[U-Boot] [PATCH V2 14/21] mx6q_4x_mt41j128.cfg: skip initiailizing non-existent memory

Troy Kisky troy.kisky at boundarydevices.com
Sat Sep 22 04:39:11 CEST 2012


Sabrelite does not have memory associated with CS1

Signed-off-by: Troy Kisky <troy.kisky at boundarydevices.com>
---
 board/freescale/imx/ddr/mx6q_4x_mt41j128.cfg |    5 -----
 1 file changed, 5 deletions(-)

diff --git a/board/freescale/imx/ddr/mx6q_4x_mt41j128.cfg b/board/freescale/imx/ddr/mx6q_4x_mt41j128.cfg
index 904276a..18cdb7b 100644
--- a/board/freescale/imx/ddr/mx6q_4x_mt41j128.cfg
+++ b/board/freescale/imx/ddr/mx6q_4x_mt41j128.cfg
@@ -161,20 +161,15 @@ WRITE_ENTRY1(MMDC_P0 + MMDC_MDCTL, 0x831A0000)
 
 /* MDSCR, con_req, LOAD MR2, CS0, A3,A10 set (CAS Write=6), RZQ/2 */
 WRITE_ENTRY1(MMDC_P0 + MMDC_MDSCR, 0x04088032)
-WRITE_ENTRY1(MMDC_P0 + MMDC_MDSCR, 0x0408803A)
 /* LOAD MR3, CS0 */
 WRITE_ENTRY1(MMDC_P0 + MMDC_MDSCR, 0x00008033)
-WRITE_ENTRY1(MMDC_P0 + MMDC_MDSCR, 0x0000803B)
 /* LOAD MR1, CS0, A1,A6 set Rtt=RZQ/2, ODI=RZQ/7 */
 WRITE_ENTRY1(MMDC_P0 + MMDC_MDSCR, 0x00428031)
-WRITE_ENTRY1(MMDC_P0 + MMDC_MDSCR, 0x00428039)
 /* LOAD MR0, CS0, A6,A8,A11 set CAS=8, WR=8, DLL reset */
 WRITE_ENTRY1(MMDC_P0 + MMDC_MDSCR, 0x09408030)
-WRITE_ENTRY1(MMDC_P0 + MMDC_MDSCR, 0x09408038)
 
 /* ZQ calibrate, CS0 */
 WRITE_ENTRY1(MMDC_P0 + MMDC_MDSCR, 0x04008040)
-WRITE_ENTRY1(MMDC_P0 + MMDC_MDSCR, 0x04008048)
 WRITE_ENTRY1(MMDC_P0 + MMDC_MPZQHWCTRL, 0xA1380003)
 WRITE_ENTRY1(MMDC_P1 + MMDC_MPZQHWCTRL, 0xA1380003)
 
-- 
1.7.9.5



More information about the U-Boot mailing list