[U-Boot] [PATCH 13/70] serial: microblaze: Move serial registration from serial_initialize()
Marek Vasut
marex at denx.de
Sat Sep 29 02:30:30 CEST 2012
Move the registration of xuartlite_serialN_device ports from
default serial_initialize() into driver specific function called from
serial_initialize(). This slims down the serial_initialize() call
to a bare tracker of all possible serial port registration routines
in U-Boot.
The newly implemented xuartlite_serial_initialize() function, which is
implemented inside of the serial_xuartlite driver allows encapsulation
of xuartlite_serialN_device within the serial_xuartlite driver itself.
Also, remove the exports of xuartlite_serialN_device from include/serial.h
as they are no longer needed. This is simply because the implementation of
default_serial_console() is wrapped into the serial_xuartlite driver and
the default console is picked by CONFIG_SERIAL<N> macro in config file.
Signed-off-by: Marek Vasut <marex at denx.de>
Cc: Marek Vasut <marek.vasut at gmail.com>
Cc: Tom Rini <trini at ti.com>
Cc: Michal Simek <monstr at monstr.eu>
---
common/serial.c | 16 ++--------------
drivers/serial/serial_xuartlite.c | 16 ++++++++++++++++
include/serial.h | 7 -------
3 files changed, 18 insertions(+), 21 deletions(-)
diff --git a/common/serial.c b/common/serial.c
index c021c3f..e19a17f 100644
--- a/common/serial.c
+++ b/common/serial.c
@@ -44,6 +44,7 @@ serial_initfunc(mpc8xx_serial_initialize);
serial_initfunc(pxa_serial_initialize);
serial_initfunc(s3c24xx_serial_initialize);
serial_initfunc(s5p_serial_initialize);
+serial_initfunc(uartlite_serial_initialize);
void serial_register(struct serial_device *dev)
{
@@ -97,20 +98,7 @@ void serial_initialize(void)
#if defined(CONFIG_SYS_BFIN_UART)
serial_register_bfin_uart();
#endif
-#if defined(CONFIG_XILINX_UARTLITE)
-# ifdef XILINX_UARTLITE_BASEADDR
- serial_register(&uartlite_serial0_device);
-# endif /* XILINX_UARTLITE_BASEADDR */
-# ifdef XILINX_UARTLITE_BASEADDR1
- serial_register(&uartlite_serial1_device);
-# endif /* XILINX_UARTLITE_BASEADDR1 */
-# ifdef XILINX_UARTLITE_BASEADDR2
- serial_register(&uartlite_serial2_device);
-# endif /* XILINX_UARTLITE_BASEADDR2 */
-# ifdef XILINX_UARTLITE_BASEADDR3
- serial_register(&uartlite_serial3_device);
-# endif /* XILINX_UARTLITE_BASEADDR3 */
-#endif /* CONFIG_XILINX_UARTLITE */
+ uartlite_serial_initialize();
serial_assign(default_serial_console()->name);
}
diff --git a/drivers/serial/serial_xuartlite.c b/drivers/serial/serial_xuartlite.c
index b3bb066..164497e 100644
--- a/drivers/serial/serial_xuartlite.c
+++ b/drivers/serial/serial_xuartlite.c
@@ -181,4 +181,20 @@ __weak struct serial_device *default_serial_console(void)
return NULL;
}
+
+void uartlite_serial_initialize(void)
+{
+#ifdef XILINX_UARTLITE_BASEADDR
+ serial_register(&uartlite_serial0_device);
+#endif /* XILINX_UARTLITE_BASEADDR */
+#ifdef XILINX_UARTLITE_BASEADDR1
+ serial_register(&uartlite_serial1_device);
+#endif /* XILINX_UARTLITE_BASEADDR1 */
+#ifdef XILINX_UARTLITE_BASEADDR2
+ serial_register(&uartlite_serial2_device);
+#endif /* XILINX_UARTLITE_BASEADDR2 */
+#ifdef XILINX_UARTLITE_BASEADDR3
+ serial_register(&uartlite_serial3_device);
+#endif /* XILINX_UARTLITE_BASEADDR3 */
+}
#endif /* CONFIG_SERIAL_MULTI */
diff --git a/include/serial.h b/include/serial.h
index 773eace..51a044d 100644
--- a/include/serial.h
+++ b/include/serial.h
@@ -50,13 +50,6 @@ extern struct serial_device serial4_device;
extern struct serial_device serial6_device;
#endif
-#if defined(CONFIG_XILINX_UARTLITE)
-extern struct serial_device uartlite_serial0_device;
-extern struct serial_device uartlite_serial1_device;
-extern struct serial_device uartlite_serial2_device;
-extern struct serial_device uartlite_serial3_device;
-#endif
-
#if defined(CONFIG_OMAP3_ZOOM2)
extern struct serial_device zoom2_serial_device0;
extern struct serial_device zoom2_serial_device1;
--
1.7.10.4
More information about the U-Boot
mailing list