[U-Boot] [PATCH v3 4/4] ARM: add support for d2 Network v2

[Simon Guinot]

This patch adds support for the LaCie board d2 Network v2 which share
a lot of hardware caracteristics with the 2Big Network v2.

- CPU: Marvell 88F6281 1200Mhz
- SDRAM memory: 256MB DDR2 400Mhz
- 2 SATA ports: internal and eSATA
- Gigabit ethernet: PHY Marvell 88E1116R
- Flash memory: SPI NOR 512KB (Macronix MX25L4005A)
- i2c EEPROM: 512 bytes (24C04 type)
- 2 USB2 ports: host and host/device
- 1 push button
- 1 power switch
- 1 SATA LED (bi-color, blue and red)

Signed-off-by: Simon Guinot <simon.guinot at sequanux.org>
---
Changes for v3:
 - Rebased against u-boot-mv/master and u-boot-arm/master.

No changes for v2.

 boards.cfg                 |    1 +
 include/configs/lacie_kw.h |   10 ++++++++--
 2 files changed, 9 insertions(+), 2 deletions(-)

diff --git a/boards.cfg b/boards.cfg
index e4613a9..2c7d351 100644
--- a/boards.cfg
+++ b/boards.cfg
@@ -160,6 +160,7 @@ kmnusa                       arm         arm926ejs   km_arm              keymile
 mgcoge3un                    arm         arm926ejs   km_arm              keymile        kirkwood    km_kirkwood:KM_MGCOGE3UN
 kmcoge5un                    arm         arm926ejs   km_arm              keymile        kirkwood    km_kirkwood:KM_COGE5UN
 portl2                       arm         arm926ejs   km_arm              keymile        kirkwood    km_kirkwood:KM_PORTL2
+d2net_v2                     arm         arm926ejs   net2big_v2          LaCie          kirkwood        lacie_kw:D2NET_V2
 inetspace_v2                 arm         arm926ejs   netspace_v2         LaCie          kirkwood	lacie_kw:INETSPACE_V2
 net2big_v2                   arm         arm926ejs   net2big_v2          LaCie          kirkwood	lacie_kw:NET2BIG_V2
 netspace_lite_v2             arm         arm926ejs   netspace_v2         LaCie          kirkwood	lacie_kw:NETSPACE_LITE_V2
diff --git a/include/configs/lacie_kw.h b/include/configs/lacie_kw.h
index b00c352..3c0f838 100644
--- a/include/configs/lacie_kw.h
+++ b/include/configs/lacie_kw.h
@@ -36,6 +36,9 @@
 #elif defined(CONFIG_NETSPACE_MAX_V2)
 #define CONFIG_MACH_TYPE		MACH_TYPE_NETSPACE_MAX_V2
 #define CONFIG_IDENT_STRING		" NS Max v2"
+#elif defined(CONFIG_D2NET_V2)
+#define CONFIG_MACH_TYPE		MACH_TYPE_D2NET_V2
+#define CONFIG_IDENT_STRING		" D2 v2"
 #elif defined(CONFIG_NET2BIG_V2)
 #define CONFIG_MACH_TYPE		MACH_TYPE_NET2BIG_V2
 #define CONFIG_IDENT_STRING		" 2Big v2"
@@ -106,7 +109,9 @@
 #define CONFIG_ENV_SPI_MAX_HZ           20000000 /* 20Mhz */
 #define CONFIG_SYS_IDE_MAXBUS           1
 #define CONFIG_SYS_IDE_MAXDEVICE        1
-#if defined(CONFIG_NET2BIG_V2)
+#if defined(CONFIG_D2NET_V2)
+#define CONFIG_SYS_PROMPT		"d2v2> "
+#elif defined(CONFIG_NET2BIG_V2)
 #define CONFIG_SYS_PROMPT		"2big2> "
 #else
 #define CONFIG_SYS_PROMPT		"ns2> "
@@ -126,7 +131,8 @@
  */
 #ifdef CONFIG_MVSATA_IDE
 #define CONFIG_SYS_ATA_IDE0_OFFSET      MV_SATA_PORT0_OFFSET
-#if defined(CONFIG_NETSPACE_MAX_V2) || defined(CONFIG_NET2BIG_V2)
+#if defined(CONFIG_NETSPACE_MAX_V2) || defined(CONFIG_D2NET_V2) || \
+	defined(CONFIG_NET2BIG_V2)
 #define CONFIG_SYS_ATA_IDE1_OFFSET      MV_SATA_PORT1_OFFSET
 #endif
 #endif /* CONFIG_MVSATA_IDE */
-- 
1.7.10