[U-Boot] [PATCH v2 01/11] ARM: fix relocation on ARM926EJS

[Marek Vasut]

Dear José Miguel Gonçalves,

> Jumping to board_init_r is not performed due to a bug on address
> computation.

Is your CONFIG_SYS_TEXT_BASE configured correctly? I don't detect any 
misbehavior on my arm926 boards.

> Relocation offsets are not needed when building SPL.

Do they cause any trouble?

> Signed-off-by: José Miguel Gonçalves <jose.goncalves at inov.pt>
> ---
> Changes for v2:
>    - None
> ---
>  arch/arm/cpu/arm926ejs/start.S |    4 +++-
>  1 file changed, 3 insertions(+), 1 deletion(-)
> 
> diff --git a/arch/arm/cpu/arm926ejs/start.S
> b/arch/arm/cpu/arm926ejs/start.S index 6f05f1a..2da5342 100644
> --- a/arch/arm/cpu/arm926ejs/start.S
> +++ b/arch/arm/cpu/arm926ejs/start.S
> @@ -325,7 +325,7 @@ _nand_boot_ofs:
>  	.word nand_boot
>  #else
>  	ldr	r0, _board_init_r_ofs
> -	ldr	r1, _TEXT_BASE
> +	adr	r1, _start
>  	add	lr, r0, r1
>  	add	lr, lr, r9
>  	/* setup parameters for board_init_r */
> @@ -338,12 +338,14 @@ _board_init_r_ofs:
>  	.word board_init_r - _start
>  #endif
> 
> +#ifndef CONFIG_SPL_BUILD
>  _rel_dyn_start_ofs:
>  	.word __rel_dyn_start - _start
>  _rel_dyn_end_ofs:
>  	.word __rel_dyn_end - _start
>  _dynsym_start_ofs:
>  	.word __dynsym_start - _start
> +#endif
> 
>  /*
>   *************************************************************************

Best regards,
Marek Vasut