [U-Boot] [PATCHv2 5/5] net: asix: add AX88772B support
Joe Hershberger
- [U-Boot] [PATCH 2/4 v3] net: Add driver for Zynq Gem IP
Joe Hershberger
- [U-Boot] [PATCH] eth_write_hwaddr: Return error for invalid MACs
Joe Hershberger
- [U-Boot] [PATCH] net/phy: support the mv88e6352 switch
Joe Hershberger
- [U-Boot] [PATCH 1/2] Add Vitesse VSC8662 PHY support
Joe Hershberger
- [U-Boot] [PATCH 1/2] FEC: Do not pass unaligned buffer to network stack
Joe Hershberger
- [U-Boot] [PATCH 2/2] FEC: Properly align address over the buffers for cache ops
Joe Hershberger
- [U-Boot] [PATCH 1/3] FEC: Remove endless loop in the FEC driver
Joe Hershberger
- [U-Boot] [PATCH 2/3] FEC: Rework the TX wait mechanism
Joe Hershberger
- [U-Boot] [PATCH 3/3] FEC: Replace magic contants
Joe Hershberger
- [U-Boot] [PATCH v4] PXE: FDT: Add support for fdt in PXE
Joe Hershberger
- [U-Boot] [PATCH] Quietly ignore DHCP Option 28 (Broadcast Address)
Joe Hershberger
- [U-Boot] [PATCH] disk: allow - or empty string to fall back to $bootdevice
Tom Rini
- [U-Boot] [U-Boot, v3] FAT: Make it possible to read from any file position
Tom Rini
- [U-Boot] UBI problems on current u-boot
Charles Hardin
- [U-Boot] [PATCH v3 05/14] mx51: Fix USB PHY clocks
Benoît Thébaudeau
- [U-Boot] [PATCH 1/2] remove unnecessary code in ata_piix
Marek Vasut
- [U-Boot] [PATCH v2 2/2] Fix checkpatch warnings about externs in *.c
Marek Vasut
- [U-Boot] [PATCH v6 1/2] Loop block device for sandbox
Marek Vasut
- [U-Boot] [PATCH] sandbox: Add asm/errno.h
Simon Glass
- [U-Boot] [PATCH 1/3] FEC: Remove endless loop in the FEC driver
Marek Vasut
- [U-Boot] [PATCH 1/2] remove unnecessary code in ata_piix
Tom Rini
- [U-Boot] [PATCH 0/6] bootstage: Add a number of new features
Simon Glass
- [U-Boot] [PATCH 1/6] bootstage: Export bootstage_add_record() function
Simon Glass
- [U-Boot] [PATCH 2/6] bootstage: Add time accumulation feature
Simon Glass
- [U-Boot] [PATCH 3/6] bootstage: Store boot timings in device tree
Simon Glass
- [U-Boot] [PATCH 4/6] bootstage: Add feature to stash/unstash bootstage info
Simon Glass
- [U-Boot] [PATCH 5/6] bootstage: Add bootstage command
Simon Glass
- [U-Boot] [PATCH 6/6] bootstage: Add new bootstage IDs for board, LCD
Simon Glass
- [U-Boot] [PATCH 4/4 v4] xilinx: Add new Zynq board
Albert ARIBAUD
- [U-Boot] [PATCH v2 2/2] Fix checkpatch warnings about externs in *.c
Tom Rini
- [U-Boot] KernelDoc
Marek Vasut
- [U-Boot] [PATCH 4/4 v5] xilinx: Add new Zynq board
Michal Simek
- [U-Boot] [PATCH 4/4 v4] xilinx: Add new Zynq board
Michal Simek
- [U-Boot] [PATCH v4 03/16] tegra: fdt: Add pwm binding and node
Thierry Reding
- [U-Boot] [PATCH] tegra: nand: make ONFI detection work
Stephen Warren
- [U-Boot] help with archos g9 "port"
SxDx
- [U-Boot] question
pflora at libero.it
- [U-Boot] Custodians, Maintainers and old platforms
Marek Vasut
- [U-Boot] [PATCH] tegra: nand: make ONFI detection work
Scott Wood
- [U-Boot] [PATCH v3 2/8] SPL: Port SPL framework to powerpc
Scott Wood
- [U-Boot] [PATCH v3 2/8] SPL: Port SPL framework to powerpc
Tom Rini
- [U-Boot] [PATCH 1/2] spi: Add progress percentage and write speed to `sf update`
Simon Glass
- [U-Boot] [PATCH 2/2] spi: Add SPI flash test
Simon Glass
- [U-Boot] [PATCH 00/70 V2] serial: Massive rework of the serial subsystem
Marek Vasut
- [U-Boot] [PATCH 01/70] serial: Coding style cleanup of struct serial_device
Marek Vasut
- [U-Boot] [PATCH 02/70] serial: Rename .init() and .uninit() in serial_device
Marek Vasut
- [U-Boot] [PATCH 03/70] serial: Properly spell out the structure member names of serial_driver
Marek Vasut
- [U-Boot] [PATCH 04/70] serial: pxa: Implement default_serial_console in serial_pxa.c
Marek Vasut
- [U-Boot] [PATCH 05/70] serial: pxa: Make use of default_serial_console in serial_pxa
Marek Vasut
- [U-Boot] [PATCH 06/70] serial: pxa: Make local functions static
Marek Vasut
- [U-Boot] [PATCH 07/70] serial: mpc512x: Properly define CONFIG_SYS_PSC3 in config files
Marek Vasut
- [U-Boot] [PATCH 08/70] serial: Implement serial_initfunc() macro
Marek Vasut
- [U-Boot] [PATCH 09/70] serial: mpc8xx: Move serial registration from serial_initialize()
Marek Vasut
- [U-Boot] [PATCH 10/70] serial: s3c24xx: Move serial registration from serial_initialize()
Marek Vasut
- [U-Boot] [PATCH 11/70] serial: pxa: Move serial registration from serial_initialize()
Marek Vasut
- [U-Boot] [PATCH 12/70] serial: s5p: Move serial registration from serial_initialize()
Marek Vasut
- [U-Boot] [PATCH 13/70] serial: microblaze: Move serial registration from serial_initialize()
Marek Vasut
- [U-Boot] [PATCH 14/70] serial: mpc512x: Move serial registration from serial_initialize()
Marek Vasut
- [U-Boot] [PATCH 15/70] serial: ns16550: Move serial registration from serial_initialize()
Marek Vasut
- [U-Boot] [PATCH 16/70] serial: bfin: Remove the bfin_serialN_device exports from serial.h
Marek Vasut
- [U-Boot] [PATCH 17/70] serial: bfin: Adjust serial_register_bfin_uart()
Marek Vasut
- [U-Boot] [PATCH 18/70] serial: zoom2: Remove zoom2 serial prototypes from serial.h
Marek Vasut
- [U-Boot] [PATCH 19/70] serial: bfin: Flip the jtag serial console to CONFIG_SERIAL_MULTI
Marek Vasut
- [U-Boot] [PATCH 20/70] serial: mips: Implement CONFIG_SERIAL_MULTI into au1x00 serial driver
Marek Vasut
- [U-Boot] [PATCH 21/70] serial: mips: Implement CONFIG_SERIAL_MULTI into asc serial driver
Marek Vasut
- [U-Boot] [PATCH 22/70] serial: mips: Implement CONFIG_SERIAL_MULTI into JZ serial driver
Marek Vasut
- [U-Boot] [PATCH 23/70] serial: powerpc: Implement CONFIG_SERIAL_MULTI into mpc5xx serial driver
Marek Vasut
- [U-Boot] [PATCH 24/70] serial: powerpc: Implement CONFIG_SERIAL_MULTI into mpc8220 serial driver
Marek Vasut
- [U-Boot] [PATCH 25/70] serial: powerpc: Implement CONFIG_SERIAL_MULTI into mpc8260 serial drivers
Marek Vasut
- [U-Boot] [PATCH 26/70] serial: powerpc: Implement CONFIG_SERIAL_MULTI into mpc85xx serial driver
Marek Vasut
- [U-Boot] [PATCH 27/70] serial: powerpc: Implement CONFIG_SERIAL_MULTI into iop480 serial driver
Marek Vasut
- [U-Boot] [PATCH 28/70] serial: sparc: Implement CONFIG_SERIAL_MULTI into leon2 serial driver
Marek Vasut
- [U-Boot] [PATCH 29/70] serial: sparc: Implement CONFIG_SERIAL_MULTI into leon3 serial driver
Marek Vasut
- [U-Boot] [PATCH 30/70] serial: powerpc: Implement CONFIG_SERIAL_MULTI into marvell serial driver
Marek Vasut
- [U-Boot] [PATCH 31/70] serial: powerpc: Implement CONFIG_SERIAL_MULTI into amirix serial driver
Marek Vasut
- [U-Boot] [PATCH 32/70] serial: powerpc: Implement CONFIG_SERIAL_MULTI into bmw serial driver
Marek Vasut
- [U-Boot] [PATCH 33/70] serial: powerpc: Implement CONFIG_SERIAL_MULTI into cogent serial driver
Marek Vasut
- [U-Boot] [PATCH 34/70] serial: powerpc: Implement CONFIG_SERIAL_MULTI into cpci750 serial driver
Marek Vasut
- [U-Boot] [PATCH 35/70] serial: powerpc: Implement CONFIG_SERIAL_MULTI into evb64260 serial driver
Marek Vasut
- [U-Boot] [PATCH 36/70] serial: powerpc: Implement CONFIG_SERIAL_MULTI into ml2 serial driver
Marek Vasut
- [U-Boot] [PATCH 37/70] serial: powerpc: Implement CONFIG_SERIAL_MULTI into sconsole serial driver
Marek Vasut
- [U-Boot] [PATCH 38/70] serial: powerpc: Implement CONFIG_SERIAL_MULTI into p3mx serial driver
Marek Vasut
- [U-Boot] [PATCH 39/70] serial: arm: Implement CONFIG_SERIAL_MULTI into altera_jtag serial driver
Marek Vasut
- [U-Boot] [PATCH 40/70] serial: arm: Implement CONFIG_SERIAL_MULTI into altera serial driver
Marek Vasut
- [U-Boot] [PATCH 41/70] serial: arm: Implement CONFIG_SERIAL_MULTI into atmel serial driver
Marek Vasut
- [U-Boot] [PATCH 42/70] serial: arm: Implement CONFIG_SERIAL_MULTI into lpc32xx serial driver
Marek Vasut
- [U-Boot] [PATCH 43/70] serial: mcf: Implement CONFIG_SERIAL_MULTI into MCF serial driver
Marek Vasut
- [U-Boot] [PATCH 44/70] serial: Implement CONFIG_SERIAL_MULTI into ns9750 serial driver
Marek Vasut
- [U-Boot] [PATCH 45/70] serial: oc: Implement CONFIG_SERIAL_MULTI into OpenCores serial driver
Marek Vasut
- [U-Boot] [PATCH 46/70] serial: arm: Implement CONFIG_SERIAL_MULTI into s3c4510b serial driver
Marek Vasut
- [U-Boot] [PATCH 47/70] serial: arm: Implement CONFIG_SERIAL_MULTI into s3c64xx serial driver
Marek Vasut
- [U-Boot] [PATCH 48/70] serial: sandbox: Implement CONFIG_SERIAL_MULTI into sandbox serial driver
Marek Vasut
- [U-Boot] [PATCH 49/70] serial: arm: Implement CONFIG_SERIAL_MULTI into clps7111 serial driver
Marek Vasut
- [U-Boot] [PATCH 50/70] serial: arm: Implement CONFIG_SERIAL_MULTI into imx serial driver
Marek Vasut
- [U-Boot] [PATCH 51/70] serial: arm: Implement CONFIG_SERIAL_MULTI into ixp serial driver
Marek Vasut
- [U-Boot] [PATCH 52/70] serial: arm: Implement CONFIG_SERIAL_MULTI into ks8695 serial driver
Marek Vasut
- [U-Boot] [PATCH 53/70] serial: arm: Implement CONFIG_SERIAL_MULTI into lh7a40x serial driver
Marek Vasut
- [U-Boot] [PATCH 54/70] serial: arm: Implement CONFIG_SERIAL_MULTI into lpc2292 serial driver
Marek Vasut
- [U-Boot] [PATCH 55/70] serial: Implement CONFIG_SERIAL_MULTI into max3100 serial driver
Marek Vasut
- [U-Boot] [PATCH 56/70] serial: arm: Implement CONFIG_SERIAL_MULTI into mxc serial driver
Marek Vasut
- [U-Boot] [PATCH 57/70] serial: arm: Implement CONFIG_SERIAL_MULTI into netarm serial driver
Marek Vasut
- [U-Boot] [PATCH 58/70] serial: arm: Implement CONFIG_SERIAL_MULTI into pl01x serial driver
Marek Vasut
- [U-Boot] [PATCH 59/70] serial: arm: Implement CONFIG_SERIAL_MULTI into s3c44b0 serial driver
Marek Vasut
- [U-Boot] [PATCH 60/70] serial: arm: Implement CONFIG_SERIAL_MULTI into sa1100 serial driver
Marek Vasut
- [U-Boot] [PATCH 61/70] serial: sh: Implement CONFIG_SERIAL_MULTI into sh serial driver
Marek Vasut
- [U-Boot] [PATCH 62/70] serial: mxs: spl: Remove empty serial_* functions from SPL code
Marek Vasut
- [U-Boot] [PATCH 63/70] serial: ns16550: Call usbtty_poll only in non-SPL build
Marek Vasut
- [U-Boot] [PATCH 64/70] serial: Use puts() and hang() instead of panic() in SPL
Marek Vasut
- [U-Boot] [PATCH 65/70] serial: Unconditionally enable CONFIG_SERIAL_MULTI
Marek Vasut
- [U-Boot] [PATCH 66/70] serial: Remove CONFIG_SERIAL_MULTI from config files
Marek Vasut
- [U-Boot] [PATCH 67/70] serial: Remove CONFIG_SERIAL_MULTI from serial drivers
Marek Vasut
- [U-Boot] [PATCH 68/70] serial: Remove CONFIG_SERIAL_MULTI from remaining sources
Marek Vasut
- [U-Boot] [PATCH 69/70] serial: Compile common/serial.c by default
Marek Vasut
- [U-Boot] [PATCH 70/70] serial: Enhance the manual relocation
Marek Vasut
- [U-Boot] [PULL] u-boot-testing / dm-stringify
Marek Vasut
- [U-Boot] [PULL] u-boot-testing / dm-serial-1
Marek Vasut
- [U-Boot] [PATCH 0/7] lcd/video: Add parameter API and compressed bitmaps
Simon Glass
- [U-Boot] [PATCH 1/7] video: Provide an API to access video parameters
Simon Glass
- [U-Boot] [PATCH 2/7] video: Implement additional video API functions in cfb_console
Simon Glass
- [U-Boot] [PATCH 3/7] lcd: Provide an API to access LCD parameters
Simon Glass
- [U-Boot] [PATCH 4/7] lcd: Fix BMP decode bug that skips the wrong padded row
Simon Glass
- [U-Boot] [PATCH 5/7] lcd: Fix fb offset calculation for bpix == 16 in BMP display
Simon Glass
- [U-Boot] [PATCH 6/7] lcd: Implement RLE8 bitmap decoding
Simon Glass
- [U-Boot] [PATCH 7/7] video: Skip bitmaps which do not fit into the screen in cfb_console
Simon Glass
- [U-Boot] [PATCH 0/4] Implant kernel-doc from Linux kernel
Marek Vasut
- [U-Boot] [PATCH 1/4] doc: kerneldoc: Implant DocBook from Linux kernel
Marek Vasut
- [U-Boot] [PATCH 2/4] doc: kerneldoc: Add nicer CSS stylesheet for HTML docs
Marek Vasut
- [U-Boot] [PATCH 3/4] doc: kerneldoc: Implement "Example" section handling
Marek Vasut
- [U-Boot] [PATCH 4/4] doc: kerneldoc: tmpl: Implement template for LG-arrays
Marek Vasut
- [U-Boot] [PATCH 0/5 V2] Linker-generated arrays
Marek Vasut
- [U-Boot] [PATCH 1/5] common: Add symbol handling for generic lists into Makefile
Marek Vasut
- [U-Boot] [PATCH 2/5] common: Implement support for linker-generated arrays
Marek Vasut
- [U-Boot] [PATCH 3/5] common: Add .u_boot_list into all linker files
Marek Vasut
- [U-Boot] [PATCH 4/5] common: Convert the U-Boot commands to LG-arrays
Marek Vasut
- [U-Boot] [PATCH 5/5] common: Discard the __u_boot_cmd section
Marek Vasut
- [U-Boot] [PATCH 2/3 V2] common: Implement support for linker-generated arrays
Joe Hershberger
- [U-Boot] [PATCH 1/5 V2] common: Add symbol handling for generic lists into Makefile
Marek Vasut
- [U-Boot] [PATCH 1/4 V2] doc: kerneldoc: Implant DocBook from Linux kernel
Marek Vasut
- [U-Boot] [PATCH 0/5 V2] Linker-generated arrays
Marek Vasut
- [U-Boot] [PATCH 2/3 V2] common: Implement support for linker-generated arrays
Marek Vasut
- [U-Boot] [PULL] please pull u-boot-atmel/master into u-boot-arm/master
Albert ARIBAUD
- [U-Boot] [PATCH] powerpc/srio: Workaround for srio erratrm a004034
Liu Gang
- [U-Boot] [GIT PULL] Pull request: u-boot-imx
Albert ARIBAUD
- [U-Boot] mips port
Dmytro Milinevskyy
- [U-Boot] u-boot/master slight regression with trats
Albert ARIBAUD
- [U-Boot] [PATCH] cmd_fat.c: fix build warning
Anatolij Gustschin
- [U-Boot] include: fix mips64 build warning
Zhi-zhou Zhang
- [U-Boot] include: fix mips64 build warning
Zhi-zhou Zhang
- [U-Boot] [PATCH] cmd_fat.c: fix build warning
Anatolij Gustschin
- [U-Boot] [PATCH] tegra: nand: make ONFI detection work
Lucas Stach
- [U-Boot] [PATCH V2 0/6] add zip command support for uboot
Tom Rini
- [U-Boot] [U-Boot,1/2] remove unnecessary code in ata_piix
Tom Rini
- [U-Boot] u-boot/master slight regression with trats
Albert ARIBAUD
- [U-Boot] [PATCH] cmd_fat.c: fix build warning
Albert ARIBAUD
- [U-Boot] [PATCH] cmd_fat.c: fix build warning
Tom Rini
- [U-Boot] [PATCH] sandbox: Add asm/errno.h
Tom Rini
- [U-Boot] u-boot/master slight regression with trats
Anatolij Gustschin
- [U-Boot] [PATCH] mpc52xx/motionpro: fix monitor size and update default environment
Wolfgang Grandegger
- [U-Boot] [PATCH v2] mx6: Remove lowlevel_init.S
Fabio Estevam
- [U-Boot] [PATCH v2 1/2] tegra: clean up board include hell
Lucas Stach
- [U-Boot] [PATCH v2 2/2] tegra: nand: add board pinmux
Lucas Stach
- [U-Boot] [PATCH v2] tegra: add Colibri T20 board support
Lucas Stach
- [U-Boot] [PATCH v2] mx6: Remove lowlevel_init.S
Benoît Thébaudeau
- [U-Boot] [PATCH v1 0/9] block: Fix some inconsistencies in block_{read, write} implementors
Tom Rini
- [U-Boot] [PATCH v1 1/9] ata_piix: Fix checkpatch issues
Tom Rini
- [U-Boot] [PATCH v1 2/9] ata_piix: sata_write must take a const void argument.
Tom Rini
- [U-Boot] [PATCH v1 3/9] dwc_ahsata: Make sata_write() comply with <part.h>
Tom Rini
- [U-Boot] [PATCH v1 4/9] fsl_sata: Make sata_{read, write}() comply with <part.h>
Tom Rini
- [U-Boot] [PATCH v1 5/9] pata_bfin: Make sata_{read, write}() comply with <part.h>
Tom Rini
- [U-Boot] [PATCH v1 6/9] sata_dwc: Make sata_write() use const void, per <part.h>
Tom Rini
- [U-Boot] [PATCH v1 7/9] sil_sata: Make sata_write() comply with <part.h>
Tom Rini
- [U-Boot] [PATCH v1 8/9] ide.h: Make ide_(read|write) match block_dev_desc_t block_(read|write)
Tom Rini
- [U-Boot] [PATCH v1 9/9] sata.h: Make all sata/ata drivers include <sata.h>
Tom Rini
- [U-Boot] [PATCH v2] mx6: Remove lowlevel_init.S
Fabio Estevam
- [U-Boot] [PATCH 00/72 V3] serial: Massive rework of the serial subsystem
Marek Vasut
- [U-Boot] [PATCH 01/72] serial: Coding style cleanup of struct serial_device
Marek Vasut
- [U-Boot] [PATCH 02/72] serial: Rename .init() and .uninit() in serial_device
Marek Vasut
- [U-Boot] [PATCH 03/72] serial: Properly spell out the structure member names of serial_driver
Marek Vasut
- [U-Boot] [PATCH 04/72] serial: pxa: Implement default_serial_console in serial_pxa.c
Marek Vasut
- [U-Boot] [PATCH 05/72] serial: pxa: Make use of default_serial_console in serial_pxa
Marek Vasut
- [U-Boot] [PATCH 06/72] serial: pxa: Make local functions static
Marek Vasut
- [U-Boot] [PATCH 07/72] serial: mpc512x: Properly define CONFIG_SYS_PSC3 in config files
Marek Vasut
- [U-Boot] [PATCH 08/72] serial: Implement serial_initfunc() macro
Marek Vasut
- [U-Boot] [PATCH 09/72] serial: mpc8xx: Move serial registration from serial_initialize()
Marek Vasut
- [U-Boot] [PATCH 10/72] serial: s3c24xx: Move serial registration from serial_initialize()
Marek Vasut
- [U-Boot] [PATCH 11/72] serial: pxa: Move serial registration from serial_initialize()
Marek Vasut
- [U-Boot] [PATCH 12/72] serial: s5p: Move serial registration from serial_initialize()
Marek Vasut
- [U-Boot] [PATCH 13/72] serial: microblaze: Move serial registration from serial_initialize()
Marek Vasut
- [U-Boot] [PATCH 14/72] serial: mpc512x: Move serial registration from serial_initialize()
Marek Vasut
- [U-Boot] [PATCH 15/72] serial: ns16550: Move serial registration from serial_initialize()
Marek Vasut
- [U-Boot] [PATCH 16/72] serial: bfin: Remove the bfin_serialN_device exports from serial.h
Marek Vasut
- [U-Boot] [PATCH 17/72] serial: bfin: Adjust serial_register_bfin_uart()
Marek Vasut
- [U-Boot] [PATCH 18/72] serial: zoom2: Remove zoom2 serial prototypes from serial.h
Marek Vasut
- [U-Boot] [PATCH 19/72] serial: bfin: Flip the jtag serial console to CONFIG_SERIAL_MULTI
Marek Vasut
- [U-Boot] [PATCH 20/72] serial: mips: Implement CONFIG_SERIAL_MULTI into au1x00 serial driver
Marek Vasut
- [U-Boot] [PATCH 21/72] serial: mips: Implement CONFIG_SERIAL_MULTI into asc serial driver
Marek Vasut
- [U-Boot] [PATCH 22/72] serial: mips: Implement CONFIG_SERIAL_MULTI into JZ serial driver
Marek Vasut
- [U-Boot] [PATCH 23/72] serial: powerpc: Implement CONFIG_SERIAL_MULTI into mpc5xx serial driver
Marek Vasut
- [U-Boot] [PATCH 24/72] serial: powerpc: Implement CONFIG_SERIAL_MULTI into mpc8220 serial driver
Marek Vasut
- [U-Boot] [PATCH 25/72] serial: powerpc: Implement CONFIG_SERIAL_MULTI into mpc8260 serial drivers
Marek Vasut
- [U-Boot] [PATCH 26/72] serial: powerpc: Implement CONFIG_SERIAL_MULTI into mpc85xx serial driver
Marek Vasut
- [U-Boot] [PATCH 27/72] serial: powerpc: Implement CONFIG_SERIAL_MULTI into iop480 serial driver
Marek Vasut
- [U-Boot] [PATCH 28/72] serial: sparc: Implement CONFIG_SERIAL_MULTI into leon2 serial driver
Marek Vasut
- [U-Boot] [PATCH 29/72] serial: sparc: Implement CONFIG_SERIAL_MULTI into leon3 serial driver
Marek Vasut
- [U-Boot] [PATCH 30/72] serial: powerpc: Implement CONFIG_SERIAL_MULTI into marvell serial driver
Marek Vasut
- [U-Boot] [PATCH 31/72] serial: powerpc: Implement CONFIG_SERIAL_MULTI into amirix serial driver
Marek Vasut
- [U-Boot] [PATCH 32/72] serial: powerpc: Implement CONFIG_SERIAL_MULTI into bmw serial driver
Marek Vasut
- [U-Boot] [PATCH 33/72] serial: powerpc: Implement CONFIG_SERIAL_MULTI into cogent serial driver
Marek Vasut
- [U-Boot] [PATCH 34/72] serial: powerpc: Implement CONFIG_SERIAL_MULTI into cpci750 serial driver
Marek Vasut
- [U-Boot] [PATCH 35/72] serial: powerpc: Implement CONFIG_SERIAL_MULTI into evb64260 serial driver
Marek Vasut
- [U-Boot] [PATCH 36/72] serial: powerpc: Implement CONFIG_SERIAL_MULTI into ml2 serial driver
Marek Vasut
- [U-Boot] [PATCH 37/72] serial: powerpc: Implement CONFIG_SERIAL_MULTI into sconsole serial driver
Marek Vasut
- [U-Boot] [PATCH 38/72] serial: powerpc: Implement CONFIG_SERIAL_MULTI into p3mx serial driver
Marek Vasut
- [U-Boot] [PATCH 39/72] serial: arm: Implement CONFIG_SERIAL_MULTI into altera_jtag serial driver
Marek Vasut
- [U-Boot] [PATCH 40/72] serial: arm: Implement CONFIG_SERIAL_MULTI into altera serial driver
Marek Vasut
- [U-Boot] [PATCH 41/72] serial: arm: Implement CONFIG_SERIAL_MULTI into atmel serial driver
Marek Vasut
- [U-Boot] [PATCH 42/72] serial: arm: Implement CONFIG_SERIAL_MULTI into lpc32xx serial driver
Marek Vasut
- [U-Boot] [PATCH 43/72] serial: mcf: Implement CONFIG_SERIAL_MULTI into MCF serial driver
Marek Vasut
- [U-Boot] [PATCH 44/72] serial: Implement CONFIG_SERIAL_MULTI into ns9750 serial driver
Marek Vasut
- [U-Boot] [PATCH 45/72] serial: oc: Implement CONFIG_SERIAL_MULTI into OpenCores serial driver
Marek Vasut
- [U-Boot] [PATCH 46/72] serial: arm: Implement CONFIG_SERIAL_MULTI into s3c4510b serial driver
Marek Vasut
- [U-Boot] [PATCH 47/72] serial: arm: Implement CONFIG_SERIAL_MULTI into s3c64xx serial driver
Marek Vasut
- [U-Boot] [PATCH 48/72] serial: sandbox: Implement CONFIG_SERIAL_MULTI into sandbox serial driver
Marek Vasut
- [U-Boot] [PATCH 49/72] serial: arm: Implement CONFIG_SERIAL_MULTI into clps7111 serial driver
Marek Vasut
- [U-Boot] [PATCH 50/72] serial: arm: Implement CONFIG_SERIAL_MULTI into imx serial driver
Marek Vasut
- [U-Boot] [PATCH 51/72] serial: arm: Implement CONFIG_SERIAL_MULTI into ixp serial driver
Marek Vasut
- [U-Boot] [PATCH 52/72] serial: arm: Implement CONFIG_SERIAL_MULTI into ks8695 serial driver
Marek Vasut
- [U-Boot] [PATCH 53/72] serial: arm: Implement CONFIG_SERIAL_MULTI into lh7a40x serial driver
Marek Vasut
- [U-Boot] [PATCH 54/72] serial: arm: Implement CONFIG_SERIAL_MULTI into lpc2292 serial driver
Marek Vasut
- [U-Boot] [PATCH 55/72] serial: Implement CONFIG_SERIAL_MULTI into max3100 serial driver
Marek Vasut
- [U-Boot] [PATCH 56/72] serial: arm: Implement CONFIG_SERIAL_MULTI into mxc serial driver
Marek Vasut
- [U-Boot] [PATCH 57/72] serial: arm: Implement CONFIG_SERIAL_MULTI into netarm serial driver
Marek Vasut
- [U-Boot] [PATCH 58/72] serial: arm: Implement CONFIG_SERIAL_MULTI into pl01x serial driver
Marek Vasut
- [U-Boot] [PATCH 59/72] serial: arm: Implement CONFIG_SERIAL_MULTI into s3c44b0 serial driver
Marek Vasut
- [U-Boot] [PATCH 60/72] serial: arm: Implement CONFIG_SERIAL_MULTI into sa1100 serial driver
Marek Vasut
- [U-Boot] [PATCH 61/72] serial: sh: Implement CONFIG_SERIAL_MULTI into sh serial driver
Marek Vasut
- [U-Boot] [PATCH 62/72] serial: mxs: spl: Remove empty serial_* functions from SPL code
Marek Vasut
- [U-Boot] [PATCH 63/72] serial: Use puts() and hang() instead of panic() in SPL
Marek Vasut
- [U-Boot] [PATCH 64/72] serial: ns16550: Call usbtty_poll only in non-SPL build
Marek Vasut
- [U-Boot] [PATCH 65/72] serial: ns16550: Rename serial.c to serial_ns16550.c
Marek Vasut
- [U-Boot] [PATCH 66/72] serial: Move common/serial.c to drivers/serial/
Marek Vasut
- [U-Boot] [PATCH 67/72] serial: Unconditionally enable CONFIG_SERIAL_MULTI
Marek Vasut
- [U-Boot] [PATCH 68/72] serial: Remove CONFIG_SERIAL_MULTI from config files
Marek Vasut
- [U-Boot] [PATCH 69/72] serial: Remove CONFIG_SERIAL_MULTI from serial drivers
Marek Vasut
- [U-Boot] [PATCH 70/72] serial: Remove CONFIG_SERIAL_MULTI from remaining sources
Marek Vasut
- [U-Boot] [PATCH 71/72] serial: Compile drivers/serial/serial.c by default
Marek Vasut
- [U-Boot] [PATCH 72/72] serial: Enhance the manual relocation
Marek Vasut
- [U-Boot] [PATCH 0/5] Linker-generated arrays (take 2)
Marek Vasut
- [U-Boot] [PATCH 1/5] common: Add symbol handling for generic lists into Makefile
Marek Vasut
- [U-Boot] [PATCH 2/5] common: Implement support for linker-generated arrays
Marek Vasut
- [U-Boot] [PATCH 3/5] common: Add .u_boot_list into all linker files
Marek Vasut
- [U-Boot] [PATCH 4/5] common: Convert the U-Boot commands to LG-arrays
Marek Vasut
- [U-Boot] [PATCH 5/5] common: Discard the __u_boot_cmd section
Marek Vasut
- [U-Boot] [PATCH 0/4 V2] Implant kernel-doc from Linux kernel
Marek Vasut
- [U-Boot] [PATCH 1/4] doc: kerneldoc: Implant DocBook from Linux kernel
Marek Vasut
- [U-Boot] [PATCH 2/4] doc: kerneldoc: Add nicer CSS stylesheet for HTML docs
Marek Vasut
- [U-Boot] [PATCH 3/4] doc: kerneldoc: Implement "Example" section handling
Marek Vasut
- [U-Boot] [PATCH 4/4] doc: kerneldoc: tmpl: Implement template for LG-arrays
Marek Vasut
- [U-Boot] [PATCH] fs: fat: Fix mkcksum() function parameters
Marek Vasut
- [U-Boot] Custodians, Maintainers and old platforms
Stefan Kristiansson
- [U-Boot] Custodians, Maintainers and old platforms
Marek Vasut
- [U-Boot] Custodians, Maintainers and old platforms
R, Sricharan
- [U-Boot] [PATCH 65/72] serial: ns16550: Rename serial.c to serial_ns16550.c
Michal Simek
- [U-Boot] [PATCH v1 3/9] dwc_ahsata: Make sata_write() comply with <part.h>
stefano babic
- [U-Boot] [PATCH v2] mx6: Remove lowlevel_init.S
Stefano Babic
- [U-Boot] [PATCH 1/7] mx25: Fix decode_pll
Stefano Babic
- [U-Boot] [PATCH v2 01/14] mx5/6: Define default SoC input clock frequencies
Stefano Babic
- [U-Boot] [PATCH] ARM: arm1176: Define arch_cpu_init() for s3c64xx
Ashok Kumar Reddy
- [U-Boot] [PATCH] mx6qsabreauto: Use ttymxc3 as console
Stefano Babic
- [U-Boot] [PATCH v2 2/4] mx5: Optimize lowlevel_init code size
Stefano Babic
- [U-Boot] [PATCH v2 2/4] mx5: Optimize lowlevel_init code size
Stefano Babic
- [U-Boot] [PATCH] mx31: Add more CCM access macros
Stefano Babic
- [U-Boot] [PATCH 2/3] mx35: Define MAX and AIPS registers
Stefano Babic
- [U-Boot] [PATCH v3] mx25: Clean up lowlevel_init
Stefano Babic
- [U-Boot] [PATCH for-rc] lsxl: also turn off fan in power down mode
Michael Walle
- [U-Boot] Custodians, Maintainers and old platforms
Marek Vasut
- [U-Boot] [PATCH] ARM: arm1176: Define arch_cpu_init() for s3c64xx
Marek Vasut
- [U-Boot] [PATCH 65/72] serial: ns16550: Rename serial.c to serial_ns16550.c
Marek Vasut
- [U-Boot] [PATCH v3] mx25: Clean up lowlevel_init
Benoît Thébaudeau
- [U-Boot] [PATCH v2 01/14] mx5/6: Define default SoC input clock frequencies
Benoît Thébaudeau
- [U-Boot] [PATCH v2 01/14] mx5/6: Define default SoC input clock frequencies
Stefano Babic
- [U-Boot] [PULL] u-boot-testing / dm-serial-1
Marek Vasut
- [U-Boot] [PATCH] configs: mx6qsabre_common.h: Use default clock definitions
Fabio Estevam
- [U-Boot] [PATCH v2] configs: mx6qsabre_common.h: Use default clock definitions
Fabio Estevam
- [U-Boot] [PATCH] tpm: Remove the LPC TPM driver
Marek Vasut
- [U-Boot] [PATCH 1/6] arm: Remove support for lpc2292
Marek Vasut
- [U-Boot] [PATCH 2/6] arm: Remove support for s3c4510
Marek Vasut
- [U-Boot] [PATCH 3/6] arm: Remove support for NETARM
Marek Vasut
- [U-Boot] [PATCH 4/6] stdio: Remove the CLPS7111 serial driver
Marek Vasut
- [U-Boot] [PATCH 5/6] arm720: Further clean up the arm720t directory
Marek Vasut
- [U-Boot] [PATCH 6/6] arm720: Remove CONFIG_ARM7_REVD
Marek Vasut
- [U-Boot] [PATCH] tpm: Remove the LPC TPM driver
Vadim Bendebury
- [U-Boot] [PATCH] tpm: Remove the LPC TPM driver
Marek Vasut
- [U-Boot] [PATCH 1/2] mmc: pxa: Flip over the remaining boards to pxa_mmc_generic
Marek Vasut
- [U-Boot] [PATCH 2/2] mmc: pxa: Remove the old non-generic PXA MMC driver
Marek Vasut
Last message date:
Sun Sep 30 22:09:50 CEST 2012
Archived on: Sun Sep 30 22:10:12 CEST 2012
This archive was generated by
Pipermail 0.09 (Mailman edition).