[U-Boot] [PATCH] am33xx: Enable DDR3 for DDR3 version of beaglebone

[Jason Kridner]

On Tue, Sep 25, 2012 at 12:49 PM, Joel A Fernandes <joelagnel at ti.com> wrote:
> DDR3 support is tested and working with beaglebone hardware. Include a check
> for this board type and configure DDR3. The timings and other configuration
> match EVM SK.
>
> Signed-off-by: Joel A Fernandes <joelagnel at ti.com>

Acked-by: Jason Kridner <jdk at ti.com>

> ---
>  arch/arm/cpu/armv7/am33xx/board.c |    9 +++++++--
>  1 file changed, 7 insertions(+), 2 deletions(-)
>
> diff --git a/arch/arm/cpu/armv7/am33xx/board.c b/arch/arm/cpu/armv7/am33xx/board.c
> index ecc2671..13615cd 100644
> --- a/arch/arm/cpu/armv7/am33xx/board.c
> +++ b/arch/arm/cpu/armv7/am33xx/board.c
> @@ -64,6 +64,11 @@ static inline int board_is_bone(void)
>         return !strncmp(header.name, "A335BONE", HDR_NAME_LEN);
>  }
>
> +static inline int board_is_bone_lt(void)
> +{
> +       return !strncmp(header.name, "A335BNLT", HDR_NAME_LEN);
> +}
> +
>  static inline int board_is_evm_sk(void)
>  {
>         return !strncmp("A335X_SK", header.name, HDR_NAME_LEN);
> @@ -124,7 +129,7 @@ static int read_eeprom(void)
>  static short inline board_memory_type(void)
>  {
>         /* The following boards are known to use DDR3. */
> -       if (board_is_evm_sk())
> +       if (board_is_evm_sk() || board_is_bone_lt())
>                 return EMIF_REG_SDRAM_TYPE_DDR3;
>
>         return EMIF_REG_SDRAM_TYPE_DDR2;
> @@ -283,7 +288,7 @@ int board_eth_init(bd_t *bis)
>                         return -1;
>         }
>
> -       if (board_is_bone()) {
> +       if (board_is_bone() || board_is_bone_lt()) {
>                 writel(MII_MODE_ENABLE, &cdev->miisel);
>                 cpsw_slaves[0].phy_if = cpsw_slaves[1].phy_if =
>                                 PHY_INTERFACE_MODE_MII;
> --
> 1.7.9.5
>
> _______________________________________________
> U-Boot mailing list
> U-Boot at lists.denx.de
> http://lists.denx.de/mailman/listinfo/u-boot