[U-Boot] [PATCH v2 1/6] h2200: Add support for iPAQ h2200 palmtop

[Marek Vasut]

Dear Łukasz Dałek,

> On 24.09.2012 01:05, Marek Vasut wrote:
> > Dear Łukasz Dałek,
> > 
> >> On 23.09.2012 23:31, Marek Vasut wrote:
> >>> Dear Łukasz Dałek,
> >>> 
> >>>> On 23.09.2012 23:04, Marek Vasut wrote:
> >>>>> PXA2xx is OHCI host with one OTG port.
> >>>>> 
> >>>>      From pxa255 documentation:
> >>>> "The UDC supports 16 endpoints and can operate half-duplex at a rate
> >>>> of 12 Mbps (as a slave only,
> >>>> not as a host or hub controller)."
> >>>> 
> >>>>> what about include/usb/pxa27x_udc.h ... btw can't pxa27x and pxa25x
> >>>>> UDC use the same driver?
> >>>> 
> >>>> pxa27x_udc driver is using older layer which doesn't work with usb
> >>>> ethernet driver.
> >>>> 
> >>>> Btw. pxa27x can be host, pxa25x can't.
> >>> 
> >>> Can you update the new gadget driver to be compatible with pxa27x then
> >>> ?
> >> 
> >> I don't have any board with pxa27x processor. And I'm quite sure that
> >> differences between pxa25x and pxa27x usb are too big. Even in
> >> Linux kernel are two separate drivers for 25x and 27x chips.
> > 
> > Isn't the 25x only a subset of the 27x ?
> 
> Maybe it is.
> 
> You've asked me if I could update driver to compatible with pxa27x and my
> answer is no. Maybe someone with pxa27x chip could.

I can test it. It'd be good to have only one driver and get rid of the old one 
seems to be the way to go.

> I will left that h2200.h header. I'm sure that it will be helpful some day.

For what exactly? Just put it into include/usb.h .

> Łukasz Dałek

Best regards,
Marek Vasut