[U-Boot] [PATCH 3/4 v2] arm: Support new Xilinx Zynq platform

[Michal Simek]

On 09/13/2012 11:32 AM, Marek Vasut wrote:
> Dear Michal Simek,
>
>> On 08/16/2012 08:30 AM, Michal Simek wrote:
>>> Add timer driver.
>>>
>>> Signed-off-by: Michal Simek <monstr at monstr.eu>
>>>
>>> ---
>>> v2: Move lowlevel_init.S from board to cpu folder
>>>
>>>       Remove XPSS prefix
>>>       Rename XSCUTIMER -> SCUTIMER
>>>
>>> Keep timer in zynq folder till ARM custodian comments it.
>>> ---
>>>
>>>    arch/arm/cpu/armv7/zynq/Makefile        |   52 +++++++++++
>>>    arch/arm/cpu/armv7/zynq/lowlevel_init.S |   27 ++++++
>>>    arch/arm/cpu/armv7/zynq/timer.c         |  151
>>>    +++++++++++++++++++++++++++++++ 3 files changed, 230 insertions(+), 0
>>>    deletions(-)
>>>    create mode 100644 arch/arm/cpu/armv7/zynq/Makefile
>>>    create mode 100644 arch/arm/cpu/armv7/zynq/lowlevel_init.S
>>>    create mode 100644 arch/arm/cpu/armv7/zynq/timer.c
>>
>> We haven't got any reaction for Albert.
>> Marek and Joe: Can you review this? And give me your ACK or NACK.
>
> Oh I'll gladly torture you :-)

Go ahead. :-)

>
> btw I might need a bit of a review for a ublaze stuff eventually and maybe some
> xilinx uart too, there's a large stdio patchset I have queued. Would you review
> please?

Feel free to contact me if you need any help with any xilinx stuff. Microblaze/xilinx ppc
or current arm code.
I am keen to change current code to u-boot new standard and also with dts support.

Thanks,
Michal

-- 
Michal Simek, Ing. (M.Eng)
w: www.monstr.eu p: +42-0-721842854
Maintainer of Linux kernel 2.6 Microblaze Linux - http://www.monstr.eu/fdt/
Microblaze U-BOOT custodian