[U-Boot] [PATCH 2/2] i.MX6: mx6qsabrelite: Add splash screen support
Eric Nelson
eric.nelson at boundarydevices.com
Mon Sep 17 22:20:51 CEST 2012
Adds support for the Hannstar 1024 x 768 LVDS panel (Freescale part
number MCIMX-LVDS1) to SABRE-Lite board.
This commit is a rebase Fabio Estevan's patch from 5/31 to
u-boot-video/master:
http://patchwork.ozlabs.org/patch/162206/
Modifications include:
removal of i2c setup (unneeded)
cleanup of lcd_iomux to use struct mxc_ccm_reg and anatop_regs
and associated constants
Signed-off-by: Eric Nelson <eric.nelson at boundarydevices.com>
---
arch/arm/include/asm/arch-mx6/crm_regs.h | 4 +
board/freescale/mx6qsabrelite/mx6qsabrelite.c | 90 +++++++++++++++++++++++++
include/configs/mx6qsabrelite.h | 14 ++++-
3 files changed, 107 insertions(+), 1 deletions(-)
diff --git a/arch/arm/include/asm/arch-mx6/crm_regs.h b/arch/arm/include/asm/arch-mx6/crm_regs.h
index 8388e38..cffc0a1 100644
--- a/arch/arm/include/asm/arch-mx6/crm_regs.h
+++ b/arch/arm/include/asm/arch-mx6/crm_regs.h
@@ -294,6 +294,10 @@ struct mxc_ccm_reg {
#define MXC_CCM_CHSCCDR_IPU1_DI0_CLK_SEL_MASK (0x7)
#define MXC_CCM_CHSCCDR_IPU1_DI0_CLK_SEL_OFFSET 0
+#define CHSCCDR_CLK_SEL_LDB_DI0 3
+#define CHSCCDR_PODF_DIVIDE_BY_3 2
+#define CHSCCDR_IPU_PRE_CLK_540M_PFD 5
+
/* Define the bits in register CSCDR2 */
#define MXC_CCM_CSCDR2_ECSPI_CLK_PODF_MASK (0x3F << 19)
#define MXC_CCM_CSCDR2_ECSPI_CLK_PODF_OFFSET 19
diff --git a/board/freescale/mx6qsabrelite/mx6qsabrelite.c b/board/freescale/mx6qsabrelite/mx6qsabrelite.c
index 909ccca..22943b1 100644
--- a/board/freescale/mx6qsabrelite/mx6qsabrelite.c
+++ b/board/freescale/mx6qsabrelite/mx6qsabrelite.c
@@ -36,6 +36,9 @@
#include <micrel.h>
#include <miiphy.h>
#include <netdev.h>
+#include <linux/fb.h>
+#include <ipu_pixfmt.h>
+#include <asm/arch/crm_regs.h>
DECLARE_GLOBAL_DATA_PTR;
#define UART_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_PUE | \
@@ -195,6 +198,10 @@ static iomux_v3_cfg_t button_pads[] = {
MX6Q_PAD_GPIO_18__GPIO_7_13 | MUX_PAD_CTRL(BUTTON_PAD_CTRL),
};
+iomux_v3_cfg_t lcd_gpio[] = {
+ MX6Q_PAD_SD1_CMD__GPIO_1_18 | MUX_PAD_CTRL(NO_PAD_CTRL),
+};
+
static void setup_iomux_enet(void)
{
gpio_direction_output(87, 0); /* GPIO 3-23 */
@@ -372,10 +379,84 @@ int setup_sata(void)
}
#endif
+static struct fb_videomode lvds_xga = {
+ .name = "Hannstar-XGA",
+ .refresh = 60,
+ .xres = 1024,
+ .yres = 768,
+ .pixclock = 15385,
+ .left_margin = 220,
+ .right_margin = 40,
+ .upper_margin = 21,
+ .lower_margin = 7,
+ .hsync_len = 60,
+ .vsync_len = 10,
+ .sync = FB_SYNC_EXT,
+ .vmode = FB_VMODE_NONINTERLACED
+};
+
+void lcd_iomux(void)
+{
+ struct mxc_ccm_reg *mxc_ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR;
+ struct anatop_regs *anatop = (struct anatop_regs *)ANATOP_BASE_ADDR;
+
+ int reg;
+ /* Turn on GPIO backlight */
+ imx_iomux_v3_setup_multiple_pads(lcd_gpio, ARRAY_SIZE(lcd_gpio));
+ gpio_direction_output(18, 1);
+
+ /* Turn on LDB0,IPU,IPU DI0 clocks */
+ reg = __raw_readl(&mxc_ccm->CCGR3);
+ reg |= 0x300F;
+ writel(reg, &mxc_ccm->CCGR3);
+
+ /* set PFD3_FRAC to 0x13 == 455 MHz (480*18)/0x13 */
+ writel(0x00003F00, &anatop->pfd_480_clr);
+ writel(0x00001300, &anatop->pfd_480_set);
+
+ /* set LDB0, LDB1 clk select to 011/011 */
+ reg = readl(&mxc_ccm->cs2cdr);
+ reg &= ~(MXC_CCM_CS2CDR_LDB_DI0_CLK_SEL_MASK
+ |MXC_CCM_CS2CDR_LDB_DI1_CLK_SEL_MASK);
+ reg |= (3<<MXC_CCM_CS2CDR_LDB_DI0_CLK_SEL_OFFSET)
+ |(3<<MXC_CCM_CS2CDR_LDB_DI1_CLK_SEL_OFFSET);
+ writel(reg, &mxc_ccm->cs2cdr);
+
+ reg = readl(&mxc_ccm->cscmr2);
+ reg |= MXC_CCM_CSCMR2_LDB_DI0_IPU_DIV;
+ writel(reg, &mxc_ccm->cscmr2);
+
+ reg = readl(&mxc_ccm->chsccdr);
+ reg &= ~(MXC_CCM_CHSCCDR_IPU1_DI0_PRE_CLK_SEL_MASK
+ |MXC_CCM_CHSCCDR_IPU1_DI0_PODF_MASK
+ |MXC_CCM_CHSCCDR_IPU1_DI0_CLK_SEL_MASK);
+ /* derive clock from LDB_DI0 */
+ /* divide by 3 */
+ /* derive clock from 540M PFD */
+ reg |= (CHSCCDR_CLK_SEL_LDB_DI0
+ <<MXC_CCM_CHSCCDR_IPU1_DI0_CLK_SEL_OFFSET)
+ |(CHSCCDR_PODF_DIVIDE_BY_3
+ <<MXC_CCM_CHSCCDR_IPU1_DI0_PODF_OFFSET)
+ |(CHSCCDR_IPU_PRE_CLK_540M_PFD
+ <<MXC_CCM_CHSCCDR_IPU1_DI0_PRE_CLK_SEL_OFFSET);
+ writel(reg, &mxc_ccm->chsccdr);
+
+ writel(0x201, IOMUXC_BASE_ADDR + 0x8); /* 16 bpp */
+}
+
+void lcd_enable(void)
+{
+
+ int ret = ipuv3_fb_init(&lvds_xga, 0, IPU_PIX_FMT_RGB666);
+ if (ret)
+ printf("LCD cannot be configured: %d\n", ret);
+}
+
int board_early_init_f(void)
{
setup_iomux_uart();
setup_buttons();
+ lcd_iomux();
return 0;
}
@@ -396,9 +477,18 @@ int board_init(void)
setup_sata();
#endif
+#ifdef CONFIG_VIDEO
+ lcd_enable();
+#endif
return 0;
}
+int board_late_init(void)
+{
+ setenv("stdout", "serial");
+ return 0;
+}
+
int checkboard(void)
{
puts("Board: MX6Q-Sabre Lite\n");
diff --git a/include/configs/mx6qsabrelite.h b/include/configs/mx6qsabrelite.h
index 72d0154..af249fa 100644
--- a/include/configs/mx6qsabrelite.h
+++ b/include/configs/mx6qsabrelite.h
@@ -39,9 +39,10 @@
#define CONFIG_REVISION_TAG
/* Size of malloc() pool */
-#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 2 * 1024 * 1024)
+#define CONFIG_SYS_MALLOC_LEN (10 * 1024 * 1024)
#define CONFIG_BOARD_EARLY_INIT_F
+#define CONFIG_BOARD_LATE_INIT
#define CONFIG_MISC_INIT_R
#define CONFIG_MXC_GPIO
@@ -121,6 +122,17 @@
/* Miscellaneous commands */
#define CONFIG_CMD_BMODE
+/* Framebuffer and LCD */
+#define CONFIG_VIDEO
+#define CONFIG_VIDEO_IPUV3
+#define CONFIG_CFB_CONSOLE
+#define CONFIG_VGA_AS_SINGLE_DEVICE
+#define CONFIG_VIDEO_BMP_RLE8
+#define CONFIG_SPLASH_SCREEN
+#define CONFIG_BMP_16BPP
+#define CONFIG_VIDEO_LOGO
+#define CONFIG_IPUV3_CLK 260000000
+
/* allow to overwrite serial and ethaddr */
#define CONFIG_ENV_OVERWRITE
#define CONFIG_CONS_INDEX 1
--
1.7.9
More information about the U-Boot
mailing list