[U-Boot] Resets on mx6qsabrelite

[Fabio Estevam]

Hi,

I am getting reset when using latest U-boot mainline with
mx6qsabrelite and loading a kernel.


U-Boot 2012.07-00580-g49b3962 (Sep 19 2012 - 09:56:23)

CPU:   Freescale i.MX6Q rev1.0 at 792 MHz
Reset cause: POR
Board: MX6Q-Sabre Lite
DRAM:  1 GiB
WARNING: Caches not enabled
MMC:   FSL_SDHC: 0, FSL_SDHC: 1
In:    serial
Out:   serial
Err:   serial
Net:   FEC
Hit any key to stop autoboot:  0
Using FEC device
TFTP from server 192.168.1.103; our IP address is 192.168.1.108
Filename 'uImage'.
Load address: 0x12000000
Loading: #################################################################
         #################################################################
         #################################################################
         #########################
done
Bytes transferred = 3220080 (312270 hex)
Using FEC device
TFTP from server 192.168.1.103; our IP address is 192.168.1.108
Filename 'imx6q-sabrelite.dtb'.
Load address: 0x11ff0000
Loading: #
done
Bytes transferred = 13715 (3593 hex)
## Booting kernel from Legacy Image at 12000000 ...
   Image Name:   Linux-3.5.3
   Image Type:   ARM Linux Kernel Image (uncompressed)
   Data Size:    3220016 Bytes = 3.1 MiB
   Load Address: 10008000
   Entry Point:  10008000
   Verifying Checksum ... OK
## Flattened Device Tree blob at 11ff0000
   Booting using the fdt blob at 0x11ff0000
   Loading Kernel Image ... OK
OK
   Using Device Tree in place at 11ff0000, end 11ff6592
data abort
pc : [<4ff81fd8>]          lr : [<4ff75950>]
sp : 4fd6fb90  ip : 11ff028c     fp : 00000000
r10: 4ffae980  r9 : 00000000     r8 : 4fd6ff60
r7 : 11ff0000  r6 : 00000000     r5 : 00000000  r4 : 4ffae980
r3 : 00000000  r2 : 4ffa2529     r1 : 4fd6fb88  r0 : 11ff0000
Flags: nZCv  IRQs off  FIQs off  Mode SVC_32
Resetting CPU ...

resetting ...


U-Boot 2012.07-00580-g49b3962 (Sep 19 2012 - 09:56:23)

Does anyone experience the same issue?

Any ideas before I start bisecting this?

Thanks,

Fabio Estevam