[U-Boot] [PATCH 06/13] mxc nand: Access all ecc_status_result fields
Scott Wood
scottwood at freescale.com
Tue Sep 18 02:39:35 CEST 2012
On Mon, Aug 13, 2012 at 10:49:42PM +0200, Benoît Thébaudeau wrote:
> On the NFC IP 1.1, the 32-bit ecc_status_result value comes from 2
> consecutive 16-bit registers. This patch reads all the fields of this value,
> which makes a difference for 4-kiB NF pages.
>
> Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau at advansee.com>
> Cc: Scott Wood <scottwood at freescale.com>
> Cc: Stefano Babic <sbabic at denx.de>
> ---
> .../drivers/mtd/nand/mxc_nand.c | 2 +-
> .../include/fsl_nfc.h | 3 +--
> .../nand_spl/nand_boot_fsl_nfc.c | 4 ++++
> 3 files changed, 6 insertions(+), 3 deletions(-)
>
> diff --git u-boot-4d3c95f.orig/drivers/mtd/nand/mxc_nand.c u-boot-4d3c95f/drivers/mtd/nand/mxc_nand.c
> index 62d8c6b..4564b25 100644
> --- u-boot-4d3c95f.orig/drivers/mtd/nand/mxc_nand.c
> +++ u-boot-4d3c95f/drivers/mtd/nand/mxc_nand.c
> @@ -653,7 +653,7 @@ static int mxc_nand_correct_data(struct mtd_info *mtd, u_char *dat,
> {
> struct nand_chip *nand_chip = mtd->priv;
> struct mxc_nand_host *host = nand_chip->priv;
> - uint16_t ecc_status = readw(&host->regs->ecc_status_result);
> + uint32_t ecc_status = readl(&host->regs->ecc_status_result);
> int subpages = mtd->writesize / nand_chip->subpagesize;
> int pg2blk_shift = nand_chip->phys_erase_shift -
> nand_chip->page_shift;
> diff --git u-boot-4d3c95f.orig/include/fsl_nfc.h u-boot-4d3c95f/include/fsl_nfc.h
> index 1c16c71..c248cef 100644
> --- u-boot-4d3c95f.orig/include/fsl_nfc.h
> +++ u-boot-4d3c95f/include/fsl_nfc.h
> @@ -94,8 +94,7 @@ struct fsl_nfc_regs {
> u16 flash_addr;
> u16 flash_cmd;
> u16 config;
> - u16 ecc_status_result;
> - u16 ecc_status_result2;
> + u32 ecc_status_result;
> u16 spare_area_size;
> u16 wrprot;
> u16 reserved3[2];
> diff --git u-boot-4d3c95f.orig/nand_spl/nand_boot_fsl_nfc.c u-boot-4d3c95f/nand_spl/nand_boot_fsl_nfc.c
> index 842943c..4c5a7fe 100644
> --- u-boot-4d3c95f.orig/nand_spl/nand_boot_fsl_nfc.c
> +++ u-boot-4d3c95f/nand_spl/nand_boot_fsl_nfc.c
> @@ -139,7 +139,11 @@ static void nfc_nand_data_output(void)
>
> static int nfc_nand_check_ecc(void)
> {
> +#if defined(MXC_NFC_V1)
> return readw(&nfc->ecc_status_result);
> +#elif defined(MXC_NFC_V1_1)
> + return readl(&nfc->ecc_status_result);
> +#endif
> }
On MXC_NFC_V1 you're using readw() on a u32 -- that's not OK, even if the
ARM accessors let you get away with it. Use a union or #ifdef the struct
definition, or just always readl() if you can get away with it, or do two
readw()s on V1_1.
-Scott
More information about the U-Boot
mailing list