[U-Boot] [PATCH v4 0/6] Code cleaup for trats and universal

Minkyu Kang promsoft at gmail.com
Fri Sep 28 10:40:17 CEST 2012


Dear Piotr Wilczek,

On 20 September 2012 19:19, Piotr Wilczek <p.wilczek at samsung.com> wrote:
> This patch fixes SDRAM configuration and size visibility fot Trats board.
>
> Code for MMC initialisation is moved from board file to pinmux.
> MMC0 and MMC2 are supported. Both tested on Trats and Universal C210 boards.
> MMC initialisation for boards Trats and Universal C210 is done using pinmux.
>
> Low level initialisation in u-boot is eliminated as it is done by
> another bootloader.
>
> Changes for v2:
> - mmc initialisation using pinmux
> - mmc initialisation code moved to pinmux instead of creating a new common code file
> Changes for v3:
> - init SD card also when eMMC init failed
> Changes for v4:
> - eliminated warning for uninitialized bank, bank_ext
>
> Piotr Wilczek (6):
>   arm:exynos4:trats: Correct SDRAM configuration for trats
>   arm:exynos4:trats: Fix SDRAM size
>   arm:exynos4:pinmux: Modify the gpio function for mmc
>   arm:exynos4:trats: Use pinmux for mmc configuration
>   arm:exynos4:universal: Use pinmux for mmc configuration
>   arm:exynos4:universal: Eliminated low level init
>
>  arch/arm/cpu/armv7/exynos/pinmux.c           |   58 ++++
>  arch/arm/include/asm/arch-exynos/periph.h    |    1 +
>  board/samsung/trats/trats.c                  |   76 ++----
>  board/samsung/universal_c210/Makefile        |    1 -
>  board/samsung/universal_c210/lowlevel_init.S |  395 --------------------------
>  board/samsung/universal_c210/universal.c     |   82 ++----
>  include/configs/s5pc210_universal.h          |    2 +
>  include/configs/trats.h                      |   17 +-
>  8 files changed, 114 insertions(+), 518 deletions(-)
>  delete mode 100644 board/samsung/universal_c210/lowlevel_init.S
>

applied to u-boot-samsung.

Thanks.
Minkyu Kang.
-- 
from. prom.
www.promsoft.net


More information about the U-Boot mailing list